joejoevapekins Posted April 28, 2014 Share Posted April 28, 2014 Lmao had to Rixter and trickydick666 2 Link to comment Share on other sites More sharing options...
Joshuab3687 Posted April 28, 2014 Share Posted April 28, 2014 It will very soon have a black derlin wide bore Cloud Chaser drip tip. I can't wait to see how open that sucker is. Drip tip? I don't need no stinkin drip tip! Lol I haven't found one that is as non restrictive as what I'm after. I've taken to "stove-piping" all my RDAs. It looks silly, I'll admit, but I'm getting intense clouds without one. Link to comment Share on other sites More sharing options...
Eaglewtchr Posted April 28, 2014 Share Posted April 28, 2014 Drip tip? I don't need no stinkin drip tip! Lol I haven't found one that is as non restrictive as what I'm after. I've taken to "stove-piping" all my RDAs. It looks silly, I'll admit, but I'm getting intense clouds without one. Ok, I'm still new to the lingo. What is "stove-piping"? Link to comment Share on other sites More sharing options...
awsomr1 Posted April 28, 2014 Share Posted April 28, 2014 Red Copper Stingray LE w/Tugboat SS Panzer w/3D Rixter and Joshuab3687 2 Link to comment Share on other sites More sharing options...
Joshuab3687 Posted April 28, 2014 Share Posted April 28, 2014 Ok, I'm still new to the lingo. What is "stove-piping"? "Stove-piping" is when you draw from the hole in the top cap of your atomizer without the drip tip in. The danger in this is that some attys heat up pretty warm and/or can thrown hot juice splattering up onto the lips or tongue. Link to comment Share on other sites More sharing options...
Eaglewtchr Posted April 28, 2014 Share Posted April 28, 2014 "Stove-piping" is when you draw from the hole in the top cap of your atomizer without the drip tip in. The danger in this is that some attys heat up pretty warm and/or can thrown hot juice splattering up onto the lips or tongue. Ok. That's what I thought it might be but wanted to make sure. Thanks. Link to comment Share on other sites More sharing options...
Vispera Posted April 28, 2014 Share Posted April 28, 2014 Can never get all my kids together mvp and vv 3.0 is with wife Rixter 1 Link to comment Share on other sites More sharing options...
fishguy1123 Posted April 28, 2014 Share Posted April 28, 2014 Can never get all my kids together mvp and vv 3.0 is with wife I don't envy your future college tuition bills..... lmao trickydick666 1 Link to comment Share on other sites More sharing options...
Vispera Posted April 28, 2014 Share Posted April 28, 2014 I don't envy your future college tuition bills..... lmao Me either I have 5 real kids Link to comment Share on other sites More sharing options...
fishguy1123 Posted April 28, 2014 Share Posted April 28, 2014 Good luck my friend!!! lol Link to comment Share on other sites More sharing options...
joejoevapekins Posted April 29, 2014 Share Posted April 29, 2014 Rixter and trickydick666 2 Link to comment Share on other sites More sharing options...
Crazyavonlady Posted April 29, 2014 Share Posted April 29, 2014 Both are at .20-.22 ohms. Both have the Dinger tip. Only difference is how we do our coils and the liquid we vape Rixter, Joshuab3687 and trickydick666 3 Link to comment Share on other sites More sharing options...
Rixter Posted April 29, 2014 Share Posted April 29, 2014 At just under 4" tall (including tip) and providing outstanding vapor production, this setup goes to work with me daily. It rides perfectly in the change pocket of my Levis with enough room to spare for a 10ml bottle of juice. Bushwick 1 Link to comment Share on other sites More sharing options...
Bushwick Posted April 29, 2014 Share Posted April 29, 2014 At just under 4" tall (including tip) and providing outstanding vapor production, this setup goes to work with me daily. It rides perfectly in the change pocket of my Levis with enough room to spare for a 10ml bottle of juice. What's the resistance on your build, Rixter? I haven't used any of my 18350's in my mech cuz i am afraid it will draw too much from the battery. Link to comment Share on other sites More sharing options...
Rixter Posted April 29, 2014 Share Posted April 29, 2014 (edited) What's the resistance on your build, Rixter? I haven't used any of my 18350's in my mech cuz i am afraid it will draw too much from the battery. It's a single 6/5 spaced coil of 29g Kanthal around 3.5mm silica, and it's about 1Ω. That's roughly 17½ watts and a little over 4 amps on a freshly charged battery, and the AW IMR 18350s I use in it are rated at 6a. Edited April 29, 2014 by Rixter VIAWOL and Joshuab3687 2 Link to comment Share on other sites More sharing options...
3Rutez Posted April 30, 2014 Share Posted April 30, 2014 My best 2 mods/setups. My ALL-TIME favorite. This combo is INSANE. My holy grail, lol. Link to comment Share on other sites More sharing options...
VIAWOL Posted April 30, 2014 Share Posted April 30, 2014 It's a single 6/5 spaced coil of 29g Kanthal around 3.5mm silica, and it's about 1Ω. That's roughly 17½ watts and a little over 4 amps on a freshly charged battery, and the AW IMR 18350s I use in it are rated at 6a. I really like this set up I may have to pick up a 350 and give this a try. I too was curious what the small battery could handle. I won't be able to use a parallel coil that's for sure. That has been my favorite set up for a while now. Link to comment Share on other sites More sharing options...
Bushwick Posted April 30, 2014 Share Posted April 30, 2014 It's a single 6/5 spaced coil of 29g Kanthal around 3.5mm silica, and it's about 1Ω. That's roughly 17½ watts and a little over 4 amps on a freshly charged battery, and the AW IMR 18350s I use in it are rated at 6a. Ehh, I will stick to my 18650's to make sure I keep things safe. Link to comment Share on other sites More sharing options...
Joshuab3687 Posted April 30, 2014 Share Posted April 30, 2014 Ehh, I will stick to my 18650's to make sure I keep things safe. His setup at a higher ohm keeps him safe and stealthy. Those batts aren't for serious cloud chasing, but thats not what he's after with that setup. He's looking at easy portability, stylishness, and decent flavor/vapor combo while scratching that nic itch.Looks great like that Rixter! trickydick666 1 Link to comment Share on other sites More sharing options...
Bushwick Posted April 30, 2014 Share Posted April 30, 2014 His setup at a higher ohm keeps him safe and stealthy. Those batts aren't for serious cloud chasing, but thats not what he's after with that setup. He's looking at easy portability, stylishness, and decent flavor/vapor combo while scratching that nic itch. Looks great like that Rixter! I get that, but I don't know the amp rating on my 18350s for sure. I could build a 1 - 1.5 ohm coil, and I might, but for now I will stick to trying to build down to .2 and using my vtc 4 Link to comment Share on other sites More sharing options...
Joshuab3687 Posted April 30, 2014 Share Posted April 30, 2014 What brand and mah rating is your 18350? I'll see if I can find it, but I think they are mostly 6a. Some may be 10a Link to comment Share on other sites More sharing options...
joejoevapekins Posted April 30, 2014 Share Posted April 30, 2014 Think those purple efest are 10a Link to comment Share on other sites More sharing options...
Bushwick Posted April 30, 2014 Share Posted April 30, 2014 What brand and mah rating is your 18350? I'll see if I can find it, but I think they are mostly 6a. Some may be 10a EH 800mah? http://www.madvapes.com/imr-18350-limn-800mah-battery.html Link to comment Share on other sites More sharing options...
joejoevapekins Posted April 30, 2014 Share Posted April 30, 2014 Those have a 8c rating which is 6.4amps Link to comment Share on other sites More sharing options...
Joshuab3687 Posted April 30, 2014 Share Posted April 30, 2014 EH 800mah? http://www.madvapes.com/imr-18350-limn-800mah-battery.html They are claimed at 8amp, but I did a little digging and some testing shows 6.4amp max. So, if you stay above 1 ohm at a 4amp draw, you're good with that battery.Dammit, Joe beat me to it! Lol Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now