GEFFiCART Posted February 21, 2014 Posted February 21, 2014 (edited) I have another video up on YouTube. It's better than my first video, check it out! Edited February 21, 2014 by GEFFiCART Tam 1
Tam Posted February 21, 2014 Posted February 21, 2014 Cool vid, although it's way too advanced for where I'm at right now.
GEFFiCART Posted February 21, 2014 Author Posted February 21, 2014 Cool vid, although it's way too advanced for where I'm at right now. It's okay! Lol. There are many levels in vaping. And I want to continue to make videos for the wide range. From egos, to mods, to AVPs, to safety, whatever I learn or come across id like to share. Tam 1
Tam Posted February 21, 2014 Posted February 21, 2014 It's okay! Lol. There are many levels in vaping. And I want to continue to make videos for the wide range. From egos, to mods, to AVPs, to safety, whatever I learn or come across id like to share. I especially like all the info you give about ohms, how the ohms will decrease as you add more nano coils, etc. That's very good information for me at this point. Right now I'm still working on a single nano coil and getting it so the vapor doesn't try to remove my tonsils from the harshness. Lol.
Happy Vapor Posted February 26, 2014 Posted February 26, 2014 Love the video can't wait for my helios to get here so I have a bigger deck to build on.
Vispera Posted February 28, 2014 Posted February 28, 2014 I especially like all the info you give about ohms, how the ohms will decrease as you add more nano coils, etc. That's very good information for me at this point. Right now I'm still working on a single nano coil and getting it so the vapor doesn't try to remove my tonsils from the harshness. Lol. Try just micro coils first the nano coils are a hotter vape I build off a 5/64th bit wont be as hot and less harsh
Tam Posted February 28, 2014 Posted February 28, 2014 Try just micro coils first the nano coils are a hotter vape I build off a 5/64th bit wont be as hot and less harsh Would you mind repeating that in English? Oh, and I misspoke. I was making micro coils not nano coils using 30 gauge Kanthal 12 wraps around a 20 gauge needle. Should I use the bigger 5/64th bit instead? Hopefully I can find my drill bits. My SO has a bad habit of taking off with my tools and not returning them into my tool box.
Vispera Posted February 28, 2014 Posted February 28, 2014 (edited) Would you mind repeating that in English? Oh, and I misspoke. I was making micro coils not nano coils using 30 gauge Kanthal 12 wraps around a 20 gauge needle. Should I use the bigger 5/64th bit instead? Hopefully I can find my drill bits. My SO has a bad habit of taking off with my tools and not returning them into my tool box. what is the ohms on the 12 wraps Edited February 28, 2014 by Vispera
Tam Posted February 28, 2014 Posted February 28, 2014 If I remember correctly it was around 2.2 ohms.
Vispera Posted February 28, 2014 Posted February 28, 2014 (edited) Wow never had a coil that high in a rda make sure your air hole is lined up with the coil and I think I read you got lower nic juice I would go with less wraps and bring ohms down some 2.2 seems high Edited February 28, 2014 by Vispera
Tam Posted February 28, 2014 Posted February 28, 2014 Wow never had a coil that high in a rda make sure your air hole is lined up with the coil and I think I read you got lower nic juice I would go with less wraps and bring ohms down some 2.2 seems high I'm just talented that way. *rolls eyes at self* Is it not good to have that high an ohm for RDAs?
Vispera Posted February 28, 2014 Posted February 28, 2014 I'm just talented that way. *rolls eyes at self* Is it not good to have that high an ohm for RDAs? I sub ohm but I have I 1.3 in my kayfun that I like 2.2 would just take longer to heat up so lower ohms would be better I would shot for a 1.5-1.2 for a single coil build for duel I would go for 2.0 on each that would put you at about 1 ohm
Tam Posted February 28, 2014 Posted February 28, 2014 I sub ohm but I have I 1.3 in my kayfun that I like 2.2 would just take longer to heat up so lower ohms would be better I would shot for a 1.5-1.2 for a single coil build for duel I would go for 2.0 on each that would put you at about 1 ohm Thanks for the advice. I'll give that a try. Vispera 1
Vispera Posted February 28, 2014 Posted February 28, 2014 Thanks for the advice. I'll give that a try. Good luck it took a few builds for me to get the hang of it Tam 1
Joshuab3687 Posted February 28, 2014 Posted February 28, 2014 Wrapping on a 20g needle is equivalent to a 1/32nd bit and thus its a "nano". Wrapping on a 5/64th bit or 12g needle is considered a "micro". I've seen "macro" coils done using a loose wrap method hand wound around doubled up silica.
Tam Posted February 28, 2014 Posted February 28, 2014 Wrapping on a 20g needle is equivalent to a 1/32nd bit and thus its a "nano". Wrapping on a 5/64th bit or 12g needle is considered a "micro". I've seen "macro" coils done using a loose wrap method hand wound around doubled up silica. Good info to know. Thanks!
Rcam1977 Posted March 18, 2014 Posted March 18, 2014 (edited) Try just micro coils first the nano coils are a hotter vape I build off a 5/64th bit wont be as hot and less harshPlus 2 in the added info about the ohms, very useful info for anybody just starting out, I would have thought for sure by doubling the coils it would double the ohms, I've watched a tone of vids and don't recall anybody explaining that so thanks alot, I look ok forward to your future build tutorials Edited March 18, 2014 by Rcam1977
GEFFiCART Posted March 18, 2014 Author Posted March 18, 2014 Plus 2 in the added info about the ohms, very useful info for anybody just starting out, I would have thought for sure by doubling the coils it would double the ohms, I've watched a tone of vids and don't recall anybody explaining that so thanks alot, I look ok forward to your future build tutorials Thanks! I just don't want anyone getting hurt in building. I mean the occasional burn and/or stick with a needle is common haha To add on to things I've just got a job at my favorite B&M in their soon to be newest location, its exciting. Are there any types of builds any of you would like for me to do? or get information to explain about a topic or issue?
Rcam1977 Posted March 18, 2014 Posted March 18, 2014 Thanks! I just don't want anyone getting hurt in building. I mean the occasional burn and/or stick with a needle is common haha To add on to things I've just got a job at my favorite B&M in their soon to be newest location, its exciting. Are there any types of builds any of you would like for me to do? or get information to explain about a topic or issue? Have you tried the Clapton Coil yet? That looks pretty interesting. Personally I can't wait to get my nimbus and try a dual dragon coil build
GEFFiCART Posted March 18, 2014 Author Posted March 18, 2014 Have you tried the Clapton Coil yet? That looks pretty interesting. Personally I can't wait to get my nimbus and try a dual dragon coil build I haven't yet but all I have for kanthal is 28g and 30g. Those aren't the ideal gauges for that coil
Rcam1977 Posted March 18, 2014 Posted March 18, 2014 I haven't yet but all I have for kanthal is 28g and 30g. Those aren't the ideal gauges for that coil , Yeah that's what I ordered as well, I'm looking forward to doing some twisted wire builds
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now