DNA 20 PSB

[Compenstine]

Any one here ever use this in a MOD or have a device using this chip set?



3Rutez mentioned it to me when I briefly mentioned the MOD I'm working on. I was going to build my own basic board to do what I needed but this may be a better option. Just wondering if anyone here has worked with it and had any thoughts on it. The one thing I don't like so much is it being VW with a low end cap of 7 watts.

Edited November 19, 2013 by Compenstine

[Proetus]

Here ya go chief

http://m.youtube.com/watch?v=Bk4AbFScKK8

[Compenstine]

LOL Yes I saw Pete's vid it was part of my research on the chip. Thanks for adding it, I should have but when I thought to the edit was gone

Here is PDF file for those interested EVOLV DNA 20 Data Sheet

Edited November 19, 2013 by Compenstine

[Proetus]

http://www.howder.com/milo-dna20d.pdf

Step by step to build one

[Compenstine]

That was one I didn't see last night. Thanks for link Proetus very good guide.

Edited November 19, 2013 by Compenstine

[Proetus]

Bunch of em on Ecf under battery mods.

[Proetus]

Damit Compenstine, now i want to build a DNA20 mod instead of buying one.

[Compenstine]

Been looking over there, thanks for pointing out what section to look in. Found some helpful info there. I still may go with this but the DNA 12 may be a better all around option for what I'm doing. I don't know.... May just get one of each and see which is better for my build. They both have pluses and minuses. The OLED display on the 20 is the one thing the 12 is missing that I want in this build. The 12 has the lower ranges and can do sub ohm.

Damit Compenstine, now i want to build a DNA20 mod instead of buying one.

LOL

Edited November 19, 2013 by Compenstine

[Compenstine]

So far the best price I have found is at The House of Vapor for the DNA 20, The 12 is best at the Evolv site same with the USB charging board.

[Proetus]

The 20 goes sub ohm as well!

[3Rutez]

The DNA20 chip has been creating quite the stir, and so many people are building their own mods that utilize the chip. My favorites so far are the NES controller mods. One guy even fabricated a drip tip to compliment his. It is a Mario coin box with a toadstool sitting on top. Just awesome. All of the box mods are going for $150 upwards to $280, and they can't build them fast enough.

[Proetus]

Well parts alone will run roughly $100. I imagine buying in bulk will bring that down. However building your own allows for custom options like buttons, fire button, floating 510 connection as well as placement of buttons!

[3Rutez]

Like this M57 Clacker mod? lol. The creativity is amazing when it comes to mods.

[3Rutez]

Here is a pic of that NES controller mod I was talking about.

[Compenstine]

Those are cool. It's stuff like this that keeps me pounding away at my project.

[Proetus]

I dig the nes controller, been looking at those awhile. While I admire the clacker for the build quality and just general coolness, I couldn't use it. Would sit on the table!

[Proetus]

Bought my board today! Hunt for buttons begins!

[Proetus]

It arrived! Smaller then I thought it would be!

[WillBlack]

The 20 goes sub ohm as well!

Where you people coming up with this??

The DNA12.

Atomizer Resistance 1.1 Ohms (minimum)

The DNA20.

Atomizer Resistance 1.0 Ohms (minimum)

And what kind of of sub ohm vaping could you do with with the DNA12's ~ 11.5W output anyway?

[Compenstine]

Where you people coming up with this??

The DNA12.

The DNA20.

And what kind of of sub ohm vaping could you do with with the DNA12's ~ 11.5W output anyway?

You are right I stand corrected. I just re-looked at the Data sheet. I'm not sure where I thought the 12 went sub ohm but heh pays to read this stuff when I'm not so tired. I really don't see how the watts could be that big of issue. Just saying. For someone that was realllllly wanting to cloud chase I could, but for me anyway, it wouldn't matter that much that it only went to 11.5 watts.

Edited December 9, 2013 by Compenstine

[Proetus]

The specs read 1ohm, but in reality they will fire down to .6!

[Proetus]

With family on the way and christmas here soon, the build and parts buying are on hold until Jan unfortunately.

[Compenstine]

I won't be able to do my build till next year either but having these now:..

1 DNA 20

1 DNA 12

2 x USB Charger chips

puts me a lot closer to getting it done.

[Proetus]

Are those the evolv charge boards? They work fine, however they are slow. They only charge at 500 milliamps, with dual 18650's will take 10-12 hours.

Couple pieces for you to look at

Screen Cradle

1 amp charger

Battery Holder

[Compenstine]

Thanks for the heads up and the links. Good info. Not sure yet if I'm going with dual 18650s. Size may be a issue for my mod trying to do two.

Edited December 11, 2013 by Compenstine