tornadochaser Posted February 7, 2014 Posted February 7, 2014 I have just upgraded my innokin itaste vv 3.0 to using a kanger protank 2 from the generic or look alike kanger mini protank and noticed on the itaste digital display the atomizer shows 1.9. the generic tank and atomizer showed 2.4... I am wondering what i should have the voltage and wattage set at, currently the voltage is set for 3.7 and the wattage is set for 8 i believe. i want to make sure i am getting the best vapor and flavor production possible. i looked at a provari last night but not real sure i want to spend almost $200.00 for a very similar ( i think) device
Aquatroy Posted February 7, 2014 Posted February 7, 2014 Okay, your either in VV or VW mode, can't do both, so whatever you left it on last is what your running, I like VW....anywhere from 6.5 to 9 watts depending on the juice and tank and how old the coil is... joe2003 1
joe2003 Posted February 7, 2014 Posted February 7, 2014 (edited) First you have to decide which setting you want to use,your device doesn't do both at the same time.If you want to decide the voltage set your device for vv. If you want your device to set the voltage depending on the ohms of the coil you put on it set your device for VW. As far as where to set it that depends on your tastes.Most folks will tell you to start at a low setting and gradually go up until it tastes best to you without tasting burnt. Hah Troy beat me to it lol I type so slow Edited February 7, 2014 by joe2003
tornadochaser Posted February 7, 2014 Author Posted February 7, 2014 ok, to get the best flavor and vapor from it, what is a better setting voltage or wattage. i had an ego before and had so much problems with tank leakage i gave up on the whole idea of vaping until this past christmas eve when i got my itaste and so far enjoying the itaste i just want it to be working the best it can
joe2003 Posted February 7, 2014 Posted February 7, 2014 There is no best,there is only what suits you.It doesn't matter if you set the voltage or let the unit set it for you,the result will be almost the same. The unit can detect the ohms of a coil and always adjust the voltage so that you get the same wattage and can even adjust for changes to the same coil over time or you can set the volts each time you change coils to suit your taste. If you don't understand volts,ohms,or watts you might want to spend some time learning about them.They can make or break your vape.
Aquatroy Posted February 7, 2014 Posted February 7, 2014 Everyone's different .... I like set on power/ watts...here's a good quick read on it...makes it easier for you to understand.. http://content.spinfuel.com/taking-the-mystery-out-of-variable-wattage/
joe2003 Posted February 7, 2014 Posted February 7, 2014 (edited) You should also check out PBusardo's channel on you tube,he has some good vids on ohms law etc... Edited February 7, 2014 by joe2003
tornadochaser Posted February 7, 2014 Author Posted February 7, 2014 just set it to power/watts. going to try it out for a day or 2 and see how it is. almost like getting a new toy.
Aquatroy Posted February 7, 2014 Posted February 7, 2014 Yep, just turn it up to 7-8 watts, and then adjust till you find your sweet spot...enjoy!
Joshuab3687 Posted February 7, 2014 Posted February 7, 2014 I'm constantly adjusting my apv. Its just in my nature to always be tinkering. Once I find my sweet spot, I'll vape the hell out of it and then refill with a diff flavor then start fidling with it again. Lol
tornadochaser Posted February 7, 2014 Author Posted February 7, 2014 glad i got the itaste vv device. it seems to be good quality and the battery last all day. the ego wasnt bad until the tank decided to do nothing but leak no matter what i did with it. when it made my new leather jacket pocket a sticky mess that was the end of it. so far no leaks with either the clone kanger mini or the kanger protank 2 course only had the protank 2 over night.
Aquatroy Posted February 7, 2014 Posted February 7, 2014 Itaste VV 3 is a great unit to start on, but be careful, as all tanks will leak sooner or later..it's the nature of the beast unfortunately ....
Joshuab3687 Posted February 7, 2014 Posted February 7, 2014 Itaste VV 3 is a great unit to start on, but be careful, as all tanks will leak sooner or later..it's the nature of the beast unfortunately .... All poly(plastic) tanks you mean right?
Aquatroy Posted February 7, 2014 Posted February 7, 2014 (edited) Polycarbonate = Plastic I meant all tanks, plastic, glass, metal, all have issues from time to time. Lost o rings, worn threads, poor construction. It will leak..sooner or later.... Edited February 7, 2014 by Aquatroy Joshuab3687 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now