BigClouds1021 Posted February 24, 2014 Share Posted February 24, 2014 So I'm thinking about starting to get in to rebuild able atomizers and was wondering what atomizer would be a good one to start with. Any and all suggestions would be greatly appreciated. Thanks Link to comment Share on other sites More sharing options...
BigClouds1021 Posted February 24, 2014 Author Share Posted February 24, 2014 Also a good site or thread to learn the basics would be helpful too. Link to comment Share on other sites More sharing options...
Joshuab3687 Posted February 24, 2014 Share Posted February 24, 2014 Get yourself a Patriot clone to start out with. Make sure its the 22mm diameter one. Has a larger deck to work with for learning on. Once you get the hang of it, get one of everykind you can get your hands on! Lol! Here's where to get your Patriot clone; http://www.fasttech.com/products/1411/10007050/1604700 Link to comment Share on other sites More sharing options...
Joshuab3687 Posted February 24, 2014 Share Posted February 24, 2014 Youtube Riptrippers or Grimmgreen for coil building tutorials RobChase 1 Link to comment Share on other sites More sharing options...
BigClouds1021 Posted February 24, 2014 Author Share Posted February 24, 2014 Cool. Thanks for the info Josh. Link to comment Share on other sites More sharing options...
Joshuab3687 Posted February 24, 2014 Share Posted February 24, 2014 No prob! Hope it helps! Link to comment Share on other sites More sharing options...
Tam Posted February 25, 2014 Share Posted February 25, 2014 But before you buy anything, the first thing you should order is an ohm meter. Always go with safety first in building coils. RobChase 1 Link to comment Share on other sites More sharing options...
BigClouds1021 Posted February 25, 2014 Author Share Posted February 25, 2014 Ok thanks. Ordered a patriot clone last night and some wire and wicks. I'll go and pick up an ohms meter today. What would be a good ohms to start with? Link to comment Share on other sites More sharing options...
Vispera Posted February 25, 2014 Share Posted February 25, 2014 Ok thanks. Ordered a patriot clone last night and some wire and wicks. I'll go and pick up an ohms meter today. What would be a good ohms to start with? What mod are you using also what batteries I would say start above 1 ohm and go from there do your research on batteries make sure what your using is safe Link to comment Share on other sites More sharing options...
VapeEscape Posted February 25, 2014 Share Posted February 25, 2014 You also need to get a Sony 30 amp battery too. To start of you want to sub ohm go with around 0.5 Link to comment Share on other sites More sharing options...
Masta Splint Posted February 25, 2014 Share Posted February 25, 2014 Check YouTube there's tons of walk t hrews. I would start with a tank they use in a walk threw so its easy to follow and after you do 1 or a few and know what ur doing then start playing with other kinds. Just my 2 cents. Link to comment Share on other sites More sharing options...
BigClouds1021 Posted February 25, 2014 Author Share Posted February 25, 2014 I have a k101 mod and efest 2500mah 35amp batteries. Vispera 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now