terrapindance Posted March 3, 2014 Posted March 3, 2014 so i have been vaping for about 8 months now -- my current, and essentially only set up since i started, is a joyetech evic with a kanger protank 3. it works fine, can't really complain. had i been more careful with the evic it would be in better condition, but it still works fine. just a little crack on the screen and some minor issues with the turn-wheel. BUT ANYWAY.. i really want something that is CONVENIENT and will give the best taste for my juices, as i am rather picky about my juice. a buddy of mine offered to sell me his smoktech magneto for $30 but i'm also looking into a nemesis clonse(any reviews/experiences are appreciated). as for an RBA, i'm really interested in either a kayfun 3.1 or an ithaka. my next question would be, would either of these tanks work well with my evic, or would you recommend pairing it with a mech mod? i have an omega dripper tank but can only build the coils to 1.2 ohms or higher, so in plain terms, it sucks on my evic -- taste and vapor production is minimal. responses and recommendations are SUPER appreciated. also, if anyone is selling anything that would fit my needs, feel free to message back. thanks a ton terrapin
terrapindance Posted March 3, 2014 Author Posted March 3, 2014 or should i just go with the aspire nautilus and scratch a new mod and RBA entirely? seems like there have been a lot of good reviews.
yeroc1982 Posted March 4, 2014 Posted March 4, 2014 Kayfun 3.1 is awesome, I don't use anything else now.
terrapindance Posted March 4, 2014 Author Posted March 4, 2014 Kayfun 3.1 is awesome, I don't use anything else now. will it work well with my evic? or will it work better with a mech mod. i have an omega dripper but i can only build the coils to 1.2 ohms or higher so it hits very poorly.
Vispera Posted March 4, 2014 Posted March 4, 2014 will it work well with my evic? or will it work better with a mech mod. i have an omega dripper but i can only build the coils to 1.2 ohms or higher so it hits very poorly. I have my kayfun with a 1.3 micro coil and works awsome on my vamo evic should be the same but note kayfuns are for flavor not clouds
Joshuab3687 Posted March 4, 2014 Posted March 4, 2014 If you are wanting to sub ohm, then you'll need to get a mech mod, batteries for it, and a charger for your batts. terrapindance 1
terrapindance Posted March 4, 2014 Author Posted March 4, 2014 If you are wanting to sub ohm, then you'll need to get a mech mod, batteries for it, and a charger for your batts. definitely wanting to go sub ohm. what would you recommend in the way of mech mods? i'm looking into a nemesis or chi you clone. any experience with either? or any other recs you could give before i buy? i'm leaning towards the nem.
Mrwaylon Posted March 4, 2014 Posted March 4, 2014 The first thing you need to do is some research. You gotta be safe have you ever built coils before?.
terrapindance Posted March 4, 2014 Author Posted March 4, 2014 The first thing you need to do is some research. You gotta be safe have you ever built coils before?. i have built coils for my omega, yes. but i am not incredibly experienced. i have a local shop that helps me learn a lot of these things and actually holds classes on building coils.
Mrwaylon Posted March 4, 2014 Posted March 4, 2014 i have built coils for my omega, yes. but i am not incredibly experienced. i have a local shop that helps me learn a lot of these things and actually holds classes on building coils. Better be safe then sorry. Do some research and watch videos before you jump into sub ohm. It can be dangerous. If you don't know about ohms.batteries and such. Just do some research first.
terrapindance Posted March 4, 2014 Author Posted March 4, 2014 Better be safe then sorry. Do some research and watch videos before you jump into sub ohm. It can be dangerous. If you don't know about ohms.batteries and such. Just do some research first. i plan on it. just looking for a mech mod to actually USE with my omega. in the meantime, i will be learning though.
Vispera Posted March 4, 2014 Posted March 4, 2014 I like the nemmy more then the chi the nemmy seems better built
VapeEscape Posted March 4, 2014 Posted March 4, 2014 I own a magneto and a nemesis. Magneto for 30$ is a killer deal. I'd go with that.
sparc Posted March 5, 2014 Posted March 5, 2014 I own a magneto and a nemesis. Magneto for 30$ is a killer deal. I'd go with that. Especially if it has the Spider Man logo on the switch since it's a little difficult to find now.
Vispera Posted March 6, 2014 Posted March 6, 2014 Yes the v2 doesnt have the logo plus if you're gonna do sub ohms the adjustable pin has a spring that will melt on the v2
joejoevapekins Posted March 6, 2014 Posted March 6, 2014 I must have a unicorn lol. Have all the logos and the center pin is the brass screw to adjust to make What ever rba,rda using sit flush. But there is a spring it's in the derlin were the negative part of the battery sits
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now