Tw1sted Posted March 12, 2014 Posted March 12, 2014 (edited) Hey guys and gals, I've been looking at the QCoiler for a while now and after reading some posts in the new product section about people who had pre-ordered it getting their money refunded I was in search of a new "coiler" device to assist with wrapping coils. Check out what I found. http://ozcrafts.com.au/The-Deluxe-Coiling-Gizmo-P2348642.aspx That little guy, called the 'Deluxe Coiling Gizmo' is meant for jewelry and bead making I guess, but it's perfect for coils according to some vapers that have used it. Check out the video below for a great example. I've also been told that it's being sold at Michaels Arts & Craft stores for $10.99, I found it on Amazon for $9-something, and it's available with free shipping for prime members. After seeing this I really can't think of any reason that people with even the most novice mechanical skills couldn't rebuild and make their own coils for pennies to the dollar in terms of purchasing premade wicks. Except of course if you don't have any way to check your resistance! In that case, JUST DON'T DO IT. It's not safe. Edited March 12, 2014 by Tw1sted
wvducklady Posted March 12, 2014 Posted March 12, 2014 Nice! That is an awesome idea! Thanks for that! When I start building my own coils I will get one of those, but I first need to get the device to check my resistance!! Thank you! I loved that!
Compenstine Posted March 12, 2014 Posted March 12, 2014 I have seen these, very simple design that works. Thanks for posting this Tw1sted. You can get Econo version here for $7.99
Love2VapeDaily Posted March 12, 2014 Posted March 12, 2014 I punched a small hole in a capri sun straw. Stick the wire through anf wrap it. Makes tight and neat coils.
Tw1sted Posted March 12, 2014 Author Posted March 12, 2014 I have seen these, very simple design that works. Thanks for posting this Tw1sted. You can get them here for $7.99 Thanks Comp! That's the 'econo' version which comes with two different size rods, apparently the deluxe version comes with a total of 5 for some more variety of coil sizes. Compenstine 1
Vispera Posted March 12, 2014 Posted March 12, 2014 Its what I use 22g nano with no torch it comes out nice and clean RobChase 1
Tw1sted Posted March 12, 2014 Author Posted March 12, 2014 So it is LOL Link to Deluxe Version @ $10.99 http://www.amazon.com/Artistic-Wire-Coiling-Deluxe-Jewelry/dp/B0068RQ85K/ref=sr_1_1?ie=UTF8&qid=1394652115&sr=8-1&keywords=deluxe+coiling+gizmo - Here's the link for the Amazon item $9.32 with free shipping for prime members. Or get one of those 40% off coupons and pick it up at Michaels for $6! wvducklady 1
BestVapes Posted March 14, 2014 Posted March 14, 2014 I have seen these, very simple design that works. Thanks for posting this Tw1sted. You can get Econo version here for $7.99 or go get a pair of plyers, a guitar string and wrap your kanthal around the guitar string for optimal coil tightness and consistancy guitardoc64 1
Compenstine Posted March 14, 2014 Posted March 14, 2014 or go get a pair of plyers, a guitar string and wrap your kanthal around the guitar string for optimal coil tightness and consistancy Thats ok, I have my own setup for wrapping coils that works for me. hookahhighness 1
BestVapes Posted March 14, 2014 Posted March 14, 2014 Thats ok, I have my own setup for wrapping coils that works for me. Hahaha that's perfect. Is that a pen?!
Compenstine Posted March 14, 2014 Posted March 14, 2014 Nope I have a variety of blunt needles and one other sharp (I blunted it) not in the photo. it is about the size of the guitar string.
wvducklady Posted March 16, 2014 Posted March 16, 2014 That is a neat contraption you have there Compenstine!
Tom74 Posted March 16, 2014 Posted March 16, 2014 So does anyone know where to pick up a good quality ohms checking device for 510 ego connections?
BigClouds1021 Posted March 16, 2014 Posted March 16, 2014 Thats ok, I have my own setup for wrapping coils that works for me. That's a sweet setup. All I use is a small diameter nail to wrap around, wire snips and a pair of needle nose pliers. I have to make me something like that.
BigClouds1021 Posted March 16, 2014 Posted March 16, 2014 So does anyone know where to pick up a good quality ohms checking device for 510 ego connections? You can go to any hardware store, just about, and get u a good multimeter. It's what I use. Tom74 1
Compenstine Posted March 16, 2014 Posted March 16, 2014 That is a neat contraption you have there Compenstine! Thanks I like it. That's a sweet setup. All I use is a small diameter nail to wrap around, wire snips and a pair of needle nose pliers. I have to make me something like that. I picked it up at Radio Shack a few years ago. They still carry them as far as I know. It is hands free soldiering hobby stand. I just took off the magnifing glass because it was in the way. Cost around $16.00
Tom74 Posted March 20, 2014 Posted March 20, 2014 So if im using 32 gauge Kanthal and 3.5 mm silica wick, on average how many coil wraps would make a 2 - 2.2 ohm coil? I got a tester but instead of going through the whole trial and error thing I was just wondering if someone already knew.
Tom74 Posted March 20, 2014 Posted March 20, 2014 So if im using 32 gauge Kanthal and 3.5 mm silica wick, on average how many coil wraps would make a 2 - 2.2 ohm coil? I got a tester but instead of going through the whole trial and error thing I was just wondering if someone already knew. .... For a KPT.
Compenstine Posted March 20, 2014 Posted March 20, 2014 If I'm not mistaken 5 wraps should do the trick. Remember that the KPT head is small. Make sure what ever you wrap it on will just fit down in the groves where the flavor wick fits. Leave the coil on the what you wrapped on so it stays lined up with the groves. This will also insure that it is seated properly to wick it after you have installed the coil. Tom74 1
Tom74 Posted March 21, 2014 Posted March 21, 2014 If I'm not mistaken 5 wraps should do the trick. Remember that the KPT head is small. Make sure what ever you wrap it on will just fit down in the groves where the flavor wick fits. Leave the coil on the what you wrapped on so it stays lined up with the groves. This will also insure that it is seated properly to wick it after you have installed the coil. Thanks, Ill be referring to Rixter's picture tutorial on how to do it as soon as I get my Kanthal and wick in the mail... Compenstine 1
Tom74 Posted March 21, 2014 Posted March 21, 2014 Also getting an Ithaka dual coil RBA to throw on my itaste 134... Im excited
Happy Vapor Posted March 21, 2014 Posted March 21, 2014 Be careful with the ithaka. If you are hurt starting to wrap coils know that you have to have resistance and non resistance wire and a wire joiner if you want to do it correctly. This is what turned me off of the ithaka and the prometheus. I like to keep things simple
Tom74 Posted March 21, 2014 Posted March 21, 2014 Be careful with the ithaka. If you are hurt starting to wrap coils know that you have to have resistance and non resistance wire and a wire joiner if you want to do it correctly. This is what turned me off of the ithaka and the prometheus. I like to keep things simple I checked out a video on youtube on building dual coils for an ithaka GG. Seemed pretty straight forward.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now