hookahhighness Posted December 2, 2013 Share Posted December 2, 2013 Using a spinner with thirty two gauge kanthal 3 mm silica and have 3.2 ohm heads coming in the mail how should I wrap those and any tips over all Link to comment Share on other sites More sharing options...
joe2003 Posted December 2, 2013 Share Posted December 2, 2013 Tips: 1st- It isn't necessary to post the same question multiple times. You've already gotten some good answers,if they weren't what you wanted to hear ask for clarification. lol 2nd- Never vape a coil until you know the resistance unless you're an expert coil builder.sub ohm builds can be disastrous if mishandled. 3rd- learn to vape on pre-built units until you know what your juices are supposed to taste and vape like.Randomly building coils is a just practice until you have an idea what you want from them and what will work well on your PV. And a Q: How do you know it's a 3.2 ohm head if it hasn't been wrapped yet? The coil determines the ohms not the unit it's being put in. As far as tips on how to wrap the coils refer to your original post,they were asking q's to better know how to help with your individual situation.If you just want general guidelines folks here can help with that as well as youtube vids on techniques. P.S. Different juices like different watts to perform their best,many don't work well at higher power etc. Uma 1 Link to comment Share on other sites More sharing options...
hookahhighness Posted December 2, 2013 Author Share Posted December 2, 2013 All I know is I ordered 3.2 ohm heads idk the resistance Link to comment Share on other sites More sharing options...
bcartervol98 Posted December 2, 2013 Share Posted December 2, 2013 All I know is I ordered 3.2 ohm heads idk the resistance 3.2 ohm IS the resistance. Uma 1 Link to comment Share on other sites More sharing options...
hookahhighness Posted December 2, 2013 Author Share Posted December 2, 2013 Ah well thank you man so than what's going to be the difference between 1.8 heads and 3.2 Link to comment Share on other sites More sharing options...
hookahhighness Posted December 2, 2013 Author Share Posted December 2, 2013 How would you set up be with a spinner than like size kanthal size silica what wrap things like that Link to comment Share on other sites More sharing options...
Aquatroy Posted December 2, 2013 Share Posted December 2, 2013 Someone has a lot of learning to do........ Uma, joe2003 and Tam 3 Link to comment Share on other sites More sharing options...
bcartervol98 Posted December 2, 2013 Share Posted December 2, 2013 Ah well thank you man so than what's going to be the difference between 1.8 heads and 3.2 1.8 ohm coils will give a lot more vapor and be a much warmer vape than a 3.2. The 3.2 will be able to withstand a lot more voltage than the 1.8. The highest I have ever used is 2.5 and now only use 1.8s in some flavors and 2.2s in others. Link to comment Share on other sites More sharing options...
hookahhighness Posted December 2, 2013 Author Share Posted December 2, 2013 Thank you, so I just wasted money on the 3.2 heads? Haha Link to comment Share on other sites More sharing options...
hookahhighness Posted December 2, 2013 Author Share Posted December 2, 2013 How should I wrap the 3.2 ohm heads with the thirty Two kanthal and with the 1.8 and 2.2 what size kanthal and what wrap mucho gracias Link to comment Share on other sites More sharing options...
Compenstine Posted December 2, 2013 Share Posted December 2, 2013 (edited) How should I wrap the 3.2 ohm heads with the thirty Two kanthal and with the 1.8 and 2.2 what size kanthal and what wrap mucho gracias Why are you trying to re wrap a coil for a pe-made coil head? The head already has a coil in it..... Are you asking how to wrap a coil around a coil? I'm confused as to what you are asking. Edited December 2, 2013 by Compenstine Uma and Tam 2 Link to comment Share on other sites More sharing options...
hookahhighness Posted December 2, 2013 Author Share Posted December 2, 2013 To rebuild one is what I'm asking. Sorry for the confusion. Link to comment Share on other sites More sharing options...
hookahhighness Posted December 2, 2013 Author Share Posted December 2, 2013 What size material and how many wraps for 3.2 Head and what size material and how many wraps for a 2.2 or 2.5 head. And this is all rebuilding one. Thanks Link to comment Share on other sites More sharing options...
bcartervol98 Posted December 2, 2013 Share Posted December 2, 2013 Buy pre-made coils until you understand vaping basics. You are trying to go from riding a tricycle to flying an airplane without all the steps in between imo. Uma 1 Link to comment Share on other sites More sharing options...
hookahhighness Posted December 2, 2013 Author Share Posted December 2, 2013 Idk where to find any of this info of I don't ask. Know any good info sites Link to comment Share on other sites More sharing options...
Tam Posted December 2, 2013 Share Posted December 2, 2013 Thank you, so I just wasted money on the 3.2 heads? Haha If I remember correctly I originally recommended you get 1.8 ohm or 2.2 ohm coils. The 3.2 ohm coils were strictly your idea. *sighs* Link to comment Share on other sites More sharing options...
Compenstine Posted December 2, 2013 Share Posted December 2, 2013 (edited) I don't recall anyone here ever recommending a 3.2 coil. As far as answers to your rebuilding a KPT head there is very good pinned thread It takes you step by step on what you need and how to rebuild a KPT coil. If that is not what you need Google is your friend "Rebuild a KPT Coil" Edited December 2, 2013 by Compenstine Link to comment Share on other sites More sharing options...
hookahhighness Posted December 2, 2013 Author Share Posted December 2, 2013 No I bought the heads online a few days ago. And I know how to put it together as in build it only thing I'm lost on is the wraps I should do with what size kanthal and Silica to use on diff size heads. I really do appreciate your input man it does help. Like I said idk one person that vapes. Do thank you Alot. Link to comment Share on other sites More sharing options...
hookahhighness Posted December 2, 2013 Author Share Posted December 2, 2013 I might just be over thinking this haha. My ohm reader will be in today I was told my head should read between 1.5 & 2.5 Link to comment Share on other sites More sharing options...
dannyk Posted December 2, 2013 Share Posted December 2, 2013 Eh ? Link to comment Share on other sites More sharing options...
dannyk Posted December 2, 2013 Share Posted December 2, 2013 Just use a Mini Davide on your spinner with a standard 1.8 or 2.2 coil with the voltage around 3.6 - 3.8 You will get along just fine. I really don't see the point in any coil over 2.5 you will just flatten the spinner quicker. Has this sunk in or will you post another possibly 5 threads asking the same. Link to comment Share on other sites More sharing options...
bcartervol98 Posted December 2, 2013 Share Posted December 2, 2013 (edited) Order Coils in your preferred resistance Then install the coil Then vape till your coil goes bad Reinstall a new coil and repeat Its not rocket science. Rebuilding and such is an advanced activity that I am not ready for especially when coils are around $1 and last a couple weeks. Learn the basics of Vaping, then move on a step at a time if you want to turn it into a hobby but I suggest taking a "crawl before you walk" approach. My 2 cents (again) Edited December 2, 2013 by bcartervol98 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now