Super T -Super Six Vaporizer

[VapnRealtor]

I just ordered this bad boy up and it's just been released from Super T Manufacturing. Will start shipping in 4-6 weeks

Specs-

-Utilizes two 3.0 volt CR2 batteries (aka 15270) for six volt vaping or one protected 14500 (900mah) for 3.7 volt vaping.

-Same length as the T-1 without a sleeve!

-Three machined in 30 degree Vent holes to direct away from your face in case of battery failure

-Just over 17mm thick! In comparison, the BB which takes the same batteries is approx. 22mm in diameter!

-Entire adapter milled from billet stock with machined in threads. They are not a cap with a press in two dollar atomizer thread adapter as so many companies use.

-Button will not break if dropped

-Optional Brass Cap and button

-Works with cartomizers

-Available in 510, 901 or 801 with adjustable draw

-Semi recessed and protected button to prevent misfires.

-All mechanical: No wires, no solder

-Adjustable button for both throw and spring rate

-Nearly 1.5 mm thinner then the Super T-1

Super T Super Six

http://www.supertmanufacturing.com/id47.html

Man this really does look like a work of art IMO.

Derek

Edited November 17, 2009 by VapnRealtor

[TheSmokingMan]

I just ordered this bad boy up

Hey Derek, are you currently using a battery mod? Like a VP unit or a Protégé? Do you have anything other than a stock 510, 901 or 801s to compare it to?

Edited November 17, 2009 by TheSmokingMan

[VapnRealtor]

Hey Derek, are you currently using a battery mod? Like a VP unit or a Protégé? Do you have anything other than a stock 510, 901 or 801s to compare it to?

Yes I sure am and currently have a VP2,Protege,Vp Passthru and a Silver Bullet. I'm confused with your last question so if you could rephrase it I'd be more than happy to answer.

Derek