HelloMiakoda Posted January 26, 2014 Posted January 26, 2014 One of my clearomizers keeps giving me a blinking error on my ego. If I take it off and put it back on a few times, it'll fire and work indefinately till I take it off a while. The threads look good, nothing seems shorted, and I dont get the error with any of my others. Is there something I might be missing?
DragonGunner Posted January 26, 2014 Posted January 26, 2014 Is it a rebuilt coil head? If so it sounds like a short from the head. I remember one time when I rebuilt a protank head and it was around .9 ohms and it blinked and wouldn't fire because my vision spinner could not handle such a low ohm head (I then remembered it was .9 ohms and promptly removed it and replaced it with another higher ohm head and it worked just fine). I'm sure others with more experience will provide a better diagnosis.
Bebop Posted January 26, 2014 Posted January 26, 2014 Yes. Most likely a short in the coil. You can use a tooth pick to move it
HelloMiakoda Posted January 28, 2014 Author Posted January 28, 2014 Not a rebuild. I'm getting errors on other clearos now, so I think my battery is having issues. Especially since I vaped all weekend on the "bad" clearo, but a different battery, had no issues.
Bebop Posted January 28, 2014 Posted January 28, 2014 Guess you could clean the battery (threads and post) and also clean your charger as well. If it won't take a charge or continues to behave badly you could always get a cool new battery DragonGunner 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now