Happy Vapor Posted February 28, 2014 Share Posted February 28, 2014 Mine gurgles a little. No spitting or anything like that. Just a soft gurgle. I just right now rebuilt the coil in mine. No more gurgle. Knock on wood. Link to comment Share on other sites More sharing options...
Vispera Posted February 28, 2014 Share Posted February 28, 2014 I really need to get me one im hearing to many good things Link to comment Share on other sites More sharing options...
Happy Vapor Posted February 28, 2014 Share Posted February 28, 2014 I really need to get me one im hearing to many good things you won't be disappointed. Link to comment Share on other sites More sharing options...
METALHEAD Posted February 28, 2014 Share Posted February 28, 2014 So I got this tank in the mail a few days ago and I hate to say it but I'm disappointed. I have read so many great things about it that I feel like I must have either gotten a bad coil or its me. I gotta suck on this tank like a vacuum to keep the wick wet enough to produce nice vapor without giving me a dry hit. The small hole is IMO too small to Vape on but I use it to prime the wick by sucking hard on that hole and then switching to one of the larger ones to Vape on. I found if I drip a few drops of juice down the chimney it Vapes awesome, nice clouds, I don't have to suck like a fiend and I have a much more pleasant experience. I wrote to Aspire to see what they think. Maybe the holes in my coil assembly are too small or something. Maybe quality control is dropping as they are trying to keep up with production. Maybe its me. Thoughts? Link to comment Share on other sites More sharing options...
Happy Vapor Posted February 28, 2014 Share Posted February 28, 2014 Remove the rubber cap from your coil. It should fix your problem Link to comment Share on other sites More sharing options...
METALHEAD Posted February 28, 2014 Share Posted February 28, 2014 These don't have the rubber cap on them if I'm thinking of the same thing you are. Link to comment Share on other sites More sharing options...
Aquatroy Posted March 1, 2014 Share Posted March 1, 2014 Yeah I don't have any rubber cap... Link to comment Share on other sites More sharing options...
Happy Vapor Posted March 1, 2014 Share Posted March 1, 2014 Sorry brain far I was thinking of kanger coils. Duh. Link to comment Share on other sites More sharing options...
Jeffb Posted March 1, 2014 Share Posted March 1, 2014 So I got this tank in the mail a few days ago and I hate to say it but I'm disappointed. I have read so many great things about it that I feel like I must have either gotten a bad coil or its me. I gotta suck on this tank like a vacuum to keep the wick wet enough to produce nice vapor without giving me a dry hit. The small hole is IMO too small to Vape on but I use it to prime the wick by sucking hard on that hole and then switching to one of the larger ones to Vape on. I found if I drip a few drops of juice down the chimney it Vapes awesome, nice clouds, I don't have to suck like a fiend and I have a much more pleasant experience. I wrote to Aspire to see what they think. Maybe the holes in my coil assembly are too small or something. Maybe quality control is dropping as they are trying to keep up with production. Maybe its me. Thoughts? It could be the coil. Have you tried a different one yet? Link to comment Share on other sites More sharing options...
METALHEAD Posted March 1, 2014 Share Posted March 1, 2014 It could be the coil. Have you tried a different one yet? I did but no luck. I am having some luck with the tank loosened up. Ive been tightening the glass down till it stops. Not torquing it but snugging it down. I tried loosening it up 2 turnes and I got some bubbles float up and much better function. Still doesn't seem right though. Link to comment Share on other sites More sharing options...
RobChase Posted March 2, 2014 Share Posted March 2, 2014 What device are you using it on. Link to comment Share on other sites More sharing options...
RobChase Posted March 2, 2014 Share Posted March 2, 2014 I've been using mine since they came out. I bought some replacement coils and every one of them seemed to work ok but not as good as factory ones it came with. After a few days of use it started to gurgle and leak out of air hole. Still trying to figure out the build on these. Did one but it stunk. Link to comment Share on other sites More sharing options...
METALHEAD Posted March 3, 2014 Share Posted March 3, 2014 What device are you using it on. Vamo V5. Been playing with wattages and voltages. It seems to be improving a little bit but I have to keep messing with the tightness of the tanks lower seal. Link to comment Share on other sites More sharing options...
Dasfriek Posted March 3, 2014 Share Posted March 3, 2014 Try a different mod, my Vamo hates 1 certain PT base I own out of 3. It's draw is way too tight no matter how much I can't see any differences in it and used every trick to modify it to correct it. Btw it works perfect on my other mods. Link to comment Share on other sites More sharing options...
Imnukingfutz Posted March 4, 2014 Share Posted March 4, 2014 Anybody having any flooding gurgle issues? I'm hearing about em...mine maybe just barely, kinda draws like a dripping 357... yes, open your air holes to a larger setting and it goes away. It usually happens when the tank is filled to its max (5 ml). I fill mine to about 4 ml and dont have the issues. Link to comment Share on other sites More sharing options...
Compenstine Posted March 4, 2014 Share Posted March 4, 2014 I would get one but the cost of the coils are IMO are too expensive. I would like to get my hands on a few of the coils and see if they can be rebuilt though. If I know I can rebuild the attys I probably would pick one up. Link to comment Share on other sites More sharing options...
RobChase Posted March 4, 2014 Share Posted March 4, 2014 I would get one but the cost of the coils are IMO are too expensive. I would like to get my hands on a few of the coils and see if they can be rebuilt though. If I know I can rebuild the attys I probably would pick one up. They can be rebuilt. Fairly easy from what I see. Most videos I've seen use a single coil around 1.5 to 1.8 ohm. They use cotton for wicking material. Unlike in a rda they make the cotton very tight in the coil. I tried to do it once. Got everything set up and I just didn't like the taste of it with cotton. I've just bought replacement coils. You are right very expensive. Over 3$ per Compenstine 1 Link to comment Share on other sites More sharing options...
Imnukingfutz Posted March 4, 2014 Share Posted March 4, 2014 Vamo V5. Been playing with wattages and voltages. It seems to be improving a little bit but I have to keep messing with the tightness of the tanks lower seal. If I use it on my Kamry, I have to crank the VV to 5.0 to get decent flavor and cloud out of it...it even is easier to draw upon when its hotter...for me at least. I do not have that issue on my VTR running @ 8w. Link to comment Share on other sites More sharing options...
METALHEAD Posted March 4, 2014 Share Posted March 4, 2014 If I use it on my Kamry, I have to crank the VV to 5.0 to get decent flavor and cloud out of it...it even is easier to draw upon when its hotter...for me at least. I do not have that issue on my VTR running @ 8w. Well I switched to some thinner liquid and its working better. I was using bobas bounty (100%vg) I switched to some 80/20 , put in a new coil and it seems to working now but it really should be able to handle whatever I throw at it, especially with all the positive reviews it gets. Maybe the hype set me up for disappointment. When it works its Very good. Link to comment Share on other sites More sharing options...
Compenstine Posted March 4, 2014 Share Posted March 4, 2014 They can be rebuilt. Fairly easy from what I see. Most videos I've seen use a single coil around 1.5 to 1.8 ohm. They use cotton for wicking material. Unlike in a rda they make the cotton very tight in the coil. I tried to do it once. Got everything set up and I just didn't like the taste of it with cotton. I've just bought replacement coils. You are right very expensive. Over 3$ per Thank for the info Rob I'll look into this RobChase 1 Link to comment Share on other sites More sharing options...
Joshuab3687 Posted March 4, 2014 Share Posted March 4, 2014 Thank for the info Rob I'll look into this If I'm not mistaken Comp, RipTrippers shows a rebuild on the nautilus coil. RobChase 1 Link to comment Share on other sites More sharing options...
Compenstine Posted March 4, 2014 Share Posted March 4, 2014 Thanks Josh, Going do a search now. Edit: That don't look so hard just have to watch what your doing. Joshuab3687 1 Link to comment Share on other sites More sharing options...
Aquatroy Posted March 5, 2014 Share Posted March 5, 2014 I'll throw my oldies your way Comp... And agreed happy when it's spot on, but finding just keeping it filled more than 2 mil and turning it up when it floods takes care of most of its shortcomings. And we're getting 4.99 per in the shop...I'm sticking with Kanger and aero replacements for now.. Link to comment Share on other sites More sharing options...
Joshuab3687 Posted March 5, 2014 Share Posted March 5, 2014 Thanks Josh, Going do a search now. Edit: That don't look so hard just have to watch what your doing. Yeah, that'd be a job for my Borg outfit! Lol Link to comment Share on other sites More sharing options...
Compenstine Posted March 5, 2014 Share Posted March 5, 2014 I just saw the shot outs for me on Page 2 LOL sorry guys next time throw a PM my way I've been really busy and a PM will grab my attention. I quite often leave VT open in the back ground so it may seem as if I'm online but may be away from the computer. Thanks for the extras Troy they will come in handy. I will be sending you some of the rebuilds for testing. RobChase 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now