Patricia Posted December 4, 2013 Share Posted December 4, 2013 I have started having that problem with there not being a good connection between the tank and the battery. I can fix it by pulling up the center post of the battery but I don't want to break a perfectly good battery when it is the tank that is the problem. I know this because it happens to every battery I put that tank on. My question is this, how can I fix the bottom of the tank instead of having to mess with my new batteries? I am gentle but I am afraid I will eventually break one of my new batteries trying to get the tank to work. Link to comment Share on other sites More sharing options...
GEFFiCART Posted December 4, 2013 Share Posted December 4, 2013 what battery are you putting on this KPT? Link to comment Share on other sites More sharing options...
Aquatroy Posted December 4, 2013 Share Posted December 4, 2013 Merlin say "a 1300 rainbow spinner " Patricia 1 Link to comment Share on other sites More sharing options...
Patricia Posted December 4, 2013 Author Share Posted December 4, 2013 Merlin say "a 1300 rainbow spinner " Now how did Merlin know that LOL Link to comment Share on other sites More sharing options...
Havamal Posted December 4, 2013 Share Posted December 4, 2013 That's why he is Merlin! Link to comment Share on other sites More sharing options...
Patricia Posted December 4, 2013 Author Share Posted December 4, 2013 I really don't want to hurt my new KPT 2 either but it IS the problem. Only the tank acts up, not the battery. All is brand new. I should not be having these problems. Link to comment Share on other sites More sharing options...
Jeffb Posted December 4, 2013 Share Posted December 4, 2013 All is brand new. I should not be having these problems. You've been around long enough to know this isnt true Patricia 1 Link to comment Share on other sites More sharing options...
Aquatroy Posted December 4, 2013 Share Posted December 4, 2013 I don't own spinners, but a handful of KPT 1,2,3s. Never had this issue with twists. The great and powerful TAM is a spinner/ KTP chick, I'd listen to her advice on this one.... Tam 1 Link to comment Share on other sites More sharing options...
Bebop Posted December 4, 2013 Share Posted December 4, 2013 Patricia The part in the tank that contacts the battery is the bottom end of the coil Sometimes if you tighten the tank to the battery too much it compacts the coil and presses it together too much. You can gently pull the bottom of the coil (doesn't take much). It's just a "press fit" with the body of the coil. It's easier if you remove the coil first. Link to comment Share on other sites More sharing options...
Patricia Posted December 4, 2013 Author Share Posted December 4, 2013 Remove the coil then pull down on the bottom part a little bit? Will it pull off? If so what do I do if it does? Link to comment Share on other sites More sharing options...
Bebop Posted December 4, 2013 Share Posted December 4, 2013 It will pull all the way out if you pull too hard. You dont need to pull it out very much. Just a bit. Almost imperceptable. Just gently and slowly. Not enough to separate it from the little white insulator ring that keeps the two pieces of metal from touching spydre 1 Link to comment Share on other sites More sharing options...
Tam Posted December 5, 2013 Share Posted December 5, 2013 Like Bebop says, rock the little end of the coil back and forth JUST A LITTLE at a time to pull it out a tiny bit. That's usually all you need, although when I experience that problem with my Spinners, I just gently pull the center post up. Been doing that forever now with never a problem as long as you don't pull the center post on the Spinner too far. Did that once and it came out still attached by the wires! I checked to make sure the wires were solidly attached and then carefully put the wires back in and pushed the center post down. No problem at all. Bebop and spydre 2 Link to comment Share on other sites More sharing options...
Patricia Posted December 5, 2013 Author Share Posted December 5, 2013 Thanks Tam. That pulling out completely is what I am afraid of but I have been doing it since you taught me how months ago and I have not killed a battery yet. Now that I know that if I do accidently pull it up too much I can put it back together I am not so scared. Tam 1 Link to comment Share on other sites More sharing options...
Tam Posted December 5, 2013 Share Posted December 5, 2013 Accidentally pulling it up too far only happened once and that was my fault. I got too impatient and pulled up too much all at once. Since then I've learned to pull up only a tiny bit at a time and it's been fine. You're good to go, Patricia. Aquatroy 1 Link to comment Share on other sites More sharing options...
Compenstine Posted December 5, 2013 Share Posted December 5, 2013 I have noticed the coil loosening up a bit in the base from doing refills, I check that first now before pulling the pin out a tad. Not sure why it happens but just another thing to check. Link to comment Share on other sites More sharing options...
bcartervol98 Posted December 5, 2013 Share Posted December 5, 2013 I have noticed the coil loosening up a bit in the base from doing refills, I check that first now before pulling the pin out a tad. Not sure why it happens but just another thing to check. The coils are the only thing in my vaping gear that I tighten as tight as i can get them. I was having this problem too and once I started tightening them more it fixed the issue. Link to comment Share on other sites More sharing options...
Bebop Posted December 5, 2013 Share Posted December 5, 2013 .....and the only thing I'll add to all this awesome advice is dont forget to clean all your threads as well. Remember it not only affects how the various pieces seat together but also affects electrical connection as well! Tam 1 Link to comment Share on other sites More sharing options...
Patricia Posted December 6, 2013 Author Share Posted December 6, 2013 Thanks you guys I have been noticing that too. One time when I pulled the bottom off the coil just stayed in the tank. So, tightening up the coil is what I need to do to fix the problem? Thank you. I can do that. Link to comment Share on other sites More sharing options...
spydre Posted December 6, 2013 Share Posted December 6, 2013 Patricia The part in the tank that contacts the battery is the bottom end of the coil Sometimes if you tighten the tank to the battery too much it compacts the coil and presses it together too much. You can gently pull the bottom of the coil (doesn't take much). It's just a "press fit" with the body of the coil. It's easier if you remove the coil first. Remove the coil then pull down on the bottom part a little bit? Will it pull off? If so what do I do if it does? What he said. You don't even have to remove the coil. And doesn't take much - you can do it gently with a pair of tweezers. Link to comment Share on other sites More sharing options...
spydre Posted December 6, 2013 Share Posted December 6, 2013 Oh dear, now that I've read this second page of posts...well, especially the first few, forgive me, but certain wording had dirty thoughts popping all over the place. Just FYI. Link to comment Share on other sites More sharing options...
HelloMiakoda Posted December 16, 2013 Share Posted December 16, 2013 (edited) I wish egos had a springy center post. They could call it an Ego Twist Bounce! That is a cute name. Edited December 16, 2013 by HelloMiakoda Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now