knsr3 Posted March 26, 2014 Share Posted March 26, 2014 Ive been vaping the mini protank 2 for a couple weeks now, and decided to clean it, put it all back together with a new 2.2 coil it seems that my wick will not stay wet I hav to prime it constantly by covering the air holes and doing a non powered pull, I do chain vape quite a bit so my question is did I get something to tight I didnt have any problems when I first got the tank. I tried removing the flavor wicks switched out the white cup seal on the coil with the old one as well. Also what is a good tank for chain vaping? Link to comment Share on other sites More sharing options...
Aquatroy Posted March 26, 2014 Share Posted March 26, 2014 Whats the ratio of your juice? Link to comment Share on other sites More sharing options...
knsr3 Posted March 26, 2014 Author Share Posted March 26, 2014 Forgot to add same juice as well Link to comment Share on other sites More sharing options...
knsr3 Posted March 26, 2014 Author Share Posted March 26, 2014 It is a 50/50 juice Link to comment Share on other sites More sharing options...
Dasfriek Posted March 26, 2014 Share Posted March 26, 2014 I chain vape the Aspire Nautilus and the Aerotank. Neither require priming for me, but I run 8-10 watts on these dual coil tanks with a 70/30 pg/vg juice. I prefer to also mod both tanks for more airflow. Chain vaping like this uses a lot of juice also, id bet I go thru 5-8ml's a day easily. Also 2 battery swaps in my mod is needed. The Aero has a warmer vape when it's setup to my liking, while the Nautilus has crisper flavors. I still use a PT2 mini on the go,but I do drill the airholes out. You could try flipping the coils silicone cap on the chimney and that may help. Link to comment Share on other sites More sharing options...
knsr3 Posted March 26, 2014 Author Share Posted March 26, 2014 Thanks haven't flipped the cap yet, will this cause flooding issues? Link to comment Share on other sites More sharing options...
Dasfriek Posted March 26, 2014 Share Posted March 26, 2014 It worked on the single coil heads fine, but will flood a dual coil head when I tried it. Make sure you have the top flavor wick in place as it will flood without without one when the silicone cap is flipped. Link to comment Share on other sites More sharing options...
bloombloom88 Posted March 26, 2014 Share Posted March 26, 2014 It worked on the single coil heads fine, but will flood a dual coil head when I tried it. Make sure you have the top flavor wick in place as it will flood without without one when the silicone cap is flipped. What is a top flavor wick? And what does reversing the cup do? Link to comment Share on other sites More sharing options...
Dasfriek Posted March 26, 2014 Share Posted March 26, 2014 What is a top flavor wick? : It sits on the actual coil under the post and lets juice get on the outer part of the coil while the main wick is center. And what does reversing the cup do? It puts less tension on the wick and in theory allows juice to flow more easily. Link to comment Share on other sites More sharing options...
knsr3 Posted March 27, 2014 Author Share Posted March 27, 2014 Thanks for the responses I will try this when I wake up Link to comment Share on other sites More sharing options...
knsr3 Posted March 30, 2014 Author Share Posted March 30, 2014 Tried it and man does this thing fly through the juice never a dry hit lots of vape appreciate your help Link to comment Share on other sites More sharing options...
bloombloom88 Posted April 4, 2014 Share Posted April 4, 2014 I'll be trying this tonight as well, I'm also going to be rebuilding a few coils for my kpt for the first time Link to comment Share on other sites More sharing options...
knsr3 Posted April 6, 2014 Author Share Posted April 6, 2014 Thought of rebuilding my coils but as cheap as they are just to quick and easy to pop a new one in I've gotten 3 weeks on my current coil on my mini protank 2, I clean it weekly vapes brandnew vmshaw 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now