joejoevapekins Posted April 9, 2014 Share Posted April 9, 2014 Hell I'd try that lol. 32g is so hard to see Link to comment Share on other sites More sharing options...
Joshuab3687 Posted April 9, 2014 Share Posted April 9, 2014 Hell I'd try that lol. 32g is so hard to see I just don't know if I can get 3 strands of 28g thru the posts on my patriot or nimbus. I may be able to do it on the nimbus. I drilled out the post holes a while back. I'll check it this evening. Link to comment Share on other sites More sharing options...
Love2VapeDaily Posted April 9, 2014 Share Posted April 9, 2014 Last night i used 30g twisted. Well i twisted 2 pieces of twisted 30g together on a simple 4/5 build. My svd wouldn't read it unless. 0.0Ohm is what it really was. Joshuab3687 1 Link to comment Share on other sites More sharing options...
Joshuab3687 Posted April 9, 2014 Share Posted April 9, 2014 Last night i used 30g twisted. Well i twisted 2 pieces of twisted 30g together on a simple 4/5 build. My svd wouldn't read it unless. 0.0Ohm is what it really was. Lmao! Talk about super sub-ohm! Link to comment Share on other sites More sharing options...
Compenstine Posted April 9, 2014 Share Posted April 9, 2014 I got some 22ga and some 24ga on the way. Gota try it. I'm going to do a dual Tiger Paw using 22ga and .9 flat when I get my drilled out Patriots for CCI. Joshuab3687 1 Link to comment Share on other sites More sharing options...
joejoevapekins Posted April 9, 2014 Share Posted April 9, 2014 I just don't know if I can get 3 strands of 28g thru the posts on my patriot or nimbus. I may be able to do it on the nimbus. I drilled out the post holes a while back. I'll check it this evening. drill the post out. What I did. I can squeeze 4 strands of 26 in it now lol Link to comment Share on other sites More sharing options...
Joshuab3687 Posted April 9, 2014 Share Posted April 9, 2014 My nimbus is already drilled out. I'm not doing that to my auth patriot. I have 5 patriot foggys and 3 helios clones at home. When I get in, I'll have to fire up the drill press! Got a lot of drillin to do! (Double entendre implied) lmao! joejoevapekins 1 Link to comment Share on other sites More sharing options...
Joshuab3687 Posted April 10, 2014 Share Posted April 10, 2014 (edited) Just farting around! Dual parallel 26g 3 wrap siamese micro's at .12 ohms Edited April 10, 2014 by Joshuab3687 Nico5point0 1 Link to comment Share on other sites More sharing options...
yeroc1982 Posted April 12, 2014 Share Posted April 12, 2014 Twisted 26g, 3/4 wrap. Coming in at .34ohm. Joshuab3687 1 Link to comment Share on other sites More sharing options...
Nathan Dines Posted April 13, 2014 Share Posted April 13, 2014 Hi fellow vapours, I hace made a new coil by the name of 'cave coil'. its 24gauge Kanthal with 6 wraps, align the coils with your air hole/holes if dual. Then wrap cotton around the coils and voila you have your cave coil or if you want, dual cave coil :-p Link to comment Share on other sites More sharing options...
3Rutez Posted April 15, 2014 Author Share Posted April 15, 2014 My first build on my new Kraken clone. Next one will be better. Loving the dual coil genny. Running at .74ohm. Link to comment Share on other sites More sharing options...
Joshuab3687 Posted April 15, 2014 Share Posted April 15, 2014 Nice! Link to comment Share on other sites More sharing options...
Vispera Posted April 15, 2014 Share Posted April 15, 2014 My first build on my new Kraken clone. Next one will be better. Loving the dual coil genny. Running at .74ohm. Is that stingray a clone if so how do you like it I just ordered one Link to comment Share on other sites More sharing options...
3Rutez Posted April 15, 2014 Author Share Posted April 15, 2014 Yes it is, and I love it. Link to comment Share on other sites More sharing options...
3Rutez Posted April 18, 2014 Author Share Posted April 18, 2014 I had a little spare time, so I changed my build. I'm now rocking dual twisted 28g micro coils, running at .47ohm. I kept getting a dry hit every now and then with the last build, and let me tell you, it is horrible. The single strand was heating up quicker than the cotton could wick. This current build is perfection, and I have always been very fond of the twisted coils. They hit my sweet spot. Joshuab3687 and Jeffb 2 Link to comment Share on other sites More sharing options...
Compenstine Posted April 18, 2014 Share Posted April 18, 2014 I had a little spare time, so I changed my build. I'm now rocking dual twisted 28g micro coils, running at .47ohm. I kept getting a dry hit every now and then with the last build, and let me tell you, it is horrible. The single strand was heating up quicker than the cotton could wick. This current build is perfection, and I have always been very fond of the twisted coils. They hit my sweet spot. Nice! Link to comment Share on other sites More sharing options...
Joshuab3687 Posted April 18, 2014 Share Posted April 18, 2014 I had a little spare time, so I changed my build. I'm now rocking dual twisted 28g micro coils, running at .47ohm. I kept getting a dry hit every now and then with the last build, and let me tell you, it is horrible. The single strand was heating up quicker than the cotton could wick. This current build is perfection, and I have always been very fond of the twisted coils. They hit my sweet spot. Gonna hafta get a Kraken soon! Thats a nice build! Link to comment Share on other sites More sharing options...
3Rutez Posted April 19, 2014 Author Share Posted April 19, 2014 It's a great RBA. I'm still getting used to the warmer vapor that the dual coil genny creates, compared to the single in the RSST. I've been vaping on this build for 7 hrs without a dry hit so far. Joshuab3687 1 Link to comment Share on other sites More sharing options...
Compenstine Posted April 29, 2014 Share Posted April 29, 2014 Dual Tiger Paw Coils. Just need to wick it and shee how she does. 22ga round and .9 flat Kanthal A 3.4 ohms Happy Vapor 1 Link to comment Share on other sites More sharing options...
Compenstine Posted April 29, 2014 Share Posted April 29, 2014 Test fire, it is way to hot of a vape for my lungs I can't even do a 1 second draw before it chokes me. LOL Had some trouble with my Ohms on this one but after some tweaking I finally got it to settle at .30ohms Link to comment Share on other sites More sharing options...
Happy Vapor Posted April 29, 2014 Share Posted April 29, 2014 Dual Tiger Paw Coils. Just need to wick it and shee how she does. 22ga round and .9 flat Kanthal A 3.4 ohms that is a sweet build. Did you use a drill to twist the wire and ribbon. My attempts of this have been failure. Lol Link to comment Share on other sites More sharing options...
Compenstine Posted April 29, 2014 Share Posted April 29, 2014 Dremel, It seems to be a little fast on even it's lowest setting but works for me. Link to comment Share on other sites More sharing options...
Happy Vapor Posted April 29, 2014 Share Posted April 29, 2014 ThanksThanks just twist it like normal Link to comment Share on other sites More sharing options...
Compenstine Posted April 29, 2014 Share Posted April 29, 2014 I bought some small chuck (Collet) that will allow me to clamp down on the wire nice and tight. They come in a set link below https://www.dremel.com/en-us/Accessories/Pages/ProductDetail.aspx?pid=4485 Link to comment Share on other sites More sharing options...
iheartvape Posted April 29, 2014 Share Posted April 29, 2014 I been using a 24g dual macro coil build. I tried going back to a simple 28g twisted, then a 28g non twisted and a 30g twisted, but I can't vape those anymore, don't get the nice hot draws of them.... I been spoiled. Joshuab3687 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now