iClear 16's with the iTaste vv

[DamCampers]

Help with iClear 16 and iTaste vv.

[DamCampers]

The same thing happens to me with one of my iClear 16's. It will only fire with the iClear 16 that tightens with a few extra turns towards the battery. If I use a different one, it turns and tightens normally. The odd one out of the pack seems to be the only one that fires and it's the one that requires a few extra turns. Which also makes the center pin have more pressure on it. So, if I lift the center pin, the others will work, but if I use the tank that will work even if the pin is pushed down just a tad bit, it works. So in summary.

The odd iClear 16 (one of them) works but needs to be tightened a few extra twists kinda like it has extra threading.

The others that I have won't fire (they don't touch the center pin) unless I pull up the center pin very lightly and then not put the odd tank on

Any solutions? If you understand this, plz let me know. If you don't, reply quick so I can explain it differently.

(I have an iTaste vv) and 5 iClear 16's

[Bebop]

You might be able to push or tap the center pin up in the iclear. It should be a press fit. You might have to adjust the gasket at the mouth piece as well.