Tug Posted February 26, 2015 Share Posted February 26, 2015 I gotcha,Rixter. Link to comment Share on other sites More sharing options...
Rixter Posted March 6, 2015 Share Posted March 6, 2015 Here's the dual-coil setup on my Veritas RBA. I used a 2.5mm Kuro Coiler clone from SlowTech to wrap two 26g Kanthal A-1 9/8 1Ω coils. Link to comment Share on other sites More sharing options...
Drew661 Posted March 8, 2015 Share Posted March 8, 2015 22 gauge at .2 ohm Just like a freight train. Lol. No way I can vape this for more than a few minutes. Great flavor though Link to comment Share on other sites More sharing options...
vaping_jake Posted March 14, 2015 Share Posted March 14, 2015 24 guage 7 wraps 0.3 ohms has a small delay to it but i like the setup so far. Im gonna try doing it in parallel next Link to comment Share on other sites More sharing options...
gag8tor Posted March 14, 2015 Share Posted March 14, 2015 First build for me on my Freakshow. 1.1 ohms 28 gauge 8 wraps with Japanese cotton. Wicking looks kinda ugly and I probably used too much. It was a little tight at first but now it's cruizin'. Link to comment Share on other sites More sharing options...
gag8tor Posted March 14, 2015 Share Posted March 14, 2015 That's pretty sweet Jake. Link to comment Share on other sites More sharing options...
Tug Posted March 14, 2015 Share Posted March 14, 2015 (edited) scorpion coil I built last night Edited March 14, 2015 by TugBoat vaping_jake, gag8tor, jasonculp and 3 others 6 Link to comment Share on other sites More sharing options...
Rixter Posted March 15, 2015 Share Posted March 15, 2015 scorpion coil I built last night Is that a Tugboat RDA, and do the air-holes line up with the coils fairly well? Link to comment Share on other sites More sharing options...
Tug Posted March 15, 2015 Share Posted March 15, 2015 No Rix,it's a Stillare clone and surprisingly the air holes line up just fine.I really like this coil.The air holes are the cyclops type holes I've got it wide open on both ends Link to comment Share on other sites More sharing options...
vaping_jake Posted March 15, 2015 Share Posted March 15, 2015 Tugboat; do you run a scorpion coil on both sides or just as you have it pictured? Im trying to build one on with 26g but i always ruin it trying to get the tail twisted tighter. Link to comment Share on other sites More sharing options...
Tug Posted March 15, 2015 Share Posted March 15, 2015 Just one and the trick to twisting it is put both coils on your drill bit and voilà be sure and heat treaty too, it takes the springy out Link to comment Share on other sites More sharing options...
Compenstine Posted March 15, 2015 Share Posted March 15, 2015 @Jake one way to do it by hand with pliers is to wrap it like this: Then grab the loop and twist it together. Vapor Guy 1 Link to comment Share on other sites More sharing options...
vaping_jake Posted March 16, 2015 Share Posted March 16, 2015 thanks comp, my problem is i keep twisting trying to get it real tight, i know there is no reason too but i cant help myself lol once i get my 26650 rda i will try a lower guage Link to comment Share on other sites More sharing options...
Compenstine Posted March 16, 2015 Share Posted March 16, 2015 This is as tight as can get with a hand twist 26ga: vaping_jake 1 Link to comment Share on other sites More sharing options...
GeorgeF Posted March 16, 2015 Share Posted March 16, 2015 Tugboat v1.2 / 25ga., 10 wrap dual coil, .5 ohm. Here it is wicked up. vaping_jake 1 Link to comment Share on other sites More sharing options...
Tug Posted March 16, 2015 Share Posted March 16, 2015 Damn George,those are spiffy lookin coils there bud! GeorgeF 1 Link to comment Share on other sites More sharing options...
GeorgeF Posted March 16, 2015 Share Posted March 16, 2015 Thanks. 25 ga. is easy to work with especially on a 2.4mm screwdriver. Link to comment Share on other sites More sharing options...
Tug Posted March 16, 2015 Share Posted March 16, 2015 I didn't know they made 25.only 24 and 26 I thought Link to comment Share on other sites More sharing options...
GeorgeF Posted March 16, 2015 Share Posted March 16, 2015 Vapowire 25ga. Link to comment Share on other sites More sharing options...
GeorgeF Posted March 16, 2015 Share Posted March 16, 2015 Link to comment Share on other sites More sharing options...
Tug Posted March 16, 2015 Share Posted March 16, 2015 Wow,I didn't know that.^^^ Link to comment Share on other sites More sharing options...
shen_long86 Posted March 16, 2015 Share Posted March 16, 2015 New build in the cartel 26ga macro 4 wraps on a 9/64 screwdriver @ 0.37 ohms Link to comment Share on other sites More sharing options...
GeorgeF Posted March 16, 2015 Share Posted March 16, 2015 Looks good. Link to comment Share on other sites More sharing options...
shen_long86 Posted March 16, 2015 Share Posted March 16, 2015 Thx george Link to comment Share on other sites More sharing options...
gag8tor Posted March 16, 2015 Share Posted March 16, 2015 Looking good George/Shen Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now