bloombloom88 Posted April 7, 2014 Share Posted April 7, 2014 So I've wrapped a few coils now for my kpt but I'm having an issue..First off, they are 2.2 - 2.3 ohm coils with a 5/6 wrap if I'm not mistaken with 32g wire using a 5/64 drill bit.Vapor and flavor is 10x better but here's my issue. After it sits for 15-20 mins without vaping, my next hits are really burnt. Almost like the cotton is dry. It eventually goes away but damn it sure is getting in my nerves..Battery is at 7.5-8.0 watts and I did my best to get the coils as close to each other but they are still spaced, I've only built 4 soo far. All are having this dry hit issue. Am I doing something wrong? If more info is needed ask away and I'll try to help as much as I can, thanks! Link to comment Share on other sites More sharing options...
Joshuab3687 Posted April 7, 2014 Share Posted April 7, 2014 You may need to take a couple primer puffs before you hit the button again. This may be caused by too much cotton and not allowing the juice to wick as quick as you'd like. Hope this helped! Link to comment Share on other sites More sharing options...
bloombloom88 Posted April 7, 2014 Author Share Posted April 7, 2014 I'll give this a shot. Am using about the same amount of cotton as the wick, am I suppose to use less? Link to comment Share on other sites More sharing options...
Compenstine Posted April 7, 2014 Share Posted April 7, 2014 Your cotton may be rolled to tight. Rewick it and don't roll it tight, do a very loose roll. I use cotton in my rebuilds and do not get any dry hits. Joshuab3687 1 Link to comment Share on other sites More sharing options...
Joshuab3687 Posted April 7, 2014 Share Posted April 7, 2014 It takes a little bit of trial and error to get it just right. Too much and/or too tight inside the coil can lead to dry hits. Too little and/or too loose, it'll get flooded and leak out onto your battery contact. You want it to be a little snug, but able to pull it back and forth. I know thats not a great answer, but its hard to quantify without being there to show you, hands on. Compenstine 1 Link to comment Share on other sites More sharing options...
Compenstine Posted April 7, 2014 Share Posted April 7, 2014 You know Josh I have been kicking around the Idea of doing one on one over Skype for coil building and DIY Juice making lessons. I think the videos are great that help people build coils and do DIY but to have someone sit down with you and be there to shoot questions at could be nice for some people. bloombloom88 and Joshuab3687 2 Link to comment Share on other sites More sharing options...
bloombloom88 Posted April 7, 2014 Author Share Posted April 7, 2014 You know Josh I have been kicking around the Idea of doing one on one over Skype for coil building and DIY Juice making lessons. I think the videos are great that help people build coils and do DIY but to have someone sit down with you and be there to shoot questions at could be nice for some people.this is a GREAT idea! Compenstine 1 Link to comment Share on other sites More sharing options...
Joshuab3687 Posted April 7, 2014 Share Posted April 7, 2014 Thats a great idea Comp! Compenstine 1 Link to comment Share on other sites More sharing options...
Compenstine Posted April 7, 2014 Share Posted April 7, 2014 I have a couple people that are going to help me with it and see how it goes. If things go well, once I work out the bugs and things are smoothed out, it won't be be to far down the road. Joshuab3687 1 Link to comment Share on other sites More sharing options...
Joshuab3687 Posted April 7, 2014 Share Posted April 7, 2014 You're like a medieval blacksmith! Always got lots of irons in the fire! Lol Link to comment Share on other sites More sharing options...
Compenstine Posted April 7, 2014 Share Posted April 7, 2014 I like keeping busy and thinking outside the box. Sometimes I take on too much, but ehh that is just part of the territory. LOL Link to comment Share on other sites More sharing options...
Crazyavonlady Posted April 7, 2014 Share Posted April 7, 2014 Also a google hangout would be good too-- you can have like 10 people on there. But everyone has to have google plus, which is they have a gmail email address isn't too hard to do. We use hangouts all the time now for md vapers (group on Facebook) just to chat! And show off Link to comment Share on other sites More sharing options...
Compenstine Posted April 7, 2014 Share Posted April 7, 2014 You can do that with Skype too. Link to comment Share on other sites More sharing options...
Crazyavonlady Posted April 7, 2014 Share Posted April 7, 2014 I don't know much about Skype.... While I am a social media junkie (I spent two years working with a website/Facebook page) I don't do much when it comes to the video chat things. It took me forever to get hangouts set up. Link to comment Share on other sites More sharing options...
Vispera Posted April 7, 2014 Share Posted April 7, 2014 You know Josh I have been kicking around the Idea of doing one on one over Skype for coil building and DIY Juice making lessons. I think the videos are great that help people build coils and do DIY but to have someone sit down with you and be there to shoot questions at could be nice for some people. I would so do this Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now