*Share Your Coil Builds*

[Raptor Vaper]

Nemesis brass mod, with magnetic and contact upgrade from fat daddy vapes. Caterpillar rda built to 1.35 ohms. 9 wraps, 28 gauge kanthal, dual coil.

Couldn't get the whole cloud in the shot

Little better

Whoo hoo. There we go

[mvince201]

Fresh build before I hit the sack. Goodnight and vape on!

[trickydick666]

.4 ohms 26g kanthal igo-w on panzer

[DragonGunner]

Another double barrel build in my Russian. I made a mistake and it ohm'd out at .5 so I got rid of it immediately, but it was a much cleaner build. I must admit though this one produced a ton of vapor.

[Bushwick]

Check out dragon filling this thread up. Nice builds, bud. Looks like you are having a good time with your Russian.

[DragonGunner]

Thanks Bushwick. I'm finding that the double barrel build at .8 is a pretty good sweet spot for my Russian.

[Bushwick]

That's what it's all about. Finding your build. I don't post here much because I am pretty content with my single 7 wrap parallel. It hits the spot.

[DragonGunner]

I'm still trying to perfect that parallel coil. I did one once or twice and it was great. Using 26/28 ga kanthal in my Russian makes the coils very long...almost too long for the Russian deck. I'll try again as soon as I get rid of my current builds.

[Raptor Vaper]

Nice and hot build for my morning coffee flavor e-juice. 28 gauge 14 wrap around the smallest dowel on my Kk vapetek coil jig. .76 ohms, nice, hot vape. OK vapor production.

Straightened coils out and wicked

Vapor

Sorry for looking rough guys, just woke up and about to get a shower and head to work! Lol, you guys are lucky I put on a shirt and pants....

Almost ready for the day now...

Everything that I take is laid out. And I added a nice hit from a vertical microcoil in my aerotank. Much better than the stock coils!!

My tools! Coil jig with the 3 dowels laid out, super sharp wire cutters, scissors, a double ended (flat and Phillips) screwdriver, ceramic pointed tip tweezers and my ohms reader!

Time for a nice 8 hour work day [emoji106]

Edited July 25, 2014 by Raptor Vaper

[Mtdobies]

Have a good day!

[Raptor Vaper]

Have a good day!

You as well buddy!

[crush02342002]

32g triple twist

[crush02342002]

.2ohm duel build vid

<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf" flashvars="file=http%3A%2F%2Fvid264.photobucket.com%2Falbums%2Fii164%2Fcrush02342002%2F022_zps7c74cc5e.mp4&title=">

[Raptor Vaper]

New build guys lol

I need a life

Holy sheet! .15 ohm build. Lordy lordy it glows bright! 24ga 5 wrap sleeper coil (one continuous wire)

Macro coil

Hang on let me wick it and vape her

The weather forecast predicts a lot of cloud cover tonight!

Lol! This is a 2 second puller!

Edited July 27, 2014 by Raptor Vaper

[Mtdobies]

Having a little bit of fun? ^^^

[Raptor Vaper]

Having a little bit of fun? ^^^

A little too much fun, and I may have had too much to drink looking back on that. But hey I build some hella good coils when I'm drunk

[Mtdobies]

Haha, as long as your being safe why not?[emoji4]

[Raptor Vaper]

Haha, as long as your being safe why not?[emoji4]

I also build safe. I know my batteries limits and I will not blow up a battery in my face. That's not worth it just to blow some clouds haha

[Mtdobies]

Nope its not worth it.

[grailhunter78]

Finally built first double 24 gauge coil. I am very happy with how much easier it is to use. .25 ohms

[Raptor Vaper]

Finally built first double 24 gauge coil. I am very happy with how much easier it is to use. .25 ohms

Nice! Did you build it with one continuous wire? That's the only way I can get a dual 24 gauge coil to fit in my caterpillar RDA

[grailhunter78]

Nice! Did you build it with one continuous wire? That's the only way I can get a dual 24 gauge coil to fit in my caterpillar RDA

No its two separate coils. Its a stillaire clone by cigreen. Its actually got some pretty big post holes in it.

[charles vapor]

^{So, I have this problem where I build a good coil and continuously think I can make one that out performs the previous, but then it ends up not being as good and then I can't seem to build the one that was really good anymore lol. lately I have been using dual 26 guage on my nimbus, nothing fancy, but seems to be my most consistant build. I read through these and see all kinds of different stuff (all of which I have tried). Long story shortened, I havent built anything with 24 guage or lower, is it worth a try or should I stick with the hundreds of feet of 28 and 26 guage I have.}

^{edit: additionally: what have you guys noticed as far as how the height of the coil from the base effects the build? is it best to keep it as close to level with the air holes as possible, or low to the base?}

Edited July 28, 2014 by charles vapor

[mvince201]

I've found that positioning the coil barely above the air hole works best.

[grailhunter78]

^{So, I have this problem where I build a good coil and continuously think I can make one that out performs the previous, but then it ends up not being as good and then I can't seem to build the one that was really good anymore lol. lately I have been using dual 26 guage on my nimbus, nothing fancy, but seems to be my most consistant build. I read through these and see all kinds of different stuff (all of which I have tried). Long story shortened, I havent built anything with 24 guage or lower, is it worth a try or should I stick with the hundreds of feet of 28 and 26 guage I have.}

^{edit: additionally: what have you guys noticed as far as how the height of the coil from the base effects the build? is it best to keep it as close to level with the air holes as possible, or low to the base?}

Personally I have found 24 to be the easiest to work with. I would suggest you try it. Honestly i dont think I will go back to the higher cage wires.