shen_long86 Posted March 16, 2015 Share Posted March 16, 2015 Thx gag8tor Link to comment Share on other sites More sharing options...
GeorgeF Posted March 16, 2015 Share Posted March 16, 2015 Thanks gag8tor Link to comment Share on other sites More sharing options...
shen_long86 Posted March 18, 2015 Share Posted March 18, 2015 Decided to switch it up for a while... this is dual nano dragon coils with 14 wraps of 26ga kanthal @0.5 ohms for the ipv. Same setup in the cartel, with 12 wraps of 26ga kanthal coming in @0.44 ohms for the mech mod. I must say now that i have given dragon coils another shot they are freaking awesome, might even do a set of macro dragons in the cartel when these burn out..[emoji16] Link to comment Share on other sites More sharing options...
vaping_jake Posted March 19, 2015 Share Posted March 19, 2015 ya they seem to produce lots of vapor with minimum air flow .... in theory they shouldn't work but they seem to kick butt i assume the coil is so wicked up it keeps the coil cool Link to comment Share on other sites More sharing options...
shen_long86 Posted March 19, 2015 Share Posted March 19, 2015 Yea jake i want to say that is really the only way they work. Link to comment Share on other sites More sharing options...
jasonculp Posted March 21, 2015 Share Posted March 21, 2015 Tonights build: 26ga/.9 Tiger Wire 3.2mm ID .5ohms Compenstine, Tug and vaping_jake 3 Link to comment Share on other sites More sharing options...
Tug Posted March 21, 2015 Share Posted March 21, 2015 That is one sexy lookin coil,Jason. Link to comment Share on other sites More sharing options...
jasonculp Posted March 21, 2015 Share Posted March 21, 2015 Thank you! I wish I would have added a couple more wraps on it. I am liking it so far. At 30 watts my juice lost it's flavor. I went down to 20 and it was better. At 15 it had all of it's flavor. I was hoping the added surface area of this larger wire would add a bit more flavor, but the coil I had on it was much smaller tiger wire, but higher ohm...so my surface area probably didn't change much. Link to comment Share on other sites More sharing options...
Compenstine Posted March 21, 2015 Share Posted March 21, 2015 Nice looking coil Jason! Link to comment Share on other sites More sharing options...
Tug Posted March 21, 2015 Share Posted March 21, 2015 I really want to get the Subtank mini for the RBA.I wish the Nano had one but that would probably be a nightmare to build on lol Link to comment Share on other sites More sharing options...
jasonculp Posted March 21, 2015 Share Posted March 21, 2015 (edited) Nice looking coil Jason! Thank you! The tiger wire takes a little more patience than regular wire. You can have a beautiful looking coil and dryburn it once and it uncoils! I have tried annealing them with a torch first and it helps, but it takes a lot of adjusting once you get it on. But it is totally worth it! I really want to get the Subtank mini for the RBA.I wish the Nano had one but that would probably be a nightmare to build on lol The thing is pretty little, but it is idiot proof. I am proof of that. I never could get anything to wick correctly, but after a little reading I don't get any dry hits or spitting/flooding. Of course I am only running it at 15 watts. I am not trying to chase clouds. It is just vaping like a better tasting OCC coil. Edited March 21, 2015 by jasonculp Link to comment Share on other sites More sharing options...
Compenstine Posted March 21, 2015 Share Posted March 21, 2015 Yes that is true, but once you get it set, it IMO is the best flavor coil I have ever used. Link to comment Share on other sites More sharing options...
jasonculp Posted March 21, 2015 Share Posted March 21, 2015 Yes that is true, but once you get it set, it IMO is the best flavor coil I have ever used. I totally agree! It is a bit more trouble, but well worth the extra effort! Link to comment Share on other sites More sharing options...
Tug Posted March 21, 2015 Share Posted March 21, 2015 I had that Orchid that I sent to Earthling.The first day I had it I built it dual micros at 0.5 ohms and I was shocked I wicked it perfect the first time. Link to comment Share on other sites More sharing options...
jasonculp Posted March 21, 2015 Share Posted March 21, 2015 When I had a Billow, it didn't wick that great. I know a lot more now than I did then and could probably make it work. I really think at this point I like the single coil, lower power stuff for my daily vape. This SubTank mini, with my juice 15 watts seems to be the sweet spot. It is funny it really does not seem to matter what ohm coil I run. Link to comment Share on other sites More sharing options...
vaping_jake Posted March 23, 2015 Share Posted March 23, 2015 twisted 24g 8 wraps at 0.275 ohms Mplough 1 Link to comment Share on other sites More sharing options...
shen_long86 Posted March 23, 2015 Share Posted March 23, 2015 Nice coil there jake...wish i could try some twisted wire but dont have a means/time to make it. Link to comment Share on other sites More sharing options...
jasonculp Posted March 23, 2015 Share Posted March 23, 2015 twisted 24g 8 wraps at 0.275 ohms Looks great! Link to comment Share on other sites More sharing options...
Compenstine Posted March 23, 2015 Share Posted March 23, 2015 Nice build! Just thought I would share some images of the twists I did for Jason. This is for those that are twisting wire and thinking of doing some twisted wires. ^^ 24ga .5 Flat 24ga .9 Flat 22ga .5 Flat 22ga .9 ^^ ^^ 28ga .9 Flat 28ga .5 Flat 26ga .5 Flat 26ga .9 ^^ ^^ 32ga .9 Flat 32ga .5 Flat 30ga .9 Flat 30ga .5 ^^ ^^ 4 x 32ga, 1 x .09 flat, 4 x 32ga 1x .9 flat, 2 x .9 flat ^^ The next time I do the 2 x .9 twist I will stop before it knots up. vaping_jake, jasonculp and tazl37 3 Link to comment Share on other sites More sharing options...
vaping_jake Posted March 26, 2015 Share Posted March 26, 2015 (edited) first vertical build. 24 g 5/6 wrap on an orion rda. not the easiest rda to build on. It is one thirsty build, eats juice like its oxygen. this one is before i cleaned up the wrap this is cleaned and wic'ed and working amazing Edited March 26, 2015 by vaping_jake Link to comment Share on other sites More sharing options...
Rixter Posted March 28, 2015 Share Posted March 28, 2015 Here's my Smok Dripper RDA with a vertical .7Ω 26g Kanthal A1 2.5mm 9/8 coil and JOC wick. I vape on this rig all day, every day at work. jasonculp 1 Link to comment Share on other sites More sharing options...
Trey921 Posted March 28, 2015 Share Posted March 28, 2015 My "sleeper" Clapton single wire build.. I used a 24 gauge core with a 28 gauge wrap. She fires at .19 ohms and rips like a champ. Flavor is ver good as well. This isn't a dual parallel build if you look closely you can see I build one coil then stuck the wire through the center post and built the other coil on the other side with the same wire. It was a pain to do put it looks awesome and chucks vape like no other lol Link to comment Share on other sites More sharing options...
vaping_jake Posted March 28, 2015 Share Posted March 28, 2015 rixter; very nice; is the top of the coil lead wrapped under the screw head or did you bring it back down to the hole? Link to comment Share on other sites More sharing options...
Trey921 Posted March 28, 2015 Share Posted March 28, 2015 I wrapped the first coil leaving like 5 inches of wire on one end then put the long end of the wire through the center post the wrapped the other coil on the other side with the extra wire from the first coil and put it through the last post. This whole this is 1 wire through all three post lol it was really hard to do Link to comment Share on other sites More sharing options...
Trey921 Posted March 28, 2015 Share Posted March 28, 2015 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now