yeroc1982 Posted August 10, 2014 Share Posted August 10, 2014 9 wraps of twisted 28g, coming in at 1.05ohm. It's awesome at 20watts! Link to comment Share on other sites More sharing options...
xCOXINATORx Posted August 10, 2014 Share Posted August 10, 2014 Diamond Coil on the Kayfun... I don't think it will work that well, but it looks good... haha Link to comment Share on other sites More sharing options...
Spyke_696 Posted August 10, 2014 Share Posted August 10, 2014 Link to comment Share on other sites More sharing options...
Spyke_696 Posted August 10, 2014 Share Posted August 10, 2014 dual 28 gauge twisted kanthol .5 ohms in my tobh atty sitting on my nemesis Link to comment Share on other sites More sharing options...
Crazyavonlady Posted August 12, 2014 Share Posted August 12, 2014 My go to build. Dual parallel 26 guage 6 wraps on a 2 mm screwdriver. Link to comment Share on other sites More sharing options...
Mtdobies Posted August 12, 2014 Share Posted August 12, 2014 Nice! I need to order some 26g. Kinda looking at different type of wire now. Link to comment Share on other sites More sharing options...
Garrett1234567 Posted August 24, 2014 Share Posted August 24, 2014 Duel parallel 28g kanthal Wicked up Ohm at .33 Chuckin clouds Link to comment Share on other sites More sharing options...
Garrett1234567 Posted August 24, 2014 Share Posted August 24, 2014 Here's one I did last night, duel parallel mustache with 28g, .36 ohms Link to comment Share on other sites More sharing options...
Mtdobies Posted August 24, 2014 Share Posted August 24, 2014 Wow Link to comment Share on other sites More sharing options...
Raptor Vaper Posted August 27, 2014 Share Posted August 27, 2014 Loving this duquit box mod. It hits so hard and has such low voltage drop that all it needs is a single coil. I put a parallel 24 gauge coil in it. Macro coil. Jeeeez Link to comment Share on other sites More sharing options...
Mr Smith Posted August 28, 2014 Share Posted August 28, 2014 my first attempt at a dual coil build in the KFL+ picture kinda sucks but I was more anxious to try it than to take pics of it. I believe it was about 9.5 wraps each. 32G wire, the pair came out to 1.2ohm (minimum my vamo will fire) Link to comment Share on other sites More sharing options...
Raptor Vaper Posted August 28, 2014 Share Posted August 28, 2014 Dual parallel coil 24 gauge 5 wraps. Didn't test on the ohm reader but what an awesome build! Link to comment Share on other sites More sharing options...
christov11 Posted August 28, 2014 Share Posted August 28, 2014 Just found my dripping flavor!!! And new build is sweet Link to comment Share on other sites More sharing options...
rjc3095 Posted August 29, 2014 Share Posted August 29, 2014 Ok so what is the difference between the loosely wrapped coils and the tightly wrapped coils vapor and taste wise? Link to comment Share on other sites More sharing options...
christov11 Posted August 29, 2014 Share Posted August 29, 2014 Ok so what is the difference between the loosely wrapped coils and the tightly wrapped coils vapor and taste wise? I would love to tell you but I can't seem to get mine to stick together... Logically thinking. Loose wraps must heat up more of the wick therefore more of the juice all the while giving more airflow but then again... I'm not experienced enough yet, only using logic Link to comment Share on other sites More sharing options...
rjc3095 Posted August 29, 2014 Share Posted August 29, 2014 I would love to tell you but I can't seem to get mine to stick together... Logically thinking. Loose wraps must heat up more of the wick therefore more of the juice all the while giving more airflow but then again... I'm not experienced enough yet, only using logic Sounds logical lol christov11 1 Link to comment Share on other sites More sharing options...
christov11 Posted August 29, 2014 Share Posted August 29, 2014 I know it's not a build but it's building time!!! Haha Now it's coming together... BOOM!! Picture heavy but wtv I had fun haha Link to comment Share on other sites More sharing options...
Mr Smith Posted August 29, 2014 Share Posted August 29, 2014 (edited) first sub ohm build since I finally got around to buying a mechanical mod (magneto) 0.8ohm with 32g 5.5 wraps on bottom, 5 wraps on top; dual coil. and the mod firing it: Edited August 29, 2014 by Mr Smith christov11 and NewDrip 2 Link to comment Share on other sites More sharing options...
Raptor Vaper Posted September 2, 2014 Share Posted September 2, 2014 (edited) So far my best dual parallel in my mutation X. Can't get the coils quite as clean as in my plume veil but they are close close close! Sitting on top of my dual 18650 unregulated duquit box mod, made from kamagong wood. Two Sony vtc-5 batteries. 4 wraps (8/7 with a parallel). Heats up instantly so hot you can't look at it. Chucks the vapor. Let me get a shot of that Edited September 2, 2014 by Raptor Vaper Link to comment Share on other sites More sharing options...
mvince201 Posted September 2, 2014 Share Posted September 2, 2014 Did somebody say something about chucking vapor? Link to comment Share on other sites More sharing options...
Happy Vapor Posted September 2, 2014 Share Posted September 2, 2014 first sub ohm build since I finally got around to buying a mechanical mod (magneto) 0.8ohm with 32g 5.5 wraps on bottom, 5 wraps on top; dual coil. and the mod firing it: Looks like a kayfun. I've never seen dual coils on one. Getting my *** out of bed. I've got to try this. Thank you. Link to comment Share on other sites More sharing options...
Dasfriek Posted September 2, 2014 Share Posted September 2, 2014 My favorite KFL build is a dual coil side be side single strand of 30 gauge wrapped 7 times. Positioned with the air hole blowing between the coils I have to rebuild it today so I'll try and get a pic if my phone will do the job.coils. Link to comment Share on other sites More sharing options...
christov11 Posted September 2, 2014 Share Posted September 2, 2014 (edited) Just built this and I'm gonna test her out... 7 wrap 28g @ 0.51ohms She chucks! I was outside and even with the wind it was solid!!! Need some water! Can't wait to try it indoors... Wife might not be a fan lolll Edited September 2, 2014 by christov11 Link to comment Share on other sites More sharing options...
christov11 Posted September 3, 2014 Share Posted September 3, 2014 Dual parallel 28g at 0.49ohm Link to comment Share on other sites More sharing options...
Raptor Vaper Posted September 3, 2014 Share Posted September 3, 2014 Dual parallel 28g at 0.49ohm Trooper! I've got to where I cannot stand using 28 ga. Maybe its the kanthal I buy but I find it impossible to work with. Even after torching it its super springy christov11 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now