Vispera Posted December 7, 2013 Share Posted December 7, 2013 I have a juice my wife loves from our local b&m and no matter what I put it in it burns ive used a kpt mini and a iclear 16 and some other clearos Link to comment Share on other sites More sharing options...
thvapor Posted December 7, 2013 Share Posted December 7, 2013 Switch out the wick with cotton in the kpt mini.. Link to comment Share on other sites More sharing options...
Tam Posted December 7, 2013 Share Posted December 7, 2013 Do you know what the PG/VG ratio is on the juice? It might be too thick to allow the wick to absorb it well. Link to comment Share on other sites More sharing options...
bcartervol98 Posted December 7, 2013 Share Posted December 7, 2013 Do you know what the PG/VG ratio is on the juice? It might be too thick to allow the wick to absorb it well. I think that is what is happening with my Fuzion flavors. When they stopped adding PG it is too thick. I want to dilute it but do not know how to. If I take a few draws without power then push the button it is good for a draw or two then the same thing. It is noticeably thicker than my other flavors and I am almost certain this is the issue for me. You might try priming the wick with a couple strong draws without pushing the button to soak the wick. It is a pain in the *** but has worked for me. Link to comment Share on other sites More sharing options...
Tam Posted December 7, 2013 Share Posted December 7, 2013 I think that is what is happening with my Fuzion flavors. When they stopped adding PG it is too thick. I want to dilute it but do not know how to. If I take a few draws without power then push the button it is good for a draw or two then the same thing. It is noticeably thicker than my other flavors and I am almost certain this is the issue for me. You might try priming the wick with a couple strong draws without pushing the button to soak the wick. It is a pain in the *** but has worked for me. If you don't have any PG available I've used a few drops of distilled water into the juice. It works to thin it out just fine. Try a little in a separate bottle so you can figure out if this works for you or not without wasting the whole bottle of juice though. Link to comment Share on other sites More sharing options...
Vispera Posted December 7, 2013 Author Share Posted December 7, 2013 Its 50/50 pg vg Link to comment Share on other sites More sharing options...
Tam Posted December 7, 2013 Share Posted December 7, 2013 Its 50/50 pg vg Okay, so it's probably not that. What ohm coil are you using? What kind of battery are you using? Is it variable voltage? We'll try the process of elimination to try to figure out what's causing this. Link to comment Share on other sites More sharing options...
Vispera Posted December 7, 2013 Author Share Posted December 7, 2013 Its just a reg 650 mah not vvvw and the coil its on now is a 1.8 iclear 16 Link to comment Share on other sites More sharing options...
Tam Posted December 7, 2013 Share Posted December 7, 2013 Maybe try a higher resistance coil like a 2.2 ohm? Link to comment Share on other sites More sharing options...
bcartervol98 Posted December 7, 2013 Share Posted December 7, 2013 If you don't have any PG available I've used a few drops of distilled water into the juice. It works to thin it out just fine. Try a little in a separate bottle so you can figure out if this works for you or not without wasting the whole bottle of juice though. I may order some unflavored PG in 18mg to add to it, just hoping it will not dilute the flavor too much. Link to comment Share on other sites More sharing options...
Tam Posted December 7, 2013 Share Posted December 7, 2013 I may order some unflavored PG in 18mg to add to it, just hoping it will not dilute the flavor too much. If you only use a drop or two I've found it doesn't dilute the flavor too much to notice. I tried adding PG to the last batch of OrangeZilla I got from Fuzion but it didn't help. Link to comment Share on other sites More sharing options...
Vispera Posted December 7, 2013 Author Share Posted December 7, 2013 (edited) Ok put 2.2 in kpt mini we'll see how it goes Edited December 7, 2013 by Vispera Link to comment Share on other sites More sharing options...
Tam Posted December 7, 2013 Share Posted December 7, 2013 Ok put 2.2 in kpt mini we'll see how it goes Let us know how it works out for you. Link to comment Share on other sites More sharing options...
Patricia Posted December 7, 2013 Share Posted December 7, 2013 I have noticed if I add a lot of my pure sweetener to any of my juices it causes the juice to get burnt and turn almost black. It shortens the life of my coils too. Link to comment Share on other sites More sharing options...
Patricia Posted December 7, 2013 Share Posted December 7, 2013 What is the deal with the Fusion juice? I have 2 bottles steeping, Endless summer and Unicorn Blood. I think I just got my usual 50/50 ratio. Is the ratio of PG and VG have something to do with the problem yall are having with your Fusion juice? Link to comment Share on other sites More sharing options...
Tam Posted December 7, 2013 Share Posted December 7, 2013 What is the deal with the Fusion juice? I have 2 bottles steeping, Endless summer and Unicorn Blood. I think I just got my usual 50/50 ratio. Is the ratio of PG and VG have something to do with the problem yall are having with your Fusion juice? From the first bottles that I bought from Fuzion, which were terrific, to the second, bigger bottle I ordered, they changed something so the juice just doesn't taste the same. I loved the way it tasted the first time around. The second bottle? Not so much. Since you've not had their juices before you might like it, though. Link to comment Share on other sites More sharing options...
spydre Posted December 7, 2013 Share Posted December 7, 2013 I would agree with Tam that it MAY be the resistance coils you are using. 1.8 ohms puts you 7.6 watts, since when your battery is fully charged, it will output at 3.7 volts, which COULD be too much for the juice you are using. That's why I stopped using 1.8's at all. Like Tam said, 2.2s would probably be best for your target range for taste with a standard, non variable voltage battery. That will put you at 6.2 watts, which is more "ideal" when you are just starting out, or when you are using the stick batteries, flavor wise. I had to play around with resistances when I sent my MVP back because of a problem before I found the sweet spot where I got the good flavor I was used to, and not get burned. Link to comment Share on other sites More sharing options...
Vispera Posted December 7, 2013 Author Share Posted December 7, 2013 Well 2.2 burnt too so maybe its something with the juice ill try and thin it out Link to comment Share on other sites More sharing options...
AlkiDweller Posted December 13, 2013 Share Posted December 13, 2013 You might try priming the wick with a couple strong draws without pushing the button to soak the wick. It is a pain in the *** but has worked for me. A pain? Not at all. You have just provided a solution that's been bugging me for a couple months. One of my favorite flavors tastes burnt after a short time even with a new coil. That was the pain. Was. Not a pain any more. Link to comment Share on other sites More sharing options...
Vispera Posted December 13, 2013 Author Share Posted December 13, 2013 I gave up on my wife's juice I just clean the tank every night we just won't be getting any more after this 30ml is gone Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now