jgjam Posted April 1, 2014 Share Posted April 1, 2014 I'm having a problem with my Nautilus and I wasn't sure where to ask. So the problem I'm having is that the bottom part (the one with the airhole ring) seems to be getting flooded, sometimes I see fluid leaking out of the airholes I'm using. A couple times when trying to vape I saw it shoot out like a guiser! I tried switching from the smallest airhole to the largest and that didn't work, though I generally vape on the largest. It seems the problem is a bit more apparent with the smaller one though. I'm doing long and slow vapes so I don't think I'm causing the problem. I'm also not overfilling the tank since I generally fill it halfway so I know none of it gets in the middle hole. Finally all the parts are tight when I screw it on, including the atty. I'm using the itaste MVP mod as the body VV is at 8.0 and VW is at 3.7. So can anyone help me figure out why it's constantly gurgling, shooting up like a guiser, and flooding the bottom part? Thanks! Link to comment Share on other sites More sharing options...
Aquatroy Posted April 1, 2014 Share Posted April 1, 2014 Sounds like a bad coil assembly, or really thin juice..what's the ratio? Link to comment Share on other sites More sharing options...
jgjam Posted April 1, 2014 Author Share Posted April 1, 2014 Sounds like a bad coil assembly, or really thin juice..what's the ratio? Ratio? If that's the ohm's, it's 1.6 for the one that's in it, and 1.8 for the one in the box. I'm a tad bit new to vaping, so don't mind me if I get the terminology a bit mixed up. The juice I'm using is from awesomevapor. Link to comment Share on other sites More sharing options...
Aquatroy Posted April 1, 2014 Share Posted April 1, 2014 Pg/Vg ratio of the juice.....no worries, gotta learn somewhere. I have also seen issues like your having with altitude and heat, but don't think your having those, try changing the coil first... Link to comment Share on other sites More sharing options...
fishguy1123 Posted April 1, 2014 Share Posted April 1, 2014 The ratio he was asking about if for the juice you're useing. PG/VG ratio. Some don't tell you, but should. The Ohms has to do with the coil head you have for your tank. Also, just so you know, for a VV/VW device you can set the voltage setting (VV) or the wattage setting (VW). In your post it looks like you have it reversed. No biggie, but may help you as you learn. Wish I could help more with the leaking issue but I don't own one. Good luck. Link to comment Share on other sites More sharing options...
jgjam Posted April 1, 2014 Author Share Posted April 1, 2014 I'll try switiching the coil and see what happens from there. Link to comment Share on other sites More sharing options...
1cheater Posted April 3, 2014 Share Posted April 3, 2014 (edited) it sounds to me like you fried the coil, a 1.6 ohm coil will get burnt at 8 watts?. Or close to that depending on juice. There is a vaping chart at the top of this sub-forum that gives you an idea what to set your voltage/watts at Edited April 3, 2014 by 1cheater Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now