shen_long86 Posted December 18, 2018 Share Posted December 18, 2018 There is this other mesh from a place called OFRF (pronounced "off") that is supposed to be better than the wotofo. I've tried both and the difference isn't that great. I watched a bunch of videos about wicking this RDA and came to the conclusion that I needed a lot more cotton than was being suggested. The wotofo cotton pulls through super tight, and I leave a lot of the excess, well past the side of the build deck. I find it allows me to get close to 15 drags before needing to drip/squank. When I followed the directions on youtube and cut the excess cotton to the shape of the build deck, and pushed the ends into the wells, it was taking away from the cotton mass centered under the mesh coil. That resulted in some nasty dry hits. I think with this RDA there's no such thing as too much cotton (within reason).Well I will have to try your method then, because I was following the youtube method and getting dry hits left and right. I do love mesh and have a Vandy Vape Mesh rda that I love. (Used it so much I melted the indsulators...lol) Currently I am using my Profile on my Gloomtem mod with a single staged coil and it works great. I will go later today and throw another mesh coil in and give your wicking method a try. Thanks again for the help. Link to comment Share on other sites More sharing options...
smacksy Posted December 22, 2018 Share Posted December 22, 2018 Good morning y'allWell I got my Wismec RX Reuleaux Gen3 in my vape mail yesterday.. its shorter and more compact than my older rx200s.. up to 300 watts and fits very comfortable in my hand for a 3 battery mod.. the wismec sub ohm tank that came in the starter kit seems to be working okay at 80w with King cookie juice…. I like my cloud Beast tanks a little better from smok, but I'm very happy with the mod itself.. might say a Christmas present from me to me, lol shen_long86 1 Link to comment Share on other sites More sharing options...
shen_long86 Posted December 24, 2018 Share Posted December 24, 2018 Good morning y'allWell I got my Wismec RX Reuleaux Gen3 in my vape mail yesterday.. its shorter and more compact than my older rx200s.. up to 300 watts and fits very comfortable in my hand for a 3 battery mod.. the wismec sub ohm tank that came in the starter kit seems to be working okay at 80w with King cookie juice…. I like my cloud Beast tanks a little better from smok, but I'm very happy with the mod itself.. might say a Christmas present from me to me, lol Very nice setup@smacksy smacksy 1 Link to comment Share on other sites More sharing options...
smacksy Posted December 24, 2018 Share Posted December 24, 2018 Also got this reuleaux RX dual 230w in my vape mail Saturday.. I'm really liking this little gold mod, shen_long86 1 Link to comment Share on other sites More sharing options...
shen_long86 Posted December 24, 2018 Share Posted December 24, 2018 Also got this reuleaux RX dual 230w in my vape mail Saturday.. I'm really liking this little gold mod, I like the look of that mod. smacksy and Walt 2 Link to comment Share on other sites More sharing options...
smacksy Posted December 24, 2018 Share Posted December 24, 2018 I like the look of that mod.Thx!Got both mods as Christmas gifts... I've always enjoyed vaping 2 mods at the same time with different flavors to avoid flavor burnout vaping the same flavor all day long.. I really like these two, one with King Cookie and the other with Pina Colada.. appreciate your reply bro! Walt and shen_long86 2 Link to comment Share on other sites More sharing options...
shen_long86 Posted December 24, 2018 Share Posted December 24, 2018 Thx!Got both mods as Christmas gifts... I've always enjoyed vaping 2 mods at the same time with different flavors to avoid flavor burnout vaping the same flavor all day long.. I really like these two, one with King Cookie and the other with Pina Colada.. appreciate your reply bro! You are quite welcome... I do the same thing as well with 2 mods. When one flavor gets old I switch to the other. smacksy 1 Link to comment Share on other sites More sharing options...
Foofightervapegirl1 Posted December 29, 2018 Share Posted December 29, 2018 Just got the Zeus dual RTA from geekvape. I really like it so far. And it does not leak! Seemed like no matter how good a wicking job I did on the griffin it was always leaking. If you are an airflow hog,you will love it. shen_long86 1 Link to comment Share on other sites More sharing options...
Earthling789 Posted February 26, 2019 Share Posted February 26, 2019 Received my SMOK Mag 225W TC kit in Royal Purple with matching TFV12 Prince tank (cobra edition) from 101Vape, and it's the right-handed version, so you can view the screen (and not push buttons accidentally) when you hold it in your right hand I'm loving the trigger design and ease of swapping batteries via the "semi-auto magazine-style" holder. The tank is taking some getting use to, due to the massive air-flow and super-huge drip-tip design/style... but I do like the 8ml capacity and ease of filling... compared to my go-to Toptank Minis... I also received a new SMOK TFV8 Baby Beast V2 in Gold (to add some zing to the purple mod), along with a couple boxes of Kanger SSOCC coils in 1.2 Ohm (for the wife), and two boxes of SMOK coils... one for the TFV12 (Q4 0.4 Ohm SS quad-coil) and one for the TFV8 V2 (S1 0.15 SS single mesh coil). Link to comment Share on other sites More sharing options...
VapeMama Posted March 19, 2019 Share Posted March 19, 2019 Decided to give squonking a try. My Fuchai 213 Squonk kit came today. (Why is it when you're waiting on vape mail the mail is always late??!!) I got the yellow color, though it's more gold than yellow. Also got a Dead Rabbit RDA. The reviews of the Cube RDA (that came in the kit) weren't particularly favorable for whatever reason, but it's working well so far, of course it's only been a couple of hours! I have the Rabbit if the Cube falls out of favor! The mod is comfortable to hold, menu easy to navigate, I'm good to go! Walt and Tam 2 Link to comment Share on other sites More sharing options...
cany Posted March 21, 2019 Share Posted March 21, 2019 I always wanted a squonker Link to comment Share on other sites More sharing options...
VapeMama Posted March 21, 2019 Share Posted March 21, 2019 @cany, I got this one because it wasn't too expensive. #1 I didn't want to spend more than a certain amount, and #2, if I decided I really didn't care for squonking I didn't want to have a lot of money tied up in it. That being said, I DO enjoy this style of vaping. Go for it Cany! Link to comment Share on other sites More sharing options...
cany Posted March 23, 2019 Share Posted March 23, 2019 On 3/21/2019 at 12:19 AM, VapeMama said: @cany, I got this one because it wasn't too expensive. #1 I didn't want to spend more than a certain amount, and #2, if I decided I really didn't care for squonking I didn't want to have a lot of money tied up in it. That being said, I DO enjoy this style of vaping. Go for it Cany! Thanks @VapeMamaIm gonna give it a shot VapeMama 1 Link to comment Share on other sites More sharing options...
J. Jay Posted July 8, 2019 Share Posted July 8, 2019 Who love contest? I love contest very much..Just tell me about it..I will join it for sure. Just want share 1 contest I found: https://www.nastyjuice.com/nasty-shisha-contest/ Link to comment Share on other sites More sharing options...
shen_long86 Posted February 29, 2020 Share Posted February 29, 2020 Sorry I haven't been around alot. But this is my one off custom lipo stabwood dna 250c that I got a while back. I love this mod, the battery lasts a long time and it hits like a truck. Link to comment Share on other sites More sharing options...
cany Posted March 1, 2020 Share Posted March 1, 2020 Welcome back shen thats a cool looking mod shen_long86 1 Link to comment Share on other sites More sharing options...
shen_long86 Posted March 1, 2020 Share Posted March 1, 2020 Thank You@cany Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now