vaporraper Posted January 1, 2014 Posted January 1, 2014 I stopped by my buddy's vape bar the other day, and he asked me the same thing he always does, which is what crazy coil am I building at the moment. I told him about the Tiger Coil, twisting 28g and .8 ribbon wire together. He immediately grabbed the drill and twisted some up, lol. Dual tiger on an iGo-W at .2ohms, and it hits like a champ with awesome flavor. I need to order some ribbon and more 28g. Pics please,would love to see it! :-)
Mrwaylon Posted January 1, 2014 Posted January 1, 2014 I stopped by my buddy's vape bar the other day, and he asked me the same thing he always does, which is what crazy coil am I building at the moment. I told him about the Tiger Coil, twisting 28g and .8 ribbon wire together. He immediately grabbed the drill and twisted some up, lol. Dual tiger on an iGo-W at .2ohms, and it hits like a champ with awesome flavor. I need to order some ribbon and more 28g. That's awsome lol. I can't wait to get me a mech mod. The MVP 2 ain't to good for some builds.
VaporDragon77 Posted January 1, 2014 Posted January 1, 2014 Think im going to try a braided coil. Yup three strands braided then coiled.
Mrwaylon Posted January 2, 2014 Posted January 2, 2014 i cant wait to get me a mech mod. some of them coils are really awsome.
3Rutez Posted January 2, 2014 Author Posted January 2, 2014 I don't do Instagram, but if any of you do, check out this Deedupdex guy. He has some INSANE coil builds. LOL Compenstine, Jeffb and igotit 3
Compenstine Posted January 2, 2014 Posted January 2, 2014 I don't do Instagram, but if any of you do, check out this Deedupdex guy. He has some INSANE coil builds. LOL Now those are some wild builds, Awesome! Thanks for posting that!
Mrwaylon Posted January 2, 2014 Posted January 2, 2014 I don't do Instagram, but if any of you do, check out this Deedupdex guy. He has some INSANE coil builds. LOL Those are some awesome builds there.
spydre Posted January 3, 2014 Posted January 3, 2014 Okay, so my other half showed me a youtube video of this guy vaping what he called a "supersoaker" coil. There was vapor coming out of the air holes in the tank. Not to mention the clouds. So.....does that use up a lot of juice, these specialty builds to make the bigger clouds, or to hit harder (like sub ohm at regular voltage rating, super high watts rating)?
Proetus Posted January 3, 2014 Posted January 3, 2014 Yes RBA/RDA generally chew up the juice. I've been using my Kayfun 3.1 steadily the last 3 days and I'm going thru 2-3 tanks a day. It holds 4.5-5ml. That's also using 2-3 other mods as well, cartotanks and my fogger. KFL has a vertical chimney build w/ hemp at 1.4ohms.
Proetus Posted January 3, 2014 Posted January 3, 2014 (edited) Here's a pic if my KFL coil. I'll try and grab one next time I open it up to refresh the hemp. I need to find a spacer for the neg post so the leg is even instead of angled. Edited January 3, 2014 by Proetus
Mrwaylon Posted January 3, 2014 Posted January 3, 2014 Here's a pic if my KFL coil. I'll try and grab one next time I open it up to refresh the hemp. I need to find a spacer for the neg post so the leg is even instead of angled. Nice build proetus I'm hoping to be getting. Kayfun this weekend.
3Rutez Posted January 3, 2014 Author Posted January 3, 2014 The "super soaker" build is a popular sub-ohm build for new drippers who are chasing clouds. The vapor that you see shooting from the air holes is sort of like a reverse primer puff. They say it helps to improve flavor. vaporraper 1
vaporraper Posted January 3, 2014 Posted January 3, 2014 The "super soaker" build is a popular sub-ohm build for new drippers who are chasing clouds. The vapor that you see shooting from the air holes is sort of like a reverse primer puff. They say it helps to improve flavor. Would u recomend doing that for a other setups that are nit sub-ohm and is that something u do every time u add fluid?
3Rutez Posted January 3, 2014 Author Posted January 3, 2014 I don't do it. I'm not fond of fluid leaking out, which is what can occur with even the slightest exhale into the tip, in my experience at least. They usually do it with each fresh pull on the dripper, not just directly after dripping. vaporraper 1
Proetus Posted January 4, 2014 Posted January 4, 2014 (edited) Alright i never got around to posting more pics of the KFL coil as i just got on a roll and built it without taking any pictures. Building my two Rockets which are essentially the same build. On a side note, the blue turned purple after soaking with dawn dishsoap wtf! Coils built 1.7Ω and a 2.0Ω. Closeup First wrap of hemp before installing the chimney. The hemp was presoaked to enable positioning and it also makes it easier because its expanded already. With chimney installed and additional hemp packed in. Finish assembly, fill and vape! Edited January 4, 2014 by Proetus
Mrwaylon Posted January 4, 2014 Posted January 4, 2014 Alright i never got around to posting more pics of the KFL coil as i just got on a roll and built it without taking any pictures. Building my two Rockets which are essentially the same build. On a side note, the blue turned purple after soaking with dawn dishsoap wtf! Coils built 1.7Ω and a 2.0Ω. Closeup First wrap of hemp before installing the chimney. The hemp was presoaked to enable positioning and it also makes it easier because its expanded already. With chimney installed and additional hemp packed in. Finish assembly, fill and vape! Nice builds proetus!!!!. How dose the hemp do? And where can u buy some at?. I did a 11 wrap micro on a 5/64 came out at 1.7 ohms. Buckeyevape2024 1
Proetus Posted January 4, 2014 Posted January 4, 2014 (edited) Love the hemp. So much more robust then cotton. Can generally go 3-4 weeks before having to change it. Takes about a day to clean it between the oxyclean soak, and boil/rinse cycles. Takes about two tanks before it's broken in tho.http://www.hemptraders.com/product-p/f-dg1.htm However that's sold by the Kilogram. More then you'll ever use. Maybe get together with some other folks here and go in together. Edited January 4, 2014 by Proetus clater24 1
WillBlack Posted January 5, 2014 Posted January 5, 2014 These folks seem to have it a bit cheaper. http://www.bulkhempwarehouse.com/100-degummed-soft-hemp-fiber/ This stuff looks prettier. http://www.bulkhempwarehouse.com/100-hemp-sliver/
Proetus Posted January 5, 2014 Posted January 5, 2014 Stuff in your second link doesn't work very well. If you want some solid hemp info and don't mind reading a lot, google 'ecf just hemp' 1000+ posts regarding hemp.
spydre Posted January 5, 2014 Posted January 5, 2014 Okay, Proteus, because the picture is there, and I'm an uneducated fool about this, I see the first picture with wicking material just around the coil, but why do you need so much of the extra that you packed in, rather than just running the wick with the coil?
Proetus Posted January 5, 2014 Posted January 5, 2014 Short answer, to prevent flooding. Long answer, if you look at the second picture, you can see the two channels on the base and that run up the sides of the deck. This is how the juice gets from the tank to the coil. In the last picture you can see the base of the chimney that goes from the bottom up to just past the coils. The channels allow the juice to flow up and keep the hemp saturated. With the packing just right, you should never get a dry hit or flooding. In essence the vertical chimney build is a super Carto. Hope that helps! spydre 1
Proetus Posted January 11, 2014 Posted January 11, 2014 Decided to rebuild my Hybrid this morning. Coil Wrapped in Cotton, if you look can see the coil peaking out. Ceramic tip cools the vape a touch Click for vapor!
Hadouken Posted January 14, 2014 Posted January 14, 2014 (edited) Hi guys... the Tiger Coil is my creation. Rip Trippers gave me full credit for it, but he doesn't do it like me. I twist mine tighter. Rip said he tried both and preferred the looser twist. But he also aims for a higher resistance than myself and wraps on a larger bit. Here's a copy and paste that I posted elsewhere. It includes my thoughts on each variation that I have tried. I am a cloud chaser by nature as it has been a fascination of mine long before vaping even existed. But I am also a flavor junkie. This idea came about because I was always a fan of Tinman coils. The crisp flavor production from ribbon wire is something I'm a huge fan of. But ribbon wire doesn't stack up to round wire when it comes to density and warmth. So I decided to see if I could twist these two wires together while retaining the shape you achieve when twisting a single strand of ribbon. Here's my tutorial... definitely not as high quality as Rip's. Pics of them up close: Original Tiger Coil - .9 ribbon twisted with 28g round kanthal and wrapped on a 5/64 bit. It's a single macro coil and really brings out the undertones of the juices I have tried. Particularly Pluid. Now, I'm not a huge fan of Pluid by itself, but I loved it on this setup. The anise was subdued and I was getting a lot of limeaid type flavor out of it. It was so good that I am now mixing 1/4 Pluid with 3/4 VapeOholic Kryptonite which is a very good limeaid flavor. It is sadly my ADV now. I say sadly because of the cost lol. I need to figure out how to DIY a limeaid with a touch of anise. Tiger Coil v2 - .8 ribbon twisted with 30g kanthal and wrapped on a 1/16 bit. Again, I tested with Pluid. The anise came back, but lime was still very present. Throat hit was bumped way up to the point that 6mg was hitting strong. Tiger Coil v oh forget it... - I went back to the .9 ribbon with 28g so I can wrap it like the v2 to again compare the differences. I hit around the same resistance as well, maybe .2 less. Vapor production was bumped up pretty significantly and again, the anise in Pluid was back in almost full swing. But still that damn good lime was present. But the anise just didn't do it for me at this level of in your face. So I went back to mixing with the limeaid flavor and never looked back. This version stayed in my setup for over 20 tanks until I broke down and tore it apart. Held up like a freaking champ and could have gone longer. Current Tiger coil - .8 ribbon with 28g wrapped on 1/16. Oddly enough, I tried to go higher on the resistance by keeping the same amount of wraps as the .9 ribbon version, but got a slightly less resistance. This is a prime example of why the number of wraps do not matter when trying to determine resistance especially when it comes to twisting. It's the length! Anyway, this is my least favorite variation. Vapor production is the least out of the others. Overall flavor is subdued, but still a clean vape. I've also been dripping my Pluid/Kryptonite mixture to compare to the Tiger coil setups. The flavor is flat out different. I've always said that different coils seem to pull out different notes in various juices. When Rip tried my build, I did not tell him my thoughts on it. His review mirrored my personal thoughts on the flavor production. By the way, if you like throat hit and you are a rebuilder, try this out and let me know your thoughts! Heck, any rebuilder should try and let me know what you think. Hope you enjoyed my dissertation! Edited January 14, 2014 by Hadouken vaporraper and 3Rutez 2
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now