Adversarious1 Posted April 9, 2015 Share Posted April 9, 2015 This isn't anything fancy...but it's my first build and I wanted to share. Standard dual coil build. 26ga Kanthal. I was aiming for .5 ohm, it clocked in at .48 on the ohm meter. It fired exactly as I hoped it would...nice and even from the inside out. And it definitely cranks out the vapor... Link to comment Share on other sites More sharing options...
gag8tor Posted April 9, 2015 Share Posted April 9, 2015 Very nice. What are you building on? Link to comment Share on other sites More sharing options...
Adversarious1 Posted April 9, 2015 Share Posted April 9, 2015 Mutation X v3. Just picked it up today. Link to comment Share on other sites More sharing options...
Tug Posted April 9, 2015 Share Posted April 9, 2015 Looks good,doesn't have to look pretty as long as it works Adversarious1 1 Link to comment Share on other sites More sharing options...
Mirage Posted April 9, 2015 Share Posted April 9, 2015 I do the same thing shin does. Five minutes at the most and it's good to go...Single, duel or quad... Now that I found a new way of wicking, it might be ten minutes max... I can deal with that... Link to comment Share on other sites More sharing options...
DragonGunner Posted April 9, 2015 Share Posted April 9, 2015 Lately I've found my wicking takes much more time than wrapping, and installing coils. At times it gets to the point where I find myself nipping single strands of wick. Talk about overkill and a headache. But no dry hits is definitely a pay off. GeorgeF and jasonculp 2 Link to comment Share on other sites More sharing options...
Drew661 Posted April 9, 2015 Share Posted April 9, 2015 Now that I found a new way of wicking, it might be ten minutes max... I can deal with that... What might that be sir? Pics? Link to comment Share on other sites More sharing options...
EverPresentNoob Posted April 10, 2015 Share Posted April 10, 2015 What might that be sir? Pics? Im guessing the way DragonGunner posted in the SubTank thread... Link to comment Share on other sites More sharing options...
Mirage Posted April 10, 2015 Share Posted April 10, 2015 ^^^Yep^^^ Link to comment Share on other sites More sharing options...
Trey921 Posted April 14, 2015 Share Posted April 14, 2015 This is a Fuzed Clapton Build, I used two 26 gauge kanthal wires and wrapped them with a 30 gauge kanthal wire. By wrapping them super tight I Fuzed the 2 26 gauge wires together creating a larger wire with less resistance. This build fires at .13 ohms and chucks clouds and flavor. All of this was done on a Swirlfish rebuildable deck. Link to comment Share on other sites More sharing options...
EverPresentNoob Posted April 14, 2015 Share Posted April 14, 2015 Question about that last coil.. if you moved the positive wires tot he opposit holes couldnt you center the coils a bit more in the deck for better airflow across the coils? Link to comment Share on other sites More sharing options...
jasonculp Posted April 15, 2015 Share Posted April 15, 2015 Question about that last coil.. if you moved the positive wires tot he opposit holes couldnt you center the coils a bit more in the deck for better airflow across the coils? That depends on your RDA. I build on a TOBH and the placement of the airholes when wide open are not centered, so you have to build towards the side. It all depends on your setup. IMO you are correct that you want the coil in the path of the airflow coming in. Link to comment Share on other sites More sharing options...
EverPresentNoob Posted April 15, 2015 Share Posted April 15, 2015 Ah. Makes sense. Thanks. Link to comment Share on other sites More sharing options...
GeorgeF Posted April 20, 2015 Share Posted April 20, 2015 This is my Tugboat v1 with twisted 28 gauge 7 wrap .67 ohms. Tug and jasonculp 2 Link to comment Share on other sites More sharing options...
NewDrip Posted April 20, 2015 Share Posted April 20, 2015 (edited) I've been doing a lot of coil builds lately, figured I'd share this one. Dual Staggered Fused Clapton .2 ohm Build. 28g 317L core, wrapped with 32g kanthal, fused with 28g kanthal, wrapped on a 2mm screwdriver, built on 28mm Tobh Atty. Another awesome build I did in a Goblin tank. This thing hits like a dripper. It's Dual Claptons .2 ohms, 28g kanthal core wrapped with 32g kanthal with on a 1mm coil jig. Edited April 20, 2015 by NewDrip Adversarious1, vaping_jake and Tug 3 Link to comment Share on other sites More sharing options...
Adversarious1 Posted April 20, 2015 Share Posted April 20, 2015 Nice looking builds. I just ordered a bunch of kanthal (26, 28, 30 & 32g). I've been wanting to try a dual Clapton but have been putting it off. Think I just found my motivation. NewDrip 1 Link to comment Share on other sites More sharing options...
chrisfriar14 Posted April 20, 2015 Share Posted April 20, 2015 Only new to dripping this week but here's a few builds I've done Simple dual Dual parallel Quad coil build And my latest is the dual nano dragon. Forgot to take a picture before I wicked it but you can see the ends poking out. And in my opinion chucks decent clouds Tug and NewDrip 2 Link to comment Share on other sites More sharing options...
NewDrip Posted April 20, 2015 Share Posted April 20, 2015 (edited) Nice work for a noob. If you hadn't said I would have thought that you been doing this for a while. Edited April 20, 2015 by NewDrip chrisfriar14 1 Link to comment Share on other sites More sharing options...
chrisfriar14 Posted April 20, 2015 Share Posted April 20, 2015 Nice work for a noob. If you hadn't said I would have thought that you been doing this for a while. Thanks its starting to become a bit of a hobby NewDrip 1 Link to comment Share on other sites More sharing options...
vaping_jake Posted April 21, 2015 Share Posted April 21, 2015 I agree, definitely some talent there...extremely clean looking coils. chrisfriar14 1 Link to comment Share on other sites More sharing options...
chrisfriar14 Posted April 21, 2015 Share Posted April 21, 2015 I agree, definitely some talent there...extremely clean looking coils. Thanks its mainly just been watching YouTube videos and going from there as nobody else I know is into dripping so had no one to get advice from thats why I joined this forum NewDrip 1 Link to comment Share on other sites More sharing options...
Mirage Posted April 21, 2015 Share Posted April 21, 2015 (edited) I'm glad your here Chrisfriar. Clean builds are the way to go!!! But damn, isn't it so very easy???...lol Maybe it's just that I have a background twisting wire... Edited April 21, 2015 by Mirage Link to comment Share on other sites More sharing options...
shen_long86 Posted April 21, 2015 Share Posted April 21, 2015 Sleeper coil build on darkhorse rda clone. 28g kanthal wrapped 9 times on a 3/32 screwdriver @0.8 ohms. Not the cleanest build in the world but hey it chucks it. Link to comment Share on other sites More sharing options...
chrisfriar14 Posted April 21, 2015 Share Posted April 21, 2015 I'm glad your here Chrisfriar. Clean builds are the way to go!!! But damn, isn't it so very easy???...lol Maybe it's just that I have a background twisting wire... No your right its definitely a lot easier than I was expecting. When watching videos and doing my research on builds I was wondering what I was getting into with all these different terms and gauges of wire but when it came to it I was surprised how simple it actually was. Link to comment Share on other sites More sharing options...
NewDrip Posted April 26, 2015 Share Posted April 26, 2015 (edited) Staggered Parallel Claptons, staged heating @ .2 ohms. YouTube video of this firing Edited April 26, 2015 by NewDrip vaping_jake 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now