samp1590 Posted March 27, 2014 Share Posted March 27, 2014 Hi, I have an itaste VV V.3 and a Kanger mini protank 2. I've got a 1.8ohm coil in my tank at the moment and it vapes like a champ but i cant help finding myself wanting more, is it possible to sub-ohm on an Itaste vv or would i need a mod for that? Oh and another quick question i want to put a rotatable drip tip on my mini protank, just to be different. Will a standard rotatable drip tip fit my tank or are they meant for the likes of the vivi nova and the iclear 30s instead? (I'm fairly new to the vaping scene) Link to comment Share on other sites More sharing options...
Joshuab3687 Posted March 27, 2014 Share Posted March 27, 2014 Your APV won't sub ohm. There's a learning curve to building coils and a BIG learning curve to sub ohming. If you're new to vaping, I recommend sticking to what you have for a little while, while you do some research into mods, battery safety, coil building, rda's, and rba's. There's a plethora of info here. Just read thru all the pinned threads on the "Hardware Specific" sub forums, and then read thru some of the other threads. joejoevapekins 1 Link to comment Share on other sites More sharing options...
fishguy1123 Posted March 27, 2014 Share Posted March 27, 2014 That's just not an option for us vv v3 users... Probly only fire down to about 1.3-1.5 ohm coils. Also, if you're thinking of useing the pro tank or something similar sub ohms would burn the silicone cap I believe. Gonna need a mech mod or a higher end vv/vw device and a rebuildable top, along with alot of knowledge and the proper equipment to test coils. Joshuab3687 1 Link to comment Share on other sites More sharing options...
Compenstine Posted March 27, 2014 Share Posted March 27, 2014 It would affect the rubber insulator. I have put a .6 in a Kanger head with little issue, but that's after months of building coils and knowing the issues that can occur. If you are not spot on before you install it, you will get a hot leg and the taste of brunt rubber is nothing you want in your mouth. Also it could burn through te insulator and cause a hard short damaging your device. It is also something you don't want to chain vape because it will get Hot! As Fishguy said, I did this for a mech not a VV/VW device. Link to comment Share on other sites More sharing options...
Vispera Posted March 28, 2014 Share Posted March 28, 2014 Thanks for the fast reply. My other question is if the electronic cig actually tases like a real smoke. I went to Puresmoker and I noticed they have a lot of juice flavors which is neat but I would rather mine taste like the real thing. Been there done that I think I found 1.1 or above best with kpt heads Link to comment Share on other sites More sharing options...
Patricia Posted March 29, 2014 Share Posted March 29, 2014 I don't know very much about most of your questions but I can tell you I use the rotating drip tips on my KPT 2. They have a very nice selection at FastTech. Link to comment Share on other sites More sharing options...
Patricia Posted March 29, 2014 Share Posted March 29, 2014 I do have the full sized KPT 2 though. I do not know if you can use those drip tips on the mini. Link to comment Share on other sites More sharing options...
Joshuab3687 Posted March 29, 2014 Share Posted March 29, 2014 Yep, they'll fit Link to comment Share on other sites More sharing options...
samp1590 Posted April 1, 2014 Author Share Posted April 1, 2014 I swapped my KPT mini for the full sized KPT and have the rotatable drip tip. Thanks anyways guys. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now