Battery help!

[Joshuab3687]

Battery "vibrating"? Hmmm...

How tight is the pin against the battery? If its just a little loose you can get a little arcing between the battery and the pin. Can sometimes cause whats called "rattlesnake". Gives a bit of sound and possibly a small vibration. Try getting the pin a little more snug against the battery

[fishguy1123]

are you sure you got a mech lol jk. May have to adjust it a little more

LMAO.....

[joejoevapekins]

If your adjustable pin isn't long enough you can use a small disk magnet for a spacer. Had to use one in an old mod

[Joshuab3687]

If your adjustable pin isn't long enough you can use a small disk magnet for a spacer. Had to use one in an old mod

I'm actually having a similar prob with my new Hades clone. May have to do that. Its working now, but still has a slight battery rattle till I push the button.

[joejoevapekins]

I'm actually having a similar prob with my new Hades clone. May have to do that. Its working now, but still has a slight battery rattle till I push the button.

home depot, lowes, and acehardware has them

[joejoevapekins]

LMAO.....  

I couldn't stop myself lol

[Joshuab3687]

I couldn't stop myself lol

That ain't riiight! Lmao!

[fishguy1123]

That ain't riiight! Lmao!

Only reason your halo doesn't fall off is cuz it got caught on ur horns! lol

Hopefully Yama gets things running smooth now!

[Joshuab3687]

Let us know how its workin for ya Yamankafozi.

We tend to derail topics around here and we don't want you to think its on purpose. We want to help, but like to have fun at each others expense. Lol

[fishguy1123]

Yes, Josh and Joe are very good sources for help with mechs and vapeing in general!! We do have fun, it's part of our charm.... lol In the end we all want to enjoy vapeing and help where we can.

[Joshuab3687]

And Fishguy is our comic relief! He's actaully a clownfish

[fishguy1123]

Haha.. Ok, I'm going to go kick rocks now.... You know, be productive and all..... lol

[yamankafozi]

thanks guys i got it to work

[yamankafozi]

last thing lol, do i got too much cotton in this? http://puu.sh/8q8sT.jpg

edit: is the battery suppose to get hot like the push button D:

Edited April 27, 2014 by yamankafozi

[fishguy1123]

Good, I take all the credit! LMAO.... JK... Enjoy it.

[fishguy1123]

Stop! NO, batts nor the mod should get hot.

[yamankafozi]

o god my hand is burning and my mod is hot as hell

[Joshuab3687]

What is the ohms reading of your coil build?

[Joshuab3687]

Stop! NO, batts nor the mod should get hot.

The only part that may get hot it the atomizer itself, depending on how low of ohms you're running, but the battery and the firing button shoild not be getting hot

[yamankafozi]

dont have an ohm tester D:

[Joshuab3687]

dont have an ohm tester D:

Okay, I'm gonna "try" and not be a butt hole here, but if you dont have an ohms checker, you do NOT need to be building coils!

You could literally blow your face off! The battery can vent and turn your beautiful mod into a hand greneade.

[Joshuab3687]

Immediately take the battery out of your mod and set it aside.

Please don't try using it or your mod till you get an Ohms checker and find out what ohm your build is. It may be too low for your battery to handle.

[yamankafozi]

what should the ohm tester read on a dual coil build. And can they be purchased at walmart?

edit: could you guys link me to the cheapest one..

Edited April 27, 2014 by yamankafozi

[Joshuab3687]

Can't get em at walmart. Try here:

http://101vape.com/meters/170-ohms-meter.html

[Joshuab3687]

I need to ask you a few questions Yam.

1st. What guage wire are you using

2nd. What size rod did you use to wrap the coils with.

3rd. How many wraps did you do (each coil)

4th. What battery are you using? Do you know the nominal amp rating (not peak amps)

5th. Where did you learn how to build your own coils? (Youtube?)

6th. How long were you holding the fire button for before the mod started getting hot?

Edited April 27, 2014 by Joshuab3687