Grant951 Posted January 18, 2014 Share Posted January 18, 2014 So I've been rebuilding my Protanks and where exactly they get to about 3/4 empty they start to leak like mad. It's super irritating. I get amazing vapor and flavor up until that point though. What do? Link to comment Share on other sites More sharing options...
Rixter Posted January 18, 2014 Share Posted January 18, 2014 What size wick/wicks are you using? spydre 1 Link to comment Share on other sites More sharing options...
Grant951 Posted January 18, 2014 Author Share Posted January 18, 2014 10 wraps of 30 gauge around a 1/16th drip bit and then torched. And I'm using cotton with a flavor wick. Link to comment Share on other sites More sharing options...
spydre Posted January 18, 2014 Share Posted January 18, 2014 Rix, is there a certain amount of cotton that you need? Link to comment Share on other sites More sharing options...
Rixter Posted January 18, 2014 Share Posted January 18, 2014 The most common reason re-built KPTs leak is because there's not enough wick filling the side slots of the atomizer body, so juice flows past the wick and into the air passage. Too much wick and it'll impede the juice flow to the coil. I use 3.5mm silica wick and I don't have leaking issues, so you're going to need to aim for a total of roughly 3.5mm of wick material (including the main wick & flavor wicks if you use them). Link to comment Share on other sites More sharing options...
mikelove Posted January 18, 2014 Share Posted January 18, 2014 What gauge kanthal do you use rixter Link to comment Share on other sites More sharing options...
Rixter Posted January 18, 2014 Share Posted January 18, 2014 What gauge kanthal do you use rixter I use 32g for most KPT re-builds, but have made a few using 29g. Link to comment Share on other sites More sharing options...
mikelove Posted January 18, 2014 Share Posted January 18, 2014 Lots of vapor? How many wraps Link to comment Share on other sites More sharing options...
Rixter Posted January 18, 2014 Share Posted January 18, 2014 (edited) Lots of vapor? How many wraps 4/3 wrap of 32g Kanthal A-1 around a 3.5mm silica wick to achieve a 1.8Ω coil. Vapes beautifully from full tank to dry tank. Edited January 18, 2014 by Rixter Link to comment Share on other sites More sharing options...
mikelove Posted January 18, 2014 Share Posted January 18, 2014 Cool thanks Link to comment Share on other sites More sharing options...
mikelove Posted January 18, 2014 Share Posted January 18, 2014 I try micro and nano coils not really impressed. Don't know if its cause my max watts is 11 or what Link to comment Share on other sites More sharing options...
Grant951 Posted January 19, 2014 Author Share Posted January 19, 2014 (edited) The most common reason re-built KPTs leak is because there's not enough wick filling the side slots of the atomizer body, so juice flows past the wick and into the air passage. Too much wick and it'll impede the juice flow to the coil. I use 3.5mm silica wick and I don't have leaking issues, so you're going to need to aim for a total of roughly 3.5mm of wick material (including the main wick & flavor wicks if you use them). Side slots as in where the wicks peek out? I cut them almost flush but not quite. The juice actually seems to mainly leak out the sides of the coil (not through the little hole) and not just on one coil, but every single one I rebuild. Edited January 19, 2014 by Grant951 Link to comment Share on other sites More sharing options...
Compenstine Posted January 19, 2014 Share Posted January 19, 2014 Side slots as in where the wicks peek out? I cut them almost flush but not quite. The juice actually seems to mainly leak out the sides of the coil (not through the little hole) and not just on one coil, but every single one I rebuild. Then it is only 1 of two things. Your O ring is bad or it is not tight. My guess since you say they are tight, is that there is a problem with the O ring on the base of the coil. Link to comment Share on other sites More sharing options...
VapeEscape Posted January 19, 2014 Share Posted January 19, 2014 I threw my KPT away becuase i had nothing but issues with it. but from what ive seen from friends its the wicking that causes the leaks as said above. Link to comment Share on other sites More sharing options...
Grant951 Posted January 19, 2014 Author Share Posted January 19, 2014 Then it is only 1 of two things. Your O ring is bad or it is not tight. My guess since you say they are tight, is that there is a problem with the O ring on the base of the coil. I'll check on this. Link to comment Share on other sites More sharing options...
Bebop Posted January 19, 2014 Share Posted January 19, 2014 Side slots as in where the wicks peek out? I cut them almost flush but not quite. The juice actually seems to mainly leak out the sides of the coil (not through the little hole) and not just on one coil, but every single one I rebuild. Flush with what? You don't mean the holes do you? spydre 1 Link to comment Share on other sites More sharing options...
spydre Posted January 19, 2014 Share Posted January 19, 2014 Yeah, if you look at OEM coils, they extend past the holes. Flush with what? You don't mean the holes do you? Link to comment Share on other sites More sharing options...
Aquatroy Posted January 19, 2014 Share Posted January 19, 2014 Your base could be getting wore out, threads get funky, try changing your bases... Link to comment Share on other sites More sharing options...
joejoevapekins Posted January 20, 2014 Share Posted January 20, 2014 Had this problem when i first started rebuilding my own. After a few trial and errors i found what works for is to wrap my coil on a Allen key that has just enough space to slid into slots with just a touch of play in it to slid it out once i have the coil in place. Then take some cotton from a ball and make my wick twist one end to a point and put it through the coil and twist it like a screw and it threads itself to the other side. Fluff the pointed end and trim it to were it sticks out just a small amount repeat on the other side. Place a few drops of juice on the wick and coil. And put it all back together and back to vapehappy. If my orings are having problems i go to the autoparts store and get the size i need. Usually i use the green ones that are used in ac and heating repair. Green in color and hold up great Link to comment Share on other sites More sharing options...
Grant951 Posted January 21, 2014 Author Share Posted January 21, 2014 (edited) Flush with what? You don't mean the holes do you? No, lol. The base of the coil. I have noticed when it starts leaking that if I take it apart dry everything out (except for the tank) and re assemble it I can vape it dry. I don't get it... Also all my o rings and threads are perfectly intact. Edited January 21, 2014 by Grant951 Link to comment Share on other sites More sharing options...
Rixter Posted January 21, 2014 Share Posted January 21, 2014 Well...that leaves "defective KPT" or "demonic possession". spydre and Joshuab3687 2 Link to comment Share on other sites More sharing options...
joejoevapekins Posted January 21, 2014 Share Posted January 21, 2014 Revenge of the vape gnomes Joshuab3687 1 Link to comment Share on other sites More sharing options...
Joshuab3687 Posted January 21, 2014 Share Posted January 21, 2014 Well...that leaves "defective KPT" or "demonic possession". I'm with Rixter on the "demonic possesion"! Lol Link to comment Share on other sites More sharing options...
spydre Posted January 21, 2014 Share Posted January 21, 2014 As having been the victim of demonic tank possession before, I agree with Rixter. Link to comment Share on other sites More sharing options...
Bebop Posted January 21, 2014 Share Posted January 21, 2014 (edited) This is my final guess, since I can't see your rebuild) - you say you use cotton. I would bet your cotton wick does not have enough material. The juice is flowing too heavily to the coil and is not restricted enough. Remember, as the juice wicks and is constantly being fired by the coil, the wick contracts and gets gooey with deposits from sugars and whatnot in flavoring. This does two things, the wick loses its elasticity(stays compressed) and loses its ability to hold the juice. Once that happens the juice gets by the coil and into the airway and battery. Try beefing up your wick (more cotton) and not necessarily more flavor wick. (I don't believe in demons. ) Edited January 21, 2014 by Bebop12 spydre 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now