Raptor Vaper Posted July 24, 2014 Share Posted July 24, 2014 Nemesis brass mod, with magnetic and contact upgrade from fat daddy vapes. Caterpillar rda built to 1.35 ohms. 9 wraps, 28 gauge kanthal, dual coil. Couldn't get the whole cloud in the shot Little better Whoo hoo. There we go Mtdobies 1 Link to comment Share on other sites More sharing options...
mvince201 Posted July 24, 2014 Share Posted July 24, 2014 Fresh build before I hit the sack. Goodnight and vape on! Mtdobies and Raptor Vaper 2 Link to comment Share on other sites More sharing options...
trickydick666 Posted July 24, 2014 Share Posted July 24, 2014 .4 ohms 26g kanthal igo-w on panzer Raptor Vaper 1 Link to comment Share on other sites More sharing options...
DragonGunner Posted July 25, 2014 Share Posted July 25, 2014 Another double barrel build in my Russian. I made a mistake and it ohm'd out at .5 so I got rid of it immediately, but it was a much cleaner build. I must admit though this one produced a ton of vapor. Mtdobies and Raptor Vaper 2 Link to comment Share on other sites More sharing options...
Bushwick Posted July 25, 2014 Share Posted July 25, 2014 Check out dragon filling this thread up. Nice builds, bud. Looks like you are having a good time with your Russian. Link to comment Share on other sites More sharing options...
DragonGunner Posted July 25, 2014 Share Posted July 25, 2014 Thanks Bushwick. I'm finding that the double barrel build at .8 is a pretty good sweet spot for my Russian. Link to comment Share on other sites More sharing options...
Bushwick Posted July 25, 2014 Share Posted July 25, 2014 That's what it's all about. Finding your build. I don't post here much because I am pretty content with my single 7 wrap parallel. It hits the spot. Mtdobies 1 Link to comment Share on other sites More sharing options...
DragonGunner Posted July 25, 2014 Share Posted July 25, 2014 I'm still trying to perfect that parallel coil. I did one once or twice and it was great. Using 26/28 ga kanthal in my Russian makes the coils very long...almost too long for the Russian deck. I'll try again as soon as I get rid of my current builds. Link to comment Share on other sites More sharing options...
Raptor Vaper Posted July 25, 2014 Share Posted July 25, 2014 (edited) Nice and hot build for my morning coffee flavor e-juice. 28 gauge 14 wrap around the smallest dowel on my Kk vapetek coil jig. .76 ohms, nice, hot vape. OK vapor production. Straightened coils out and wicked Vapor Sorry for looking rough guys, just woke up and about to get a shower and head to work! Lol, you guys are lucky I put on a shirt and pants.... Almost ready for the day now... Everything that I take is laid out. And I added a nice hit from a vertical microcoil in my aerotank. Much better than the stock coils!! My tools! Coil jig with the 3 dowels laid out, super sharp wire cutters, scissors, a double ended (flat and Phillips) screwdriver, ceramic pointed tip tweezers and my ohms reader! Time for a nice 8 hour work day [emoji106] Edited July 25, 2014 by Raptor Vaper Link to comment Share on other sites More sharing options...
Mtdobies Posted July 25, 2014 Share Posted July 25, 2014 Have a good day! Link to comment Share on other sites More sharing options...
Raptor Vaper Posted July 25, 2014 Share Posted July 25, 2014 Have a good day! You as well buddy! Link to comment Share on other sites More sharing options...
crush02342002 Posted July 25, 2014 Share Posted July 25, 2014 32g triple twist Mtdobies 1 Link to comment Share on other sites More sharing options...
crush02342002 Posted July 25, 2014 Share Posted July 25, 2014 .2ohm duel build vid<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf" flashvars="file=http%3A%2F%2Fvid264.photobucket.com%2Falbums%2Fii164%2Fcrush02342002%2F022_zps7c74cc5e.mp4&title="> Link to comment Share on other sites More sharing options...
Raptor Vaper Posted July 27, 2014 Share Posted July 27, 2014 (edited) New build guys lol I need a life Holy sheet! .15 ohm build. Lordy lordy it glows bright! 24ga 5 wrap sleeper coil (one continuous wire) Macro coil Hang on let me wick it and vape her The weather forecast predicts a lot of cloud cover tonight! Lol! This is a 2 second puller! Edited July 27, 2014 by Raptor Vaper Link to comment Share on other sites More sharing options...
Mtdobies Posted July 27, 2014 Share Posted July 27, 2014 Having a little bit of fun? ^^^ Link to comment Share on other sites More sharing options...
Raptor Vaper Posted July 28, 2014 Share Posted July 28, 2014 Having a little bit of fun? ^^^ A little too much fun, and I may have had too much to drink looking back on that. But hey I build some hella good coils when I'm drunk Link to comment Share on other sites More sharing options...
Mtdobies Posted July 28, 2014 Share Posted July 28, 2014 Haha, as long as your being safe why not?[emoji4] Link to comment Share on other sites More sharing options...
Raptor Vaper Posted July 28, 2014 Share Posted July 28, 2014 Haha, as long as your being safe why not?[emoji4] I also build safe. I know my batteries limits and I will not blow up a battery in my face. That's not worth it just to blow some clouds haha Link to comment Share on other sites More sharing options...
Mtdobies Posted July 28, 2014 Share Posted July 28, 2014 Nope its not worth it. Link to comment Share on other sites More sharing options...
grailhunter78 Posted July 28, 2014 Share Posted July 28, 2014 Finally built first double 24 gauge coil. I am very happy with how much easier it is to use. .25 ohms Link to comment Share on other sites More sharing options...
Raptor Vaper Posted July 28, 2014 Share Posted July 28, 2014 Finally built first double 24 gauge coil. I am very happy with how much easier it is to use. .25 ohms Nice! Did you build it with one continuous wire? That's the only way I can get a dual 24 gauge coil to fit in my caterpillar RDA Link to comment Share on other sites More sharing options...
grailhunter78 Posted July 28, 2014 Share Posted July 28, 2014 Nice! Did you build it with one continuous wire? That's the only way I can get a dual 24 gauge coil to fit in my caterpillar RDA No its two separate coils. Its a stillaire clone by cigreen. Its actually got some pretty big post holes in it. Raptor Vaper 1 Link to comment Share on other sites More sharing options...
charles vapor Posted July 28, 2014 Share Posted July 28, 2014 (edited) So, I have this problem where I build a good coil and continuously think I can make one that out performs the previous, but then it ends up not being as good and then I can't seem to build the one that was really good anymore lol. lately I have been using dual 26 guage on my nimbus, nothing fancy, but seems to be my most consistant build. I read through these and see all kinds of different stuff (all of which I have tried). Long story shortened, I havent built anything with 24 guage or lower, is it worth a try or should I stick with the hundreds of feet of 28 and 26 guage I have. edit: additionally: what have you guys noticed as far as how the height of the coil from the base effects the build? is it best to keep it as close to level with the air holes as possible, or low to the base? Edited July 28, 2014 by charles vapor Link to comment Share on other sites More sharing options...
mvince201 Posted July 28, 2014 Share Posted July 28, 2014 I've found that positioning the coil barely above the air hole works best. Link to comment Share on other sites More sharing options...
grailhunter78 Posted July 28, 2014 Share Posted July 28, 2014 So, I have this problem where I build a good coil and continuously think I can make one that out performs the previous, but then it ends up not being as good and then I can't seem to build the one that was really good anymore lol. lately I have been using dual 26 guage on my nimbus, nothing fancy, but seems to be my most consistant build. I read through these and see all kinds of different stuff (all of which I have tried). Long story shortened, I havent built anything with 24 guage or lower, is it worth a try or should I stick with the hundreds of feet of 28 and 26 guage I have. edit: additionally: what have you guys noticed as far as how the height of the coil from the base effects the build? is it best to keep it as close to level with the air holes as possible, or low to the base? Personally I have found 24 to be the easiest to work with. I would suggest you try it. Honestly i dont think I will go back to the higher cage wires. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now