joejoevapekins Posted March 18, 2014 Posted March 18, 2014 Ive got to find me another. Not paying over 100$ for a mini fluke again lol
Joshuab3687 Posted March 18, 2014 Posted March 18, 2014 (edited) I'd like to find one that reads down to the thousandths 0.009 Not that i'd ever build that low. Just wNt somethig that readz something like 0.123 Edited March 18, 2014 by Joshuab3687
Joshuab3687 Posted March 18, 2014 Posted March 18, 2014 I want this one: http://store.tlcvapes.com/accessories/cartomizer-and-atomizer-ohm-meter/ It supposed to be accurate to 0.005ohm or 0.2% But they're outta stock
joejoevapekins Posted March 18, 2014 Posted March 18, 2014 I'd like to find one that reads down to the thousandths 0.009 Not that i'd ever build that low. Just wNt somethig that readz something like 0.123that would be great to have. With that you could really dial in the ohms
Compenstine Posted March 18, 2014 Posted March 18, 2014 I wish I could find those in bulk, it would be nice addition for my site. I just got done looking at Fasttech and none the have go down that low. I did a search on " When the measurement is below 1.00Ohm, the meter will display mOhms, or 1/1000s of an Ohm, instead of Ohms." Almost every one came up saying the same info. Wondering i there are some that do this that are on fast tech and just isn't mentioned in the description..
Joshuab3687 Posted March 18, 2014 Posted March 18, 2014 I wish I could find those in bulk, it would be nice addition for my site. I just got done looking at Fasttech and none the have go down that low. I did a search on " When the measurement is below 1.00Ohm, the meter will display mOhms, or 1/1000s of an Ohm, instead of Ohms." Almost every one came up saying the same info. Wondering i there are some that do this that are on fast tech and just isn't mentioned in the description.. I've searched everywhere for em. That site i linked is the only one thst I've seen that goes that low. If I were more electronically inclined, i'd just build one. But alas, I'd just wind up hurting myself with a soldering iron. Lol
joejoevapekins Posted March 18, 2014 Posted March 18, 2014 Only thing that ive found that reads that low is my fluke. But tgat is expensive
Joshuab3687 Posted March 18, 2014 Posted March 18, 2014 Only thing that ive found that reads that low is my fluke. But tgat is expensive Yeah... I'm not buying an actual Fluke meter. I have a decent multimeter, but its sooo darn cumbersome using while I'm building coils. Lol
joejoevapekins Posted March 18, 2014 Posted March 18, 2014 The OHM Meter is a precise device that can measure the OHMs that your atomizers are being built at to ensure the safety of your batteries or circuit protector boards. When it comes to blowing clouds you want to get your OHMs down as low as possible, and you want to constantly test the OHM level on your RBA. If you are running a variable voltage device and need to get your OHM precisely at .8 OHMs, then you will want to test them with our OHM meter device for 510 threads. The ohm meter will read a 1 in the first digit to the left if there is no current flow through the device. Accurate to +-0.2%. Will read from 0.01 to 9.99 ohms. Simple and easy to use with native 510 and 901/808 connectors. Extensions or adapters can be used to test other atomizers, RBA’s or cartomizers as well as eGo style atomizers and cartomizers. Our Vape OHM Reader for 510 atomizer connections requires a USB charger for you to plug into your computer and is included in with your order. This is a USB cord ohm meter that plugs into any standard USB port. If you want to make your Atomizer OHM Meter portable, simply pick up a portable battery back with micro USB cord, and you can connect it to your portable battery charger and make your Vape OHM Reader portable at any time! http://www.vapor-hub.com/product/ohm-meter-510/
joejoevapekins Posted March 18, 2014 Posted March 18, 2014 Yeah... I'm not buying an actual Fluke meter. I have a decent multimeter, but its sooo darn cumbersome using while I'm building coils. Lollol yes it can be. Hold the leads and atty requires one more hand some times
Joshuab3687 Posted March 18, 2014 Posted March 18, 2014 I'm fine with what I have now, but really gonna keep my eye out for one that reads out to 0.001 though. If I come across one, I'll let ya know!
joejoevapekins Posted March 18, 2014 Posted March 18, 2014 Please do. Guess im going to get the one i posted till them
Compenstine Posted March 18, 2014 Posted March 18, 2014 This is what I use. from a cheap Radio Shack meter
joejoevapekins Posted March 18, 2014 Posted March 18, 2014 This is what I use. from a cheap Radio Shack meterid buy one
joejoevapekins Posted March 18, 2014 Posted March 18, 2014 Put a fluke 179 in there and it would be king lol Compenstine 1
Compenstine Posted March 18, 2014 Posted March 18, 2014 I thought about making them for sale but figured since you can buy a working meter from FT for $11.00 that it wouldn't sell at the price I would have to charge. Meter was $36 parts and labor figured in I would have to charge $50. If I thought people would pay that I could make them....
Compenstine Posted March 18, 2014 Posted March 18, 2014 Put a fluke 179 in there and it would be king lol LOL I wouldn't do this to a fluke. But you did give me Idea... Make one that would plug into a fluke or other meter.... Just like the plug in cables...
joejoevapekins Posted March 18, 2014 Posted March 18, 2014 And an adapter to for some leads to test voltage load drops
Compenstine Posted March 18, 2014 Posted March 18, 2014 LOL yeap I could that and sell it for around $10
joejoevapekins Posted March 18, 2014 Posted March 18, 2014 Yeah those test leads are cheap. Imagine some one sells them in bulk
Compenstine Posted March 18, 2014 Posted March 18, 2014 And an adapter to for some leads to test voltage load drops The Fluke comes with leads for that, but I could add alligator clip leads that would work
Compenstine Posted March 18, 2014 Posted March 18, 2014 Yeah those test leads are cheap. Imagine some one sells them in bulk Yes they are and I know a source for those from my other hobby of micro robotics Mouser Electronics
joejoevapekins Posted March 18, 2014 Posted March 18, 2014 The Fluke comes with leads for that, but I could add alligator clip leads that would workmine no longer work. I had a uhoh lol. Melted the clips off at work checking some 3 phase fuses
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now