*Share Your Coil Builds*

[yeroc1982]

9 wraps of twisted 28g, coming in at 1.05ohm. It's awesome at 20watts!

[xCOXINATORx]

Diamond Coil on the Kayfun... I don't think it will work that well, but it looks good... haha

[Spyke_696]

[Spyke_696]

dual 28 gauge twisted kanthol .5 ohms in my tobh atty sitting on my nemesis

[Crazyavonlady]

My go to build. Dual parallel 26 guage 6 wraps on a 2 mm screwdriver.

[Mtdobies]

Nice! I need to order some 26g.

Kinda looking at different type of wire now.

[Garrett1234567]

Duel parallel 28g kanthal

Wicked up

Ohm at .33

Chuckin clouds

[Garrett1234567]

Here's one I did last night, duel parallel mustache with 28g, .36 ohms

[Mtdobies]

Wow

[Raptor Vaper]

Loving this duquit box mod. It hits so hard and has such low voltage drop that all it needs is a single coil. I put a parallel 24 gauge coil in it. Macro coil. Jeeeez

[Mr Smith]

my first attempt at a dual coil build in the KFL+

picture kinda sucks but I was more anxious to try it than to take pics of it.

I believe it was about 9.5 wraps each. 32G wire, the pair came out to 1.2ohm (minimum my vamo will fire)

[Raptor Vaper]

Dual parallel coil 24 gauge 5 wraps. Didn't test on the ohm reader but what an awesome build!

[christov11]

Just found my dripping flavor!!! And new build is sweet

[rjc3095]

Ok so what is the difference between the loosely wrapped coils and the tightly wrapped coils vapor and taste wise?

[christov11]

Ok so what is the difference between the loosely wrapped coils and the tightly wrapped coils vapor and taste wise?

I would love to tell you but I can't seem to get mine to stick together... Logically thinking. Loose wraps must heat up more of the wick therefore more of the juice all the while giving more airflow but then again... I'm not experienced enough yet, only using logic

[rjc3095]

I would love to tell you but I can't seem to get mine to stick together... Logically thinking. Loose wraps must heat up more of the wick therefore more of the juice all the while giving more airflow but then again... I'm not experienced enough yet, only using logic

Sounds logical lol

[christov11]

I know it's not a build but it's building time!!! Haha

Now it's coming together...

BOOM!!

Picture heavy but wtv I had fun haha

[Mr Smith]

first sub ohm build since I finally got around to buying a mechanical mod (magneto)

0.8ohm with 32g 5.5 wraps on bottom, 5 wraps on top; dual coil.

and the mod firing it:

Edited August 29, 2014 by Mr Smith

[Raptor Vaper]

So far my best dual parallel in my mutation X. Can't get the coils quite as clean as in my plume veil but they are close close close! Sitting on top of my dual 18650 unregulated duquit box mod, made from kamagong wood. Two Sony vtc-5 batteries.

4 wraps (8/7 with a parallel). Heats up instantly so hot you can't look at it. Chucks the vapor. Let me get a shot of that

Edited September 2, 2014 by Raptor Vaper

[mvince201]

Did somebody say something about chucking vapor?

[Happy Vapor]

first sub ohm build since I finally got around to buying a mechanical mod (magneto)

0.8ohm with 32g 5.5 wraps on bottom, 5 wraps on top; dual coil.

and the mod firing it:

Looks like a kayfun. I've never seen dual coils on one. Getting my *** out of bed. I've got to try this. Thank you.

[Dasfriek]

My favorite KFL build is a dual coil side be side single strand of 30 gauge wrapped 7 times.

Positioned with the air hole blowing between the coils

I have to rebuild it today so I'll try and get a pic if my phone will do the job.coils.

[christov11]

Just built this and I'm gonna test her out...

7 wrap 28g @ 0.51ohms

She chucks! I was outside and even with the wind it was solid!!! Need some water!

Can't wait to try it indoors... Wife might not be a fan lolll

Edited September 2, 2014 by christov11

[christov11]

Dual parallel 28g at 0.49ohm

[Raptor Vaper]

Dual parallel 28g at 0.49ohm

Trooper! I've got to where I cannot stand using 28 ga. Maybe its the kanthal I buy but I find it impossible to work with. Even after torching it its super springy