Could use some help.

[BigClouds1021]

So I'm thinking about starting to get in to rebuild able atomizers and was wondering what atomizer would be a good one to start with. Any and all suggestions would be greatly appreciated. Thanks

[BigClouds1021]

Also a good site or thread to learn the basics would be helpful too.

[Joshuab3687]

Get yourself a Patriot clone to start out with. Make sure its the 22mm diameter one. Has a larger deck to work with for learning on. Once you get the hang of it, get one of everykind you can get your hands on! Lol! Here's where to get your Patriot clone;

http://www.fasttech.com/products/1411/10007050/1604700

[Joshuab3687]

Youtube Riptrippers or Grimmgreen for coil building tutorials

[BigClouds1021]

Cool. Thanks for the info Josh.

[Joshuab3687]

No prob! Hope it helps!

[Tam]

But before you buy anything, the first thing you should order is an ohm meter. Always go with safety first in building coils.

[BigClouds1021]

Ok thanks. Ordered a patriot clone last night and some wire and wicks. I'll go and pick up an ohms meter today. What would be a good ohms to start with?

[Vispera]

Ok thanks. Ordered a patriot clone last night and some wire and wicks. I'll go and pick up an ohms meter today. What would be a good ohms to start with?

What mod are you using also what batteries I would say start above 1 ohm and go from there do your research on batteries make sure what your using is safe

[VapeEscape]

You also need to get a Sony 30 amp battery too. To start of you want to sub ohm go with around 0.5

[Masta Splint]

Check YouTube there's tons of walk t hrews. I would start with a tank they use in a walk threw so its easy to follow and after you do 1 or a few and know what ur doing then start playing with other kinds. Just my 2 cents.

[BigClouds1021]

I have a k101 mod and efest 2500mah 35amp batteries.