regal Posted April 25, 2014 Share Posted April 25, 2014 (edited) The thing I don't get is same brand (different flavor) both 50/50 and one is so much easier to pull a drag. I guess the difference is the atomizer (one davide anyvape other innovate clear.) I prefer an easy drag or pull with a lot of vapor would that be more PG? Also I just tried a 100% VG version of Vaporites VR4 to compare to their 50/50, the 50/50 is much easier to atomize/vapor, tastest better too. Edited April 25, 2014 by regal Mtdobies 1 Link to comment Share on other sites More sharing options...
Vispera Posted April 25, 2014 Share Posted April 25, 2014 The thing I don't get is same brand (different flavor) both 50/50 and one is so much easier to pull a drag. I guess the difference is the atomizer (one davide anyvape other innovate clear.) I prefer an easy drag or pull with a lot of vapor would that be more PG? Also I just tried a 100% VG version of Vaporites VR4 to compare to their 50/50, the 50/50 is much easier to atomize/vapor, tastest better too. Yes 50/50 will be better in a clearo or a bottom feed it wicks better as it is less thick also more pg will give more flavor as for the draw that all depends on you device is you want a looser draw try a aerotank or a nautilus with adjustable airflow Link to comment Share on other sites More sharing options...
Bebop Posted April 25, 2014 Share Posted April 25, 2014 Does no one see the contradiction. First two posts are saying the opposite of the last. Which is it? There is something you don't understand. These statements do not contradict one another.. Vispera and Joshuab3687 2 Link to comment Share on other sites More sharing options...
fishguy1123 Posted April 25, 2014 Share Posted April 25, 2014 The thing I don't get is same brand (different flavor) both 50/50 and one is so much easier to pull a drag. I guess the difference is the atomizer (one davide anyvape other innovate clear.) I prefer an easy drag or pull with a lot of vapor would that be more PG? Also I just tried a 100% VG version of Vaporites VR4 to compare to their 50/50, the 50/50 is much easier to atomize/vapor, tastest better too. The only way to compare things is if you only have one variable. Different tanks can cause different results. In the end, you will have to decide what you like the best. Link to comment Share on other sites More sharing options...
Mefisto Posted April 29, 2014 Share Posted April 29, 2014 VG = clouds man. . . clouds. Happy Vapor 1 Link to comment Share on other sites More sharing options...
Happy Vapor Posted April 29, 2014 Share Posted April 29, 2014 As far as OP is concerned... The benefit of high VG is, as you can tell, subjective! If you're using Rebuildable Dripping Atomizers (RDAs), then high VG juices are preferable for exhaling large amounts of vapor! If flavor is where you're headed, then go with a higher PG ratio. The PG carries the flavor and throat hit, whereas the VG carries the vapor and sweetness. If you are using standard Kanger coils (i.e. stock,not rebuilt), they don't like to wick high VG juices as fast as 50/50 or higher PG, you may wind up with dry hits. I hope this helps unless you remove the rubber grommet from the coil head. That's the only way I was able to make it wick like it's supposed to. I like taking my evod tank with my mvp 2 and blowing huge clouds at the local vape shop. Blows people's mind. Link to comment Share on other sites More sharing options...
Rcam1977 Posted April 30, 2014 Share Posted April 30, 2014 I've actually got some cherrylimade from my local B&M that is 40/60 and keep getting dry hits in my KPT2, I took the little rubber grommet on the chimney off and have been good since Link to comment Share on other sites More sharing options...
regal Posted April 30, 2014 Share Posted April 30, 2014 I think the new dual coil aspire's handle high VG better than the older single coil, they are harder to find and its easy to order the wrong one. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now