Joe955 Posted January 30, 2014 Share Posted January 30, 2014 New to vaping and I recently bought an ihybrid from a local vapor store. They set it up for me and everything worked great, for about 4 days. Now it completely stopped working. Batteries are charged, juice is full, but when I click the button on the bottom there are no signs of it working. I would take it back to the shop but I work before they open and after they close, only day I have off is Sunday. One thing I did notice is the wick seems burnt? It's pitch black but I only used it for 4 days. Is there something I need to clean? Thanks Link to comment Share on other sites More sharing options...
Joe955 Posted January 30, 2014 Author Share Posted January 30, 2014 Just noticed I posted this in the wrong section. Link to comment Share on other sites More sharing options...
Jerryosterdockjr597 Posted January 30, 2014 Share Posted January 30, 2014 What kind ya got Link to comment Share on other sites More sharing options...
Joe955 Posted January 30, 2014 Author Share Posted January 30, 2014 Ihybrid pure Link to comment Share on other sites More sharing options...
Mrwaylon Posted January 30, 2014 Share Posted January 30, 2014 Can you post some pictures please. Link to comment Share on other sites More sharing options...
Joe955 Posted January 30, 2014 Author Share Posted January 30, 2014 Link to comment Share on other sites More sharing options...
Proetus Posted January 31, 2014 Share Posted January 31, 2014 (edited) My bet is your coil is broken. I don't know enough about the Ihybrid to know if the deck us conductive or not. Looks like ss cable with something wrapped around the top portion of the cable. Entirely possible it's shorting out. Either case,proceed safely. Edited January 31, 2014 by Proetus Link to comment Share on other sites More sharing options...
joejoevapekins Posted January 31, 2014 Share Posted January 31, 2014 Looks like cable with ekowool jacket. Did you oxidize the ss cable? Link to comment Share on other sites More sharing options...
Bebop Posted January 31, 2014 Share Posted January 31, 2014 If you cleaned it up we might be able to see it better. If its not firing at all its likely shorted out at the coil or the coil is fried. Look for a break in the coil or a short (coil touch the deck). Also check the posts with a meter to confirm the battery is connected and its not a switch problem. Link to comment Share on other sites More sharing options...
IMEDICx90 Posted February 1, 2014 Share Posted February 1, 2014 If bet the positive leg popped. The coil looks sloppy so you probably had hot spots. You could always just rewrap it and make a fresh coil. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now