joejoevapekins Posted April 29, 2014 Share Posted April 29, 2014 Joshuab3687 1 Link to comment Share on other sites More sharing options...
CStacksCameron Posted April 30, 2014 Share Posted April 30, 2014 Im running a sentinel m16 clone by grand vapor with a nimbus rba clone and a daul coil setup at .4 ohms and cotton wicks. Link to comment Share on other sites More sharing options...
CStacksCameron Posted April 30, 2014 Share Posted April 30, 2014 *dual Link to comment Share on other sites More sharing options...
Compenstine Posted April 30, 2014 Share Posted April 30, 2014 Just a suggestion... Looks like you may have to much cotton there, try it with less cotton Though you will have to drip more often I think you will find you will get more vapor with less cotton. Link to comment Share on other sites More sharing options...
CStacksCameron Posted April 30, 2014 Share Posted April 30, 2014 Just a suggestion... Looks like you may have to much cotton there, try it with less cotton Though you will have to drip more often I think you will find you will get more vapor with less cotton. next time I rewick it ill do less I just dont like dripping often which is why I used alot, but thanks for the suggestion I will give it a try. Link to comment Share on other sites More sharing options...
awsomr1 Posted May 1, 2014 Share Posted May 1, 2014 Tiger Coil on Veritas Joshuab3687, 3Rutez, Jeffb and 1 other 4 Link to comment Share on other sites More sharing options...
Happy Vapor Posted May 1, 2014 Share Posted May 1, 2014 back to the basics. 28 Guage quad micro coils on igo w6 .37 ohms 3Rutez and Joshuab3687 2 Link to comment Share on other sites More sharing options...
3Rutez Posted May 2, 2014 Author Share Posted May 2, 2014 (edited) Dual twisted 28g micro coils, 7 wraps @ .37ohm. I set this up on my SS Kraken, and it is the best vape I have ever had so far on any atomizer. The flavor and vapor production are out of this world. Edited May 2, 2014 by 3Rutez Link to comment Share on other sites More sharing options...
iheartvape Posted May 3, 2014 Share Posted May 3, 2014 (edited) Simple 28g quad coil. no twists, nothing... @ .2 ohms...Also a little video... its my first little review type video so don't laugh at me too hard... lol... Edited May 3, 2014 by iheartvape 3Rutez 1 Link to comment Share on other sites More sharing options...
Compenstine Posted May 3, 2014 Share Posted May 3, 2014 Nice Build! Link to comment Share on other sites More sharing options...
Happy Vapor Posted May 6, 2014 Share Posted May 6, 2014 Double flat bastard single coil wrap. .6 ribbon twisted w/ 28 Guage wire then twisted w/ another .6 ribbon 3Rutez 1 Link to comment Share on other sites More sharing options...
VIAWOL Posted May 6, 2014 Share Posted May 6, 2014 Ack! It's a monster! ...how's it vape Link to comment Share on other sites More sharing options...
Happy Vapor Posted May 6, 2014 Share Posted May 6, 2014 Like a boss. I want to add a second coil just didn't have the time maybe when I get home. If it's dual coil I will still be in the safe parameters of my battery. Barely. .26 ohms Link to comment Share on other sites More sharing options...
3Rutez Posted May 6, 2014 Author Share Posted May 6, 2014 (edited) Looks like the twisted wreckage from a driver's training video, lol. Would love to see a pic of it all wicked up. Nice job. Edited May 6, 2014 by 3Rutez Link to comment Share on other sites More sharing options...
Joshuab3687 Posted May 6, 2014 Share Posted May 6, 2014 Just a simple dual 22g 5/4 wrap on Helios clone. Ohms out at 0.14 wizard46304 1 Link to comment Share on other sites More sharing options...
wizard46304 Posted May 7, 2014 Share Posted May 7, 2014 The Helios was my first rda, very easy to build. Link to comment Share on other sites More sharing options...
Joshuab3687 Posted May 7, 2014 Share Posted May 7, 2014 The Helios was my first rda, very easy to build. Yeah, it was one of a few I had laying in my vapin' takle box that didn't have a build in it. Was getting my Peterbilt worked on today, so I had some downtime to build for a few...um,...hours. Lol Link to comment Share on other sites More sharing options...
VIAWOL Posted May 7, 2014 Share Posted May 7, 2014 Yeah, it was one of a few I had laying in my vapin' takle box that didn't have a build in it. Was getting my Peterbilt worked on today, so I had some downtime to build for a few...um,...hours. Lol I like hearing about vaping truckers. It's also nice to have a good dripper to enjoy at the end of the day like a strong cigar. I'm sad I'm without one for a few weeks. I look forward to posting my vape mail and seeing up my new omega when it arrives. Joshuab3687 1 Link to comment Share on other sites More sharing options...
iheartvape Posted May 7, 2014 Share Posted May 7, 2014 Im gonna share this one with you guys, even though I could not get it to work good with out getting a burnt cotton taste. I am gonna try it again later though.... triple twisted 30g, 6/7 wrap, set up in a quad coil, @ .2 ohms... Link to comment Share on other sites More sharing options...
joejoevapekins Posted May 9, 2014 Share Posted May 9, 2014 Quad dragon at .28ohm 26g a1 Link to comment Share on other sites More sharing options...
iheartvape Posted May 9, 2014 Share Posted May 9, 2014 Nice! How does she vape? Does she "Chuck the Vapor"? joejoevapekins 1 Link to comment Share on other sites More sharing options...
joejoevapekins Posted May 9, 2014 Share Posted May 9, 2014 Like chuck Norris lol. Need more air but at 9/64 with the bevel done with a 7/32 bit its is pure dragon Link to comment Share on other sites More sharing options...
Joshuab3687 Posted May 9, 2014 Share Posted May 9, 2014 Like chuck Norris lol. Need more air but at 9/64 with the bevel done with a 7/32 bit its is pure dragon Can you show a close up pic of your bevel method? All mine are just straight drilled. You've got me intrigued joejoevapekins 1 Link to comment Share on other sites More sharing options...
joejoevapekins Posted May 9, 2014 Share Posted May 9, 2014 (edited) Here is the nimbus and patriot Not perfect but I'm getting there Edited May 9, 2014 by joejoevapekill Link to comment Share on other sites More sharing options...
Joshuab3687 Posted May 9, 2014 Share Posted May 9, 2014 Does the bevel eliminate whistling? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now