Bushwick Posted August 2, 2015 Share Posted August 2, 2015 I watched a lot of tutorials as well its just doing it by hand i cant get the wrap wire tight enough on the core.You've been using wire gauges that are a bit too close. That's why your wraps don't come out super close together. The smaller the wire you use for the outer portion, the better it will look. For example, 24 and 32ga is a good combo. Not 24 and 26/28. I used to rock 24/28 but then I started using 30 in place of the 28 and I started to notice that it looks better. I will never understand these industry build-kings using 45ga on 26ga cores, though. That's ludicrous. Link to comment Share on other sites More sharing options...
shen_long86 Posted August 2, 2015 Share Posted August 2, 2015 Right on thanks for the advice bushwick...im currently waiting on a shipment of 550ft of assorted guage wire. Link to comment Share on other sites More sharing options...
Killer Posted November 6, 2015 Share Posted November 6, 2015 My go to coil build is 1 strand 26g and 1 strand 28g twisted kanthal 6 wraps on 2.0mm. .38ohms with dual coils. It's on an 18650 box mod and a infinite clt atomizer. Great flavor and big clouds. I personally like it better than even clapton coils. Link to comment Share on other sites More sharing options...
Killer Posted November 7, 2015 Share Posted November 7, 2015 Link to comment Share on other sites More sharing options...
shen_long86 Posted November 28, 2015 Share Posted November 28, 2015 Got bored and started building. This buuld barely fit in my troll. Quad 22g 10 wrap on 5/64 screwdriver. 0.10 ohms and hits like a freight train, just too hot for my liking. Bebop 1 Link to comment Share on other sites More sharing options...
VaporTron Posted December 7, 2015 Share Posted December 7, 2015 Created these two monsters today. I dont have an ohm reader/check but use a multimeter. It only goes to 0.0 not 0.00 so i dont know the exact ohms (i.e. only know 0.6 ohms instead of 0.63 or w/e) Stove top is 24g kanthal and fires at 0.6~ Parallel is 24 g kanthal firing at 0.4~ Boy howdy does that stove top drink the juice! Can't wait til i get my mutilator tomorrow! Link to comment Share on other sites More sharing options...
VaporTron Posted December 8, 2015 Share Posted December 8, 2015 Got one more, My mutilator came in! Dual 24g coil firing at .3 ohms (+/-) Link to comment Share on other sites More sharing options...
VaporTron Posted December 10, 2015 Share Posted December 10, 2015 So i made this clapton coil and it is alright 1.0 and i think i found my sweet spot. Also have this 1.0 dual coil and they are both just warm and cloudy enough for me. Clapton is cool but not that impressive. Better than the stove top tho Anybody else in the one ohm zone? Link to comment Share on other sites More sharing options...
3Rutez Posted January 17, 2016 Author Share Posted January 17, 2016 Haven't been on for quote some time. Good to see the thread still going. I'm managing a vape bar now, and have plenty of time to build and see all the new crazy builds. Here is a pic of a recent build. A monster 20g core Clapton'd with 26g Kanthal, parallel with 20g. This was a b*tch to fit in almost any RDA, but ended up finding a home in a DOT with glass top cap. Crazy flavor. Link to comment Share on other sites More sharing options...
Bebop Posted January 17, 2016 Share Posted January 17, 2016 That looks like it would heat my house... Good to see you roots. Link to comment Share on other sites More sharing options...
Compenstine Posted January 17, 2016 Share Posted January 17, 2016 Nice Build! Good to see you post. Link to comment Share on other sites More sharing options...
3Rutez Posted January 17, 2016 Author Share Posted January 17, 2016 Thanks guys. Good to be back. 😆😤💨💨 Link to comment Share on other sites More sharing options...
freshlookimages Posted January 29, 2016 Share Posted January 29, 2016 Dual fused Clapton. 28 gauge nichrome x2/ 32 gauge nichrome outer. Wrapped around 2.5mm Stanley screwdriver. Came out to .19 ohms on the velocity Rixter and clouded66 2 Link to comment Share on other sites More sharing options...
clouded66 Posted March 27, 2016 Share Posted March 27, 2016 (edited) dual parallel 4 wrap Static wire, around 3mm drill bit, ohms out at around .08 so its a pretty low comp build and a nice warm vape running it on a copper Kennedy RDA and a Jux mod. Edited March 27, 2016 by clouded66 mistyped word Link to comment Share on other sites More sharing options...
hitti2 Posted May 28, 2016 Share Posted May 28, 2016 My second build. First was twisted kanthal 26g. Twisted kanthal a1 24g, 6 wraps 2.5mm. .17ohm 3.06v 55w. RX200/griffin 25mm Sent from XT1575, Stock 6.0 MM, Systemless root Link to comment Share on other sites More sharing options...
Walt Posted February 16, 2017 Share Posted February 16, 2017 First Clapton build. smacksy 1 Link to comment Share on other sites More sharing options...
Edna Posted February 16, 2017 Share Posted February 16, 2017 Looking good @Walt Link to comment Share on other sites More sharing options...
Walt Posted February 16, 2017 Share Posted February 16, 2017 48 minutes ago, Edna said: Looking good Tanks!!!! Bebop and Edna 2 Link to comment Share on other sites More sharing options...
Adversarious1 Posted February 21, 2017 Share Posted February 21, 2017 Still one of my main "go to" dual coil builds: Twisted 316L SS helixed with 32g SS. Measures out right at .15 ohms. This build is in my Twisted Messes V2. Edna, Walt and smacksy 3 Link to comment Share on other sites More sharing options...
DWrainbowvaper36 Posted February 21, 2017 Share Posted February 21, 2017 One is a 7 wrap with 28 gauge kanthal and the other is a 7 wrap with twisted 28 gauge kanthal. Sent from my SC-1010JBBT using The Vapor Talk mobile app Link to comment Share on other sites More sharing options...
Rixter Posted March 11, 2017 Share Posted March 11, 2017 Nothing fancy...just a single ribbon-core Clapton metering .43Ω in my Goon RDA. smacksy 1 Link to comment Share on other sites More sharing options...
cany Posted March 11, 2017 Share Posted March 11, 2017 (edited) I have some SS fused Clapton ss316l 26*2 30 Ga I dont build a lot and Dunno why I bought it My build decks are a Mutation X4 and the Herakles RTA 2 Looking for a nice build with this wire Off topic a bit lol Edited March 11, 2017 by cany Link to comment Share on other sites More sharing options...
cany Posted March 12, 2017 Share Posted March 12, 2017 22 hours ago, cany said: I have some SS fused Clapton ss316l 26*2 30 Ga I dont build a lot and Dunno why I bought it My build decks are a Mutation X4 and the Herakles RTA 2 Looking for a nice build with this wire Off topic a bit lol I was told this wire takes a while too ramp up and was no good for a Dripper build Link to comment Share on other sites More sharing options...
shen_long86 Posted March 13, 2017 Share Posted March 13, 2017 Rocking a fused clapton in the hadaly rda at 40w and flavor for days!Sent from my SAMSUNG-SM-G935A using Tapatalk Link to comment Share on other sites More sharing options...
james.darlin Posted March 16, 2017 Share Posted March 16, 2017 These are the product of my rebuild Thursday this week Sent from my iPhone using Tapatalk Adversarious1, Walt and Rixter 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now