tea2085 Posted January 12, 2014 Share Posted January 12, 2014 When in the heck do you change them? I have an Aspire tank and love how it gurgles even for a second after I take my hit- but a read a thread from a woman who c/o the gurgling. I'm new to vaping and have yet to be clear on when to put in a new coil. Paul Link to comment Share on other sites More sharing options...
Bebop Posted January 12, 2014 Share Posted January 12, 2014 (edited) Dont confuse "gurgling" , the sounds liquid makes when it gets in to the air path (bad thing) with the "sizzle" or "pop" of the juice vaporizing off the hot coil. (Very cool) Two very different things As for when to change coils.... usually when you get a burnt type flavor that doesnt go away or you get leaking or excessive gurgling or flavor just goes away or the coil shorts and wont fire anymore Edited January 12, 2014 by Bebop12 Link to comment Share on other sites More sharing options...
dannyk Posted January 12, 2014 Share Posted January 12, 2014 Gurgling is normally from liquid in the center tube. Change the coil when vapour diminshes and you start to get burnt tastes and dry hits.Easy to change, unscrew the base and just twist out the coil, put a new one in, put the base back on and go Link to comment Share on other sites More sharing options...
mcquinn Posted January 13, 2014 Share Posted January 13, 2014 I agree, when the vapor quality and quantity diminishes it's time for a new one They do get condensation in the airway and you can blow them out into a paper towel or napkin. You also need to watch out for condensation in the connector on the battery as it will decrease vapor output. lydiab71 and spydre 2 Link to comment Share on other sites More sharing options...
tea2085 Posted January 13, 2014 Author Share Posted January 13, 2014 Where, exactly, is the connector on the battery? Paul Link to comment Share on other sites More sharing options...
Tam Posted January 13, 2014 Share Posted January 13, 2014 The connector is at the top of the battery where you "connect" the battery to your Aspire. It looks a little like a cup with threads either on the inside, outside or both. Liquid can accumulate inside of that so you need to dab it out with some tissue, paper towel or Q-tip periodically. That will get the gurgle out as well as keeping your battery connection clean. Be careful not to push too hard when doing this so you don't push the center connection pin down. Link to comment Share on other sites More sharing options...
tea2085 Posted January 13, 2014 Author Share Posted January 13, 2014 Now I get it, thanks Tam! Paul Tam 1 Link to comment Share on other sites More sharing options...
fjs340 Posted January 14, 2014 Share Posted January 14, 2014 I agree, when the vapor quality and quantity diminishes it's time for a new one They do get condensation in the airway and you can blow them out into a paper towel or napkin. You also need to watch out for condensation in the connector on the battery as it will decrease vapor output. I am getting excessive amounts with some of my favorite juices, I just figured it out. I thought it was all leak thru but on a brand new coil that is very unlikely, correct? How can I reduce this condensation? Sometimes I have to point my EVOD up to the sky to get a decent hit? Would a different Ohm coil help, using 2.5 now? Link to comment Share on other sites More sharing options...
WillBlack Posted January 14, 2014 Share Posted January 14, 2014 FWIW on the vivi style Aspire the 'throat' where your drip tip goes is rather deep. If you choose to use other drip tips try to use one that extends further into the cap. The shorter ones leave a gap where condensation tends to accumulate This an example of a longer one. Here are some shorter ones, quite common with cheaper China mades. Link to comment Share on other sites More sharing options...
RobChase Posted January 16, 2014 Share Posted January 16, 2014 I have an Aspire tank and love it. The coils seem to last longer than all my coils for my evod or protanks. I usually have to change protank coils once a week. Been vaping the Aspire and it's still going strong. Don't change it until you get a burnt taste or it's not firing right. Good luck. Link to comment Share on other sites More sharing options...
spydre Posted January 18, 2014 Share Posted January 18, 2014 Hey, guys, if I could. For those of you that have experience with the Aspire, how it performs, how it compares to other tanks, there's another thread going here: and I would like your feedback on the Aspire. Link to comment Share on other sites More sharing options...
fjs340 Posted January 25, 2014 Share Posted January 25, 2014 Had a new out of the pack 1.8 coil taste burned on first hit today. Kanger really needs to do something about QC on these things! Link to comment Share on other sites More sharing options...
Love2VapeDaily Posted January 25, 2014 Share Posted January 25, 2014 been a while since i posted. glad to see new faces here. i change my coils whenever performance goes down or if i change flavors. so about once every 2 weeks. but some flavors do a number on coils sooner than others. Link to comment Share on other sites More sharing options...
mikelove Posted January 25, 2014 Share Posted January 25, 2014 Had a new out of the pack 1.8 coil taste burned on first hit today. Kanger really needs to do something about QC on these things! Are you sure you had juice in it needs to sit for a minute to saturate coil and wick. Takes longer with more VG Tam 1 Link to comment Share on other sites More sharing options...
fjs340 Posted January 27, 2014 Share Posted January 27, 2014 Yes Link to comment Share on other sites More sharing options...
fjs340 Posted January 31, 2014 Share Posted January 31, 2014 What is the procedure for dry burning a coil, can it extend the life of one? Link to comment Share on other sites More sharing options...
BirdDog Posted January 31, 2014 Share Posted January 31, 2014 What is the procedure for dry burning a coil, can it extend the life of one? Attached the coil to the battery. Hit button. No liquid involved. Short bursts recommended. Usually done to burn off residual liquid or water. Will it extend the life? Not really. You could also burn or break the coil while doing this. Tam 1 Link to comment Share on other sites More sharing options...
RobChase Posted February 7, 2014 Share Posted February 7, 2014 What is the procedure for dry burning a coil, can it extend the life of one? I did a dry burn with my aspire coil. It really didn't help. I just threw it in the trash and put a new coil in. I found that these coils work better if you let them suck up the juice for 5 to 10 minutes before taking a hit. Link to comment Share on other sites More sharing options...
Joshuab3687 Posted February 7, 2014 Share Posted February 7, 2014 You have to be careful when dry burning. You can sometimes ruin the coil if you hold the button too long. Also can burn up the rubber isolator (grommet) at the base near the pin and get a burnt rubber taste. Link to comment Share on other sites More sharing options...
Bebop Posted February 7, 2014 Share Posted February 7, 2014 Youtube the dry burn for some good visuals. You can definitely extend the life of a coil. 2 biggest errors i made in dry burning is too much voltage for too long causing coil failure or not doing the pulse burn enough times to make it effective. The wick must be dry! When the coil glows red evenly and it is no longer producing any vapor and the wick turns white you are good to go. You can only do it a couple times because the wick does deteriorate and eventually loses its ability to wick well. Hope that helps Tam 1 Link to comment Share on other sites More sharing options...
Arterial Puncture Posted February 9, 2014 Share Posted February 9, 2014 (edited) I see so many complaints about Kanger coils and descriptions of "tasting burned". It seems like it is 1.8 ohm coils and makes me wonder if it is folks using variable voltage / wattage batteries and hitting them with too much amperage? The low resistance heats up so quickly if the wick is not saturated really well or the button held too long the 'juice' is gone in no time - or so it would seem. Admittedly I am only a two month vaper - and using the Kanger T3S, ProTank2 and Mini Protank2. The ProTanks are 'juice gobblers" and I have never had a dry hit which is fine by me. Great flavor and the vapor is good as well. The T3S - not as much of a "juice gobbler" on thicker juices as the Protanks - but it does really well with thinner juices and I have never had a dry issue with them either. Seepage is about equal and I have never pulled a "flavor wick" as suggested in some of the YouTube videos. I am either very lucky OR I don't know what a "dry burn taste: really tastes like. Perhaps so! Now watch. My next draw will be nasty and I'll be back crying. Dave Edited February 9, 2014 by Arterial Puncture Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now