Love2VapeDaily Posted May 26, 2014 Share Posted May 26, 2014 I'm using the igo w3 with adjustable air flow slots and holes. Doesn't wick well for me Link to comment Share on other sites More sharing options...
mvince201 Posted May 26, 2014 Share Posted May 26, 2014 Yeah I agree! Too much cotton for me! Have to admit the flavor is awesome though. Link to comment Share on other sites More sharing options...
iheartvape Posted May 26, 2014 Share Posted May 26, 2014 The flavor is pretty good, I do give it that! Link to comment Share on other sites More sharing options...
trickydick666 Posted May 27, 2014 Share Posted May 27, 2014 Tried triple twisting 28g kanthal Sunday night....didn't work out lol Link to comment Share on other sites More sharing options...
iheartvape Posted May 27, 2014 Share Posted May 27, 2014 Tried triple twisting 28g kanthal Sunday night....didn't work out lol Lol.. Don't feel bad I tried it once too. Link to comment Share on other sites More sharing options...
raiderep Posted May 29, 2014 Share Posted May 29, 2014 I'm a rookie and just rebuilt a kanger protank 3 coil with organic cotton and 30 gauge wire at 1.5 ohms. I am stoked to have any kind of success and it works very well and tastes great. I also picked up a free hcigar sentinel clone with a grand vapor clone rda and I want to try a dual coil build next as I also had success with a single coil on it at .9 ohms.Three and a half weeks without a stencher and going strong! (wife too) YaY ☺And thanks to everyone on here that posted advice I learned from and showed me that safety is important! iheartvape and 3Rutez 2 Link to comment Share on other sites More sharing options...
Joshuab3687 Posted May 30, 2014 Share Posted May 30, 2014 This is my 26g dual single strand. Cotton wicked down into juice wells. Works extremely well! I love this RDA! 3Rutez 1 Link to comment Share on other sites More sharing options...
Joshuab3687 Posted May 30, 2014 Share Posted May 30, 2014 (edited) Once I vape it dry, I'm gonna try a single coil between the posts. Maybe a nano, dragon wicked. Or maybe dual micro's running vertical over the airholes. Hmmm... which to choose.... But I think I'm gonna do it up with 28g this time to see if I can get the heat down a bit. The Magma is the only RDA I don't stovepipe. Way too hot. Edited May 30, 2014 by Joshuab3687 Link to comment Share on other sites More sharing options...
Joshuab3687 Posted May 31, 2014 Share Posted May 31, 2014 0.65ohm 26g 10 wrap single nano between the posts. Dragon wicked. It was kinda hard to wick it, but I persevered and it hits awesome! The heat is down, which helps due to the limited airflow. 3Rutez 1 Link to comment Share on other sites More sharing options...
Joshuab3687 Posted May 31, 2014 Share Posted May 31, 2014 3Rutez 1 Link to comment Share on other sites More sharing options...
Happy Vapor Posted June 1, 2014 Share Posted June 1, 2014 0.65ohm 26g 10 wrap single nano between the posts. Dragon wicked. It was kinda hard to wick it, but I persevered and it hits awesome! The heat is down, which helps due to the limited airflow.what is that the 3d? Link to comment Share on other sites More sharing options...
Joshuab3687 Posted June 1, 2014 Share Posted June 1, 2014 what is that the 3d? Sorry. Forgot to mention it. Thats the Magma! Link to comment Share on other sites More sharing options...
3Rutez Posted June 2, 2014 Author Share Posted June 2, 2014 (edited) Tried out a build with the 22g that I received the other day. Running @ .59ohm and it rips for a single coil build. My IGO-W looks pathetic atop the 26650 Stingray. Lol. Edited June 2, 2014 by 3Rutez Joshuab3687 1 Link to comment Share on other sites More sharing options...
Joshuab3687 Posted June 2, 2014 Share Posted June 2, 2014 (edited) They are now making 28mm atty's for the Hades.Well, the Hades and other 26650 mods Edited June 2, 2014 by Joshuab3687 Link to comment Share on other sites More sharing options...
3Rutez Posted June 2, 2014 Author Share Posted June 2, 2014 (edited) You mean tank style attomizers? I know the Russian Big is coming soon. As of now they have the HCigar Mega, TOBH, Stillare, and another 28mm RDA that I forget the name of. My Tobeco BIG 28mm Stillare should be at my doorstep tomorrow. Edited June 2, 2014 by 3Rutez Link to comment Share on other sites More sharing options...
Joshuab3687 Posted June 2, 2014 Share Posted June 2, 2014 I have the DDD 28mm atty. But you better believe they'll be making the 28mm rbtas soon. 26650 is the next step in rebuiling evolution. Link to comment Share on other sites More sharing options...
Joshuab3687 Posted June 2, 2014 Share Posted June 2, 2014 Decided to go back to a dual 26g 8 wrap 0.41 ohm build on my Magma. Having the single nano dragon would dry up the cotton faster than it could wick up. Really throws the vapor! Pic didn't do it justice. Was having a hard time snapping the pic at just the right time. 3Rutez 1 Link to comment Share on other sites More sharing options...
VIAWOL Posted June 2, 2014 Share Posted June 2, 2014 26 ga parallel coil reading at .26 ohm. Mmmmmm, so nice but a little close to the limits of my Sony battery. Would take a pic of the coil but my phone stinks 3Rutez 1 Link to comment Share on other sites More sharing options...
Joshuab3687 Posted June 3, 2014 Share Posted June 3, 2014 You mean tank style attomizers? I know the Russian Big is coming soon. As of now they have the HCigar Mega, TOBH, Stillare, and another 28mm RDA that I forget the name of. My Tobeco BIG 28mm Stillare should be at my doorstep tomorrow. Ok. I don't really care for this vendor, but I found a 26650 kayfun at 88evape.com. its only listed as 26650 Kayfun with no descriptions. I'll start diggin and see if I can get word on any upcoming 28mm gennys. Link to comment Share on other sites More sharing options...
2BarMinority Posted June 3, 2014 Share Posted June 3, 2014 My build 1st post also...hi lol Link to comment Share on other sites More sharing options...
3Rutez Posted June 3, 2014 Author Share Posted June 3, 2014 (edited) Not very proud of this one, but figured I would share a pic. My first build in the 28mm Stillare using 22g, and it came out to .17ohm, which is in the red zone of my battery. I tested it out, and it definitely throws the vapor, but I will be rebuilding at a higher ohm before I use it as a regular vape. Legs for days, and the bends are crap, I know. Only had about 5 minutes to build this thing before I had to pick up the kiddies from school. Edited June 3, 2014 by 3Rutez Joshuab3687 1 Link to comment Share on other sites More sharing options...
3Rutez Posted June 3, 2014 Author Share Posted June 3, 2014 I'm really digging this setup, and it looks proper together. trickydick666 and Joshuab3687 2 Link to comment Share on other sites More sharing options...
Joshuab3687 Posted June 3, 2014 Share Posted June 3, 2014 Your setup looks really nice! The coil build is pretty good too! Link to comment Share on other sites More sharing options...
3Rutez Posted June 3, 2014 Author Share Posted June 3, 2014 I'm going to rebuild it with 26g this time. That way I can keep my ohms up without having to wait forever for the coils to heat up. 22g is only good for single coil IMO. I'm not one to step over the limits. I like my hands and face, lol. If I have free time in the near future, I may finally try out a parallel build as well. Link to comment Share on other sites More sharing options...
Joshuab3687 Posted June 3, 2014 Share Posted June 3, 2014 I use 22g as long as I'm using my hades with sony 26650 50a batt Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now