Vaper17 Posted April 25, 2014 Share Posted April 25, 2014 Hi, I am new to vaping and I just recently bought my first mod. I purchased the K1 Telescopic mod. This is different from the K100 that I've seen because the button is on the side instead of the bottom. I can't seem to find it anywhere online. But I also purchased the Fumiclear 30 tank with the mod. The battery is fully charged but the tank will not work with my mod. The Fumiclear is a 4 set wick tank with 3 wicks on each set and is rated at 2.1 OHMS. My battery is an 18650 battery so it should work, right? My mod originally came with a cartomizer. Please help me!! I've tried charging fully and still does not work! Do certain tanks not work for certain mods? Threads are correct also. 510 threading for both. Link to comment Share on other sites More sharing options...
Compenstine Posted April 25, 2014 Share Posted April 25, 2014 Does your battery shake loosely in the MOD? More than likely it is not making contact somewhere and you need to adjust the contacts Link to comment Share on other sites More sharing options...
Vaportrailer Posted April 25, 2014 Share Posted April 25, 2014 Agree with the above... Even with my latest Zodiac mod, the tolerances are so high, that just a little too much "battery shake" and you make no electrical contact. Check your reset button where your addy attaches to your mod and adjust the mod for 0 batter shake. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now