Joshuab3687 Posted March 5, 2014 Posted March 5, 2014 Thats what I thought! I misunderstood your post about trying something diff. My bad bro! Lol
Joshuab3687 Posted March 5, 2014 Posted March 5, 2014 I think all the vapor has gone to my brain! It's super hazy up there! Compenstine 1
Hadouken Posted March 5, 2014 Posted March 5, 2014 I need to order ribbon wire is .9 the best to go with for 24-22gage wire .9 is definitely my preferred for gauges up to 30g.
Proetus Posted March 14, 2014 Posted March 14, 2014 Rebuilt my dripper and KFL today to make them more suitable for the DNA20 Both of em are twisted 30g coming in at .9 at 20 Watts.
Joshuab3687 Posted March 17, 2014 Posted March 17, 2014 Did a 4/3wrap of parallel 28g single came out to 0.4ohm Throwing vapor out! Burns thru liquid REALLY quick! Can only get 3, 4second pulls before needing to redrip
iheartvape Posted March 18, 2014 Posted March 18, 2014 Here is a simple Quad Coil I threw in my Helios... Didn't go as sub ohm as I wanted but still chucks the cloud fairly well.....
Joshuab3687 Posted March 18, 2014 Posted March 18, 2014 @Joe, are u wrapping that on a machine screw? If so, what size? Thats a nice looking coil. Very uniform! Its dang near impossible to get a spaced coil to look like that without using a screw as a guide. Lol
joejoevapekins Posted March 18, 2014 Posted March 18, 2014 @Joe, are u wrapping that on a machine screw? If so, what size? Thats a nice looking coil. Very uniform! Its dang near impossible to get a spaced coil to look like that without using a screw as a guide. Lolnope just using a old screwdriver lol. I wrap it around some what even pull the tails tight to get the slack out then ill pull the coil apart making it wider after thay i push the coil back together and pull the tails to tighten it back up. And i usually get a nice even coil by doing that..ill take some pics on my next one
joejoevapekins Posted March 18, 2014 Posted March 18, 2014 Using some left over to show this. step 2.step 3 wrap it.step 4 sruntch itstep 5 pull it tightstep 6 pull it apart and pull it tight. This helps get the spacing rightstep 7 push it back togetherstep 8 let go and boom coil
Joshuab3687 Posted March 18, 2014 Posted March 18, 2014 Very nice bro! I'll have to give it a shot tonite! Thanx for sharing that
Compenstine Posted March 19, 2014 Posted March 19, 2014 Rebuilt this on my IGO W4. This is the same wire that was on my Trident in the twisted coil thread. I just unwrapped it and recoiled it for the IGO. I did not like the way I had to set up on the Trident after busting the post. It was not acting right either. Trident is now in the scrap parts bin.
iheartvape Posted March 22, 2014 Posted March 22, 2014 My most recent build... Twisted 28g Macro coil with organic cotton. I have no idea what the resistance is at, the center pin on my Helios got pushed in a little so my ohm reader won't read it now.
Love2VapeDaily Posted March 22, 2014 Posted March 22, 2014 How can i post a pic with tapatalk? I been using 30ga 13/12wrap dual coils wrapped around a wooden toothpick. In parrallel coming in at 1.3ohm on my svd. Vapes great ready for my sentinel once i pull the trigger. Want to post pics. Its my first dual coil build and they are so neat and tidy. Using cotton as wick now and no more silica for me.
Joshuab3687 Posted March 22, 2014 Posted March 22, 2014 L2VD, just to the left of the text block should be a + sign. Click that, then it should add icons above the text block. The left most icon should be a camera for taking a pic. The next one should be what looks like a mountain, for choosing a pic that you already took. Hope that helps bro!
Love2VapeDaily Posted March 22, 2014 Posted March 22, 2014 My phones camera ain't worth horsesh!t. Sorry for the fuzzy coil, i can clearly see its touching all the way across and its sister coil is on the other side of the post.What is a good way to split a coil in half so i can run them verticaly?
Joshuab3687 Posted March 23, 2014 Posted March 23, 2014 My phones camera ain't worth horsesh!t. Sorry for the fuzzy coil, i can clearly see its touching all the way across and its sister coil is on the other side of the post. What is a good way to split a coil in half so i can run them verticaly? uploadfromtaptalk1395519461595.jpg Example: wrap 4, space a little, wrap another 4. Keep rod/drill bit inserted in first 4, take tweezers and GENTLY rotate other 4 over to make a pair of 4's side by side vertical like. I hope this helps.
Joshuab3687 Posted March 27, 2014 Posted March 27, 2014 Got a crazy idea for a coil build, but I have to wait till I get home. Its gonna require a specialty tool. I'm hoping it works! I'm not gonna give it away just yet, but I'll post some pics on saturday or sunday. Vispera 1
Joshuab3687 Posted April 9, 2014 Posted April 9, 2014 Simple 26g dual 6/5 wrap 5/65th bit siamese (single strand) center mounted. .32ohm Compenstine 1
Joshuab3687 Posted April 9, 2014 Posted April 9, 2014 I'm all out of tiger wire. I'll have to twist some up when/if I get home this weekend. I know that all my coils I build would last for a good long time, but I just can't seem to stop taking them out and putting a new build in. Can't wait to get home a mess around with my 22g kanthal! Love2VapeDaily and joejoevapekins 2
BigClouds1021 Posted April 9, 2014 Posted April 9, 2014 A little hard to see, but this is a 2 30g wire, .8mm ribbon flatbasturd dual coil build. Running at about .4ohms. Love the flavor on this build.
Joshuab3687 Posted April 9, 2014 Posted April 9, 2014 If I get home this w/e, I'd like to try braiding 3 pieces of 32g together. Not a true twist, but actual braiding. Anyone here try this?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now