SpotsyVapor Posted April 25, 2014 Share Posted April 25, 2014 I am looking for a mod to get for my birthday coming up. I have been using a mech mod with an igo-w using an mnke 18650 battery. I have been running right around .3 ohms and I only know that because I have used other peoples mods to check my coils. I don't have anything that will check ohms. Link to comment Share on other sites More sharing options...
Tam Posted April 25, 2014 Share Posted April 25, 2014 You shouldn't use mods to check the ohms of your coils. Those are not always accurate and could pose a safety hazard. The first thing you'll want to get for your birthday coming up is a dedicated ohm checker. Get that even before spending money for a new mod. We want to see you having more than just this birthday. SAFETY FIRST! Link to comment Share on other sites More sharing options...
SpotsyVapor Posted April 25, 2014 Author Share Posted April 25, 2014 Well said tameiki. I am looking into one of those as well. But I still want a digital mod. I like my mech but would like a hella good digital one as well so I know exactly what wattage I am firing at and or voltage. Link to comment Share on other sites More sharing options...
Joshuab3687 Posted April 25, 2014 Share Posted April 25, 2014 Ok. No more checking ohms with APV's! This has to stop! If you don't have an ohms checker, stop building coils and definitely stop sub-ohming! There are a lot of us here that use mech mods and sub-ohm, and we all do it safely or we dont do it! Any tragic failure will end up on the news and we don't want or need any more bad press or scrutiny of our lifestyle! We get posts like this here at least 4-5 times a week. SAFETY FIRST! Sorry for the rant, but this kind of bs has to stop Tam 1 Link to comment Share on other sites More sharing options...
Tam Posted April 25, 2014 Share Posted April 25, 2014 Josh gets a bit excited when he sees posts like this and I really can't blame him. It's dangerous to be building coils without an ohm checker. Mods don't cut it. Link to comment Share on other sites More sharing options...
SpotsyVapor Posted April 25, 2014 Author Share Posted April 25, 2014 I don't fire until I know what I have on deck for one. For two I am right there with you that we vapors don't need any more bad press. I would already have all I need for tools if I was not laid off right when I quit smoking. Link to comment Share on other sites More sharing options...
Tam Posted April 25, 2014 Share Posted April 25, 2014 If you can't afford a $20 ohm checker you certainly can't afford a VV/VW APV... Just sayin' Joshuab3687 1 Link to comment Share on other sites More sharing options...
SpotsyVapor Posted April 25, 2014 Author Share Posted April 25, 2014 Wife always puts money aside for kids and bdays so I know there is money for it soon. I am going to be working at a vApe shop at the beginning of the month as well so I can get stuff a bit cheaper than at most b&m stores and no shipping costs. I figure I can budget for about $120 for toys for my bday Link to comment Share on other sites More sharing options...
Joshuab3687 Posted April 25, 2014 Share Posted April 25, 2014 VV/VW APV's (advanced personal vaporizers: not mods) can range anywhere from $55 to $250. Please... I rather see someone on the news for stealing $20 for an ohm reader than seeing their face ripped to shreds by a mech mod with a coil build checked on an APV that failed and caused a battery to vent. They're cool, to be sure... But they're not toys. A lot of research and knowledge of ohms law and battery safety is PARAMOUNT. They can kill you. Tam and Mtdobies 2 Link to comment Share on other sites More sharing options...
Jeffb Posted April 25, 2014 Share Posted April 25, 2014 You're going to use your kids Birthday money to by ecig stuff? Link to comment Share on other sites More sharing options...
SpotsyVapor Posted April 25, 2014 Author Share Posted April 25, 2014 Josh did you not read all I just wrote. Please review previous posts before migraine starts and I have to start handing out the Tylenol. Jeff, no she puts money aside for all our bdays and Xmas. And all the rest of the years occasions. Link to comment Share on other sites More sharing options...
Mtdobies Posted April 25, 2014 Share Posted April 25, 2014 Your not understanding this is very serious and you really need to follow a learning process, these members have done this and are simply not going to help you blow something up, or someone by diving in cheap and foolishly.. you want to learn the proper way to do this carefully you've got The Best that will help nut you have to do this process by process or no deal. Link to comment Share on other sites More sharing options...
SpotsyVapor Posted April 25, 2014 Author Share Posted April 25, 2014 And I plan to mtdobies. That's why I don't put power to my builds until I know what they are. I want a digital mod so I can keep a constant vApe and know what I am vaping at all times. So on and so on. I don't really want to keep repeating myself. I plan on getting an atty ohm meter as soon as I can. Link to comment Share on other sites More sharing options...
Mtdobies Posted April 25, 2014 Share Posted April 25, 2014 Then wait until you do so, its exciting and clouds are amazing but they can be pretty cool in the meantime, the only clouds you could see if one of these blows up from going about it too fast... I Dont do coils and the fancy stuff so can't help you there.. kand these guys get tired of repeating themselves when people Wont listen to safety so maybe sit back read through the forum stuff and take notes relax.move slower and then ask the questions okay? Link to comment Share on other sites More sharing options...
SpotsyVapor Posted April 25, 2014 Author Share Posted April 25, 2014 I am not sub ohming because I want the clouds but more so that I love the way it delivers the flavor and the way it hits. I have gone from 24% to 6-0% in 2 months. I am just looking for what is right for me and sub ohms deliver that. Said and done. Link to comment Share on other sites More sharing options...
Compenstine Posted April 25, 2014 Share Posted April 25, 2014 And I plan to mtdobies. That's why I don't put power to my builds until I know what they are. I want a digital mod so I can keep a constant vApe and know what I am vaping at all times. So on and so on. I don't really want to keep repeating myself. I plan on getting an atty ohm meter as soon as I can. Go to any Discount Tool store and buy a Multimeter for $9.99. It is more accurate than any APV Repeat, More Accurate than Any APV. APV's will not give you an accurate reading. You keep saying you want the APV so it can tell you these things They are not Accurate... We are not saying this because we are not reading your post, we are, that is why we keep repeating Don'T trust an APV for accurate readings. Mtdobies and Joshuab3687 2 Link to comment Share on other sites More sharing options...
Mtdobies Posted April 25, 2014 Share Posted April 25, 2014 Point taken but won't matter if your doing this in a way you could harm yourself. And you need to get a real grasp on sub-ohm-ing all sides of it or an accident could ruin it for you and hurt the world of vapes for everyone. Link to comment Share on other sites More sharing options...
SpotsyVapor Posted April 25, 2014 Author Share Posted April 25, 2014 I got a free multimeter from harbor freight today but not reading ohms at all I need to take it back. I want to keep as safe as possible don't get me wrong. Mtdobies 1 Link to comment Share on other sites More sharing options...
Joshuab3687 Posted April 25, 2014 Share Posted April 25, 2014 I'll say this, and then I'll get off my soapbox. In your first post, you said that you check your builds on a friends "mod". Did you use something like the MVP, VTR style of device? (Btw, they are APVs. The word "mod" is "generally" reserved for mechs) If so, then you have to understand that they are not a reliable indicator of accurate ohms. As an example, I have built a 0.32 ohm setup using my ohm reader and then on a whim, put the atty on my MVP to check it and it read 0.87. Thats 0.55 +- accuracy. Thats + or - and you'd be hard pressed to get two MVPs to have the same accuracy difference. You "could" possibly be lower than 0.3 ohms and could possibly overstress the battery and cause it to "vent". This could result in turning your mech mod into a hand grenade. If I went a bit overboard, its only 'cause I'm passionate about vaping and the extra levels of safety we need to observe when using mechanical mods. Mtdobies, Tam and Compenstine 3 Link to comment Share on other sites More sharing options...
SpotsyVapor Posted April 25, 2014 Author Share Posted April 25, 2014 Ty josh. And yes I was testing on an mvp2 for my builds. Good to know and Ty. I was getting irritated at you a little bit because you didn't come straight at the issue like you did just now. Had you done so my responses would have been nicer as well. I got my pos harbor freight multimeter to work just now and it says I am running .5 ohms where the mvp2 would not read. I am safe to vApe . Again I don't want grenades and bad publicity the media does a dandy job at finding stupid. I am looking for good advice and vaping friends here. As it is I have organized an group for my area and have already had two successful meets and working on another for the near future. If there is anyone who cares about long term and short term health of this it's me and my family of 5. Thank you again to all and please let's get back to my original question if possible lol. Link to comment Share on other sites More sharing options...
VapeEscape Posted April 25, 2014 Share Posted April 25, 2014 Ill get scolded for this but I really don't care. I use my evic to check my ohms and have been since I started dripping over 6 months ago. I've also performed several venting experiments for batteries in controlled environments. I have yet to blow myself up. The new Sony batteries can sub ohm well over 60 amps pulsing under 30 seconds. That's under 0.15 ohms. So if you have solid knowledge on vaping and battery safety, even if your device is slightly off. You will still be safe. Slam me all you want but I have tons of experience on this matter. Link to comment Share on other sites More sharing options...
Tam Posted April 25, 2014 Share Posted April 25, 2014 Slam me all you want but I have tons of experience on this matter. YOU may have tons of experience in these things but people new to vaping probably will not and will only see you saying that it's okay to check coil builds on APVs. They won't know that you need the proper batteries to sub ohm safely. That's where we'll get on you. We're trying to teach new vapers to play it safe in a way that's uniform so we don't say do this to one and don't do that to another. Mtdobies 1 Link to comment Share on other sites More sharing options...
VapeEscape Posted April 25, 2014 Share Posted April 25, 2014 Read the end of my paragraph please. I specifically state battery safety and experience is a big deal. Link to comment Share on other sites More sharing options...
SpotsyVapor Posted April 25, 2014 Author Share Posted April 25, 2014 Tam I think did read full post. She is just highlighting the safety aspect Mtdobies and Tam 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now