Possible issue with center pin

[lmaddox]

I am using a lavatube and an inferno, both of which seem to have the same issue. The lights work as expected on the lavatube. On the inferno, the light blinks when I try to activate it (I'm not sure if this is normal). Although the lights seem to work on both devices, neither get hot or produce vapor. After googling these symptoms, I believe that I may have over-tightened the tops, causing the center pins to stop making contact and completing the circuit. Therefore, I followed the instructions here (http://vapingguides.com/blog/vapor-trails-2/atomizer-and-cartomizer-connection-problems/), but to no avail. Please advise.

[Tam]

When you first turn on the device (click five times fairly quickly), your device should turn either on or off. Once you do that and you click once you should see the button light up if it's on.

If it was on when you clicked the button five times the button should blink several times to tell you it was shutting down. Then, when you push the button once the button should remain dark to tell you that it's off.

Is this what you were talking about when you asked about it blinking?