mvince201 Posted May 1, 2014 Author Posted May 1, 2014 Insufficient airflow... Hmm...may be worth a try. Thanks!
fishguy1123 Posted May 1, 2014 Posted May 1, 2014 Good point troy! If the airflow is poor it causes a the liquid to draw into the coil to much and can cause flooding and it travels up the tube into your mouth, but also lets it flood the batt connection.
mvince201 Posted May 1, 2014 Author Posted May 1, 2014 Good point troy! If the airflow is poor it causes a the liquid to draw into the coil to much and can cause flooding and it travels up the tube into your mouth, but also lets it flood the batt connection. That has to be my problem then. I just have to figure out why I'm not getting airflow. I've been vaping the 1.8 coil for about 2 hours now with no problems, but when I install the 2.5 coil I have 0 airflow. I would automatically assume it was a problem with the coil, but i'm using the very same coil in my mini with no problems lol. Mtdobies 1
mvince201 Posted May 1, 2014 Author Posted May 1, 2014 (edited) Troy, I want one... airflow thingy.. http://www.ebay.com/itm/Kanger-Airflow-Adjustment-Valve-Aerotank-Replacement-Base-/151289487936?pt=LH_DefaultDomain_0&hash=item23398e6240 Im sure they can be found cheaper but I believe thats what you're after! Edited May 1, 2014 by mvince201
Mtdobies Posted May 1, 2014 Posted May 1, 2014 Thank you! I try to buy from vendors on here just cause I know I can trust the quality? Maybe I'm silly but... I do appreciate it though.
Compenstine Posted May 1, 2014 Posted May 1, 2014 Troy, I want one... airflow thingy.. I just added them today Lee. look in the Tank section on my site. $5.99 Tam 1
Compenstine Posted May 1, 2014 Posted May 1, 2014 I added them while you were making your order. I can add one in for yeah with your order and just pay me later like you did the tank. Mtdobies and Tam 2
Aquatroy Posted May 1, 2014 Posted May 1, 2014 I work in a B&M and see these problems everyday, plus I own a dozen protanks, so this should do it.. sorry Montana Dobies, I don't do internut orders...I added them while you were making your order. I can add one in for yeah with your order and just pay me later like you did the tank. I'll take my commission from you tho...where's my coils buddy? Running low.......
Compenstine Posted May 1, 2014 Posted May 1, 2014 I'll take my commission from you tho...where's my coils buddy? Running low....... I'll be getting them done this weekend sir. Plan for them to be going out Monday. Commission..... LMAO on $5.99 hummmm at what 5% that would be about $0.29.
Aquatroy Posted May 1, 2014 Posted May 1, 2014 We should all be that lucky! lol It's not all that fun...somedays it's leaker day..everyone has a problem, and can't fix it themselves...so often I just want to scream "change the fraking coil dude"!!!! Mtdobies and Tam 2
Aquatroy Posted May 1, 2014 Posted May 1, 2014 I'll be getting them done this weekend sir. Plan for them to be going out Monday. Commission..... LMAO on $5.99 hummmm at what 5% that would be about $0.29. I was yanking your chain pal....
fishguy1123 Posted May 1, 2014 Posted May 1, 2014 It's not all that fun...somedays it's leaker day..everyone has a problem, and can't fix it themselves...so often I just want to scream "change the fraking coil dude"!!!! It's called work for a reason.... lol But many would love to have the ability to see and experiment with different things like you. I'm sure it has it's down side as well.
Aquatroy Posted May 1, 2014 Posted May 1, 2014 Don't take me wrong...I love what I do...I don't get paid **** for it, but it's very rewarding. Our shop is more suited for noobs and intermediate vapers... Not really for chasers....we carry a few mods, RBA , RDA , and if you need kanthal or vcts we got em. But it's all about THR in my shop, getting them started..I love noobs, I get to change their lives.... From 18 to 84 I've switched a lot of folks...and I aske a few questions and usually know what juice you'll like in the first ten minutes. All noobs leave my shop vaping, with at least half a clue what their doing, not just parts in a bag...when they come back weeks later and show me the LUV, and respect cuz they know I made a difference. Tam 1
mvince201 Posted May 1, 2014 Author Posted May 1, 2014 Don't take me wrong...I love what I do...I don't get paid **** for it, but it's very rewarding. Our shop is more suited for noobs and intermediate vapers... Not really for chasers....we carry a few mods, RBA , RDA , and if you need kanthal or vcts we got em. But it's all about THR in my shop, getting them started..I love noobs, I get to change their lives.... From 18 to 84 I've switched a lot of folks...and I aske a few questions and usually know what juice you'll like in the first ten minutes. All noobs leave my shop vaping, with at least half a clue what their doing, not just parts in a bag...when they come back weeks later and show me the LUV, and respect cuz they know I made a difference. I really wish we had a better shop where I live. The employee's just don't seem to know as much as they should.
fishguy1123 Posted May 1, 2014 Posted May 1, 2014 Troy, I knew that was your focus after my first week here on vt! Just like the one about your customer going to coachella......
Tam Posted May 2, 2014 Posted May 2, 2014 Troy gives some of the very best customer service I've seen in a B&M on his side of Colorado Springs. Hey, Troy, is the construction done yet?
Aquatroy Posted May 2, 2014 Posted May 2, 2014 MVince. Give me some feedback when you get that new base.. Tam- construction done...now just trying to get them to add some color on the walls.... Tam 1
Eaglewtchr Posted May 2, 2014 Posted May 2, 2014 I really wish we had a better shop where I live. The employee's just don't seem to know as much as they should. Lol, I know where your coming from. I went to my b&m to get my menthol (love their menthol) but, They are idiot's. One of the guys there has a Russian 91% and it leaks out of the air flow hole. Took it apart for him right there in the shop and had him replace the o-ring in the center of the top cap and no more leak. Look, A noob that knows more than they do.. That felt good. Makes me feel like I am actually learning something from everyone here and able to help others.. Tam, Compenstine, Jeffb and 1 other 4
mvince201 Posted May 2, 2014 Author Posted May 2, 2014 MVince. Give me some feedback when you get that new base.. Tam- construction done...now just trying to get them to add some color on the walls.... Will do! Plan to order one tonight.
mvince201 Posted May 2, 2014 Author Posted May 2, 2014 So back to the OP - HERES THE VERDICT: Threw in a new 1.8ohm coil head out of a 5 pack - hits like a champ, and not a drop of leakage, problem solved. Moral of the story: Soon as you buy a protank, throw those POS coils away and go get a 5 pack :P
fishguy1123 Posted May 2, 2014 Posted May 2, 2014 Did the B&M have any thoughts on the issues you had?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now