IMEDICx90 Posted March 17, 2014 Posted March 17, 2014 Hey pro I grabbed 2 DNA 30 boards.... Now I just need to gather the rest. I hope I'll be able to follow your build. and any idea of an enclosure that's slightly wider then yours? Maybe a half inch or so? I wanna make a bottom feeder.
Proetus Posted March 17, 2014 Author Posted March 17, 2014 Check Hammond enclosures, various sizes. Not sure what happened but dna is acting up. I lost the ability to adjust wattage yesterday. Turned out to be a bad button, no big deal replaced em both to be safe. Well now my screen is extremely dim and doesn't brighten when firing. It is also only outputting at 3 volts regardless of wattage and resistance. Awaiting reply from evolv.
IMEDICx90 Posted March 17, 2014 Posted March 17, 2014 Could your ground not be making a solid connection? Like enough that it will work, just not enough to allow enough current to access the hot legs?
Proetus Posted March 17, 2014 Author Posted March 17, 2014 (edited) I suppose anything is possible. I'll have a peek at it tomorrow night, i'm irritated with it at the moment. I have 2 DNA30's showing up tomorrow, maybe i'll just swap it out. Edited March 17, 2014 by Proetus
Compenstine Posted March 17, 2014 Posted March 17, 2014 If either one of you want to sell one of your DNA 30s just PM me. I decided to deviate from my other build. I have an old 1930s 40x40 view camera. It is made from 1st gen mahogany. I'm going to be using the wood for a DNA 20 or 30 build. I would like to put a DNA 30 in it. The wood is worth way more than the camera and it will make a beautiful mod. There is enough wood to do maybe 10-15 mods.
Compenstine Posted March 17, 2014 Posted March 17, 2014 Never mind, I see House of Vapors finally has them in stock . LOL I didn't think you would be willing part with them anyway. I'll be ordering 1 today.
IMEDICx90 Posted March 17, 2014 Posted March 17, 2014 I would have comp lol. In trade for a bit of wood!
Compenstine Posted March 17, 2014 Posted March 17, 2014 I would have comp lol. In trade for a bit of wood! That still may be possible, do have enough for a few mods. Let me see how much I can salvage and if you still have one, I would trade you enough to build a mod. I know I want to build a couple stands too. I think it would be cool to have a nice Wood Box DNA 30 and a stand in matching wood for my personal collection. I'm glad Proetus did this thread, I will be looking at it as I start buying parts.
Proetus Posted March 17, 2014 Author Posted March 17, 2014 My DNA20 board is being RMA'd. However on the plus side my 30's arrived today so i'll just turn it into a 30! Compenstine 1
IMEDICx90 Posted March 17, 2014 Posted March 17, 2014 My DNA20 board is being RMA'd. However on the plus side my 30's arrived today so i'll just turn it into a 30! What does RMA'd Mean? Lol
fishguy1123 Posted March 17, 2014 Posted March 17, 2014 And he sells the new one at low price since he has the 30's comeing...... lol JK!
Proetus Posted March 17, 2014 Author Posted March 17, 2014 30's are here! Probably put one together in the 20 shell tomorrow night!
Proetus Posted March 20, 2014 Author Posted March 20, 2014 Didn't have much time during the week to replace the rma'd 20 with a 30, so without further ado, here we go! New screen cradle as i broke the black one getting out the 20. About 20 minutes of filing in order to get this one to fit.
Proetus Posted March 20, 2014 Author Posted March 20, 2014 Small teaser of one of the upcoming builds..left one, not the side by side.
Vispera Posted March 20, 2014 Posted March 20, 2014 Small teaser of one of the upcoming builds..left one, not the side by side. That is purrdy I want take my money
Proetus Posted March 20, 2014 Author Posted March 20, 2014 Neither are my design. They are created by Bapgood on ECF. He makes the schematics and then www.shapeways.com makes the pieces to the schematics he comes up with. He is also the creator of the dna screen cradle. The side by side was something he worked up and requires special parts he mills, so that is likely unattainable. However the parts for the left one is going to happen in the future.
Vispera Posted March 21, 2014 Posted March 21, 2014 Neither are my design. They are created by Bapgood on ECF. He makes the schematics and then www.shapeways.com makes the pieces to the schematics he comes up with. He is also the creator of the dna screen cradle. The side by side was something he worked up and requires special parts he mills, so that is likely unattainable. However the parts for the left one is going to happen in the future. Im just gonna have to bite the bullet and do it I fix computers I should be fine on a dna
Proetus Posted March 21, 2014 Author Posted March 21, 2014 It's really not hard to do at all. As long as you follow basic safety procedures and have a good iron, you're all set. There are writeups everywhere. Honestly ECF probably has the most info pertaining to mod's. It's ridiculous how many are over there!
Proetus Posted March 21, 2014 Author Posted March 21, 2014 It's baaaackkkkkkkk. And my DNA20 is reborn into a DNA30! Tip of the day... the original battery holder from FT won't fire at 30watts. Fires fine at 20, but not at 30! I will upgrade to keystone Battery holders soon enough. Easily enough accomplished in the future. Important part is I have a 20w mod back!
Compenstine Posted March 21, 2014 Posted March 21, 2014 That is a sharp looking build though. Nice job!
Proetus Posted March 21, 2014 Author Posted March 21, 2014 (edited) With a Nimbus Clone Click for video! Click for video! Edited March 21, 2014 by Proetus
Proetus Posted March 21, 2014 Author Posted March 21, 2014 reload the page and try it again. had to fix the links.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now