bloombloom88 Posted March 27, 2014 Posted March 27, 2014 After doing a little reading about rebuilding coils, this sounds like something I want to try but don't understand a few things.First off here's what I have.Kanger tech mini pro tank 2Itaste vv I've ran 2.0 ohm coils at 3.3-3.5 volts and seem to like the results, although I haven't adjusted it much.I'm wanting to rebuild with a 2.0 ohm coil and be able to run the same voltage I have been. I've also read that using cotton gives you more flavor and vapor? End results I'm looking for lots of flavor and vapor, not soo much with harsh throat hits. My juice is a 50/50 mixAs for the wire goes, what gauge do I need go achieve 2.0 ohms?What's the difference between a micro and nano coil? And which one comes with my tank?Why do I need a torch to burn the wire with once wrapped on the needle?If there are any other basics I need to know before I try this, please let me know.
Joshuab3687 Posted March 27, 2014 Posted March 27, 2014 (edited) Youtube Riptrippers. He's done a vid on kanger coils. Edited March 27, 2014 by Joshuab3687
iheartvape Posted March 27, 2014 Posted March 27, 2014 You can use any Guage wire to achieve a 2.0 coil, what will influence the ohms is how many wraps you do with your choice of wire. If your going to try and build one for a kpt mini I would recommend 28g or maybe 30g. The reason you torch the wire after its wrapped is to help keep it together. Torching takes the springiness out and stiffens the wire so it keeps it's shape better.The differences between macro, micro, nanotechnology and super nano is size or diameter of the coil. macro being largest, then micro, then nano, and super nano being the smallest. As far as actual dimension for each, i dont know the exact measurements.I recommend using cotton it seems to give me the best flavor. Ekowool gives good flavor as well but is a little harder to find. Hemp supposedly is the best for flavor, but I personally haven't tried it so I can't vouch for it or not.Hope this helps in some way.
Compenstine Posted March 27, 2014 Posted March 27, 2014 The only thing I would change in that is the wire size, 28ga will not work well in a KPT head because of the number of wraps it would take to achieve a 2.2 coil. The 28ga would require at least 10 wraps and it would then be to big for the opening. Using 30-32 would be best for starting out. Also before you even start make sure you have a multimeter to test ohms. Do not even consider sub ohm until you have been building coils for a few months and reading up on battery safety, this is a requirement not a suggestion. Crazyavonlady, Tam and bloombloom88 3
fishguy1123 Posted March 27, 2014 Posted March 27, 2014 Can you guys explaind the 7/6 or 8/7 etc... terminology? I get the number of wraps, but not sure what ppl meen when they use that ratio. Thanks
Joshuab3687 Posted March 27, 2014 Posted March 27, 2014 Can you guys explaind the 7/6 or 8/7 etc... terminology? I get the number of wraps, but not sure what ppl meen when they use that ratio. Thanks When you wrap a coil, there will be 1 more wrap on one side vs the other. If you wrap a coil, abd both leads are pointing down, there will be more wraps on top than if you had the leads pointing up. Make sense? Hope it helped
fishguy1123 Posted March 27, 2014 Posted March 27, 2014 (edited) I think so... lol In my head I pictured it as the difference between haveing both lead pointing in the same direction or 1 up and 1 down. Thanks And no, I'm not trying it yet... lol Edited March 27, 2014 by fishguy1123
fishguy1123 Posted March 27, 2014 Posted March 27, 2014 So, when someone say it's a 6 wrap on .... size bit or whatever, are they refering to the (most) number of wraps? Both leads faceing same direction and count the wraps on the oposite side as the leads are faceing?
Joshuab3687 Posted March 27, 2014 Posted March 27, 2014 So, when someone say it's a 6 wrap on .... size bit or whatever, are they refering to the (most) number of wraps? Both leads faceing same direction and count the wraps on the oposite side as the leads are faceing? Yes and no. Lol! I try to just list the bigger number. It's too confusing to always be saying, 6/5 or 12/11, and also because I sometimes do builds where the leads are opposing for certain devices. So, in closing, just take the larger number. When you do start building, get an ohms meter and a few different size rods or drill bits and just experiment with numbers of wraps on varying size rod and check em. You'll get the gist of just how much or little an extra wrap will change the ohms. Tam 1
Joshuab3687 Posted March 27, 2014 Posted March 27, 2014 Can we move this thread to hardware specific?
fishguy1123 Posted March 27, 2014 Posted March 27, 2014 Yeah, ohm reader is a MUST. I'm a lil ways off from building coils right now, but wat to gain the info before I try. I get that it's still a lil tricky and take some time to get it down though. Just want to get started with the best info I can when I do. Thanks for the tips!
Joshuab3687 Posted March 27, 2014 Posted March 27, 2014 Yeah, ohm reader is a MUST. I'm a lil ways off from building coils right now, but wat to gain the info before I try. I get that it's still a lil tricky and take some time to get it down though. Just want to get started with the best info I can when I do. Thanks for the tips! Fishguy, you are going about it the right way! I appreciate your search for knowledge before jumping into things. There are far too many people who want to put the cart before the horse. When your ready, we'll be here to help!
fishguy1123 Posted March 27, 2014 Posted March 27, 2014 I'm getting there... Everyone here has been a great help. I'll bend your ear when the time comes for sure!
bloombloom88 Posted March 27, 2014 Author Posted March 27, 2014 I'm getting there... Everyone here has been a great help. I'll bend your ear when the time comes for sure! I 2nd this. Tons of info thanks for all of the replies guys!
fishguy1123 Posted March 27, 2014 Posted March 27, 2014 Rumor has it that for a good bottle of scotch Josh will come to your house and give a hands on tutorial on coil building!
Joshuab3687 Posted March 27, 2014 Posted March 27, 2014 Rumor has it that for a good bottle of scotch Josh will come to your house and give a hands on tutorial on coil building! Lmao! Glenlivet or Glenfiddich! And as a Trucker, I do travel! Lmao!
Joshuab3687 Posted March 28, 2014 Posted March 28, 2014 PM you for details right!? LMAO Absolutely! Lol
Tam Posted March 28, 2014 Posted March 28, 2014 Lmao! Glenlivet or Glenfiddich! And as a Trucker, I do travel! Lmao! Well, why didn't you say so? When I was having all that trouble with the butane I would've bought you a whole case if you wanted. Joshuab3687 1
Joshuab3687 Posted March 28, 2014 Posted March 28, 2014 Well, why didn't you say so? When I was having all that trouble with the butane I would've bought you a whole case if you wanted. Yeah, but you forget, I can't come out to CO till chain law season's over. Lol! Wish I could've came out to help ya though.
Tam Posted March 28, 2014 Posted March 28, 2014 Yeah, but you forget, I can't come out to CO till chain law season's over. Lol! Wish I could've came out to help ya though. Just teasing you, Josh, but I will be happy to buy you a drink (even a double), when you get out this way later this summer. Joshuab3687 1
Joshuab3687 Posted March 28, 2014 Posted March 28, 2014 Just teasing you, Josh, but I will be happy to buy you a drink (even a double), when you get out this way later this summer. Thanks! But we better just keep it a single, I'd like to have enough wits about me to process the words that come outta peoples mouths. Lol!
Tam Posted March 28, 2014 Posted March 28, 2014 Thanks! But we better just keep it a single, I'd like to have enough wits about me to process the words that come outta peoples mouths. Lol! If you're talking to me you might want to reconsider the double. Ask Troy.
Joshuab3687 Posted March 28, 2014 Posted March 28, 2014 If you're talking to me you might want to reconsider the double. Ask Troy. It's Troy I wanna be able to comprehend. I may have to come back with a snappy retort if he starts ribbin me. Lol Tam 1
bloombloom88 Posted April 4, 2014 Author Posted April 4, 2014 I'm going to pick up a coil and mini torch after work today and attempt to make my first coil tonight.Has anybody made a 2ish ohm coil for the kpt? I need to know how many wraps to make.Also, if this could be answered one more time is appreciate it.. The higher ohm the less resistance and less power it needs correct?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now