olivestab Posted October 10, 2013 Share Posted October 10, 2013 Hello, I recently switched to an evod tank and I am very pleased with the performance of it.Today I realized my battery was not making a connection with the evod atomizer…When I press down, the battery will light up, but blink a few times after 3 seconds, there is no vapor.If I unscrew the whole unit from the battery, and try to vape with the tank barley on top of the battery, IT WORKS!?! very weird. Is there any explanation for this?I am using a Buck Naked E Express battery, (the smaller common size) with a kangertech top. (Evod)The atomizers are the 1.8ohm resistance Coil units from kangertech.The battery works with my first top, the plastic whics.I have been using the kangertech evod for 3 days now, and I just switched the atomizer yesterday and it worked.I charged my battery before I went to bed, woke up and set it up as usual and the problem started.Im not sure what the problem could be because I used the EVOD with the new atomizer all last night… Link to comment Share on other sites More sharing options...
Christie Posted October 10, 2013 Share Posted October 10, 2013 Maybe the post inside the battery got pushed down too far, can you pry it up a little bit with the tip of a steak knife one side at a time ,( EASY DOES IT ) then try it .Sometimes they get pushed in and wont make a good connection with the atomizer . yaqub azid 1 Link to comment Share on other sites More sharing options...
rcoe Posted October 10, 2013 Share Posted October 10, 2013 Be gentle....you only have to move it up a mm or two (Wow...that didn't sound right at all) Jeffb and Tam 2 Link to comment Share on other sites More sharing options...
BirdDog Posted October 11, 2013 Share Posted October 11, 2013 Maybe the post inside the battery got pushed down too far, can you pry it up a little bit with the tip of a steak knife one side at a time ,( EASY DOES IT ) then try it .Sometimes they get pushed in and wont make a good connection with the atomizer . I don't advise using any type of knife. A bit of a slip and stab yourself hazard. You can use tweezers or a small flat head screwdriver. Link to comment Share on other sites More sharing options...
Aquatroy Posted October 11, 2013 Share Posted October 11, 2013 Actually a paper clip works great grabs enough to pull it up... Link to comment Share on other sites More sharing options...
BirdDog Posted October 11, 2013 Share Posted October 11, 2013 Actually a paper clip works great grabs enough to pull it up... That is a great idea! Of course they are always around when I don't need one and never around when I do! Aquatroy 1 Link to comment Share on other sites More sharing options...
olivestab Posted October 11, 2013 Author Share Posted October 11, 2013 yeah it seems to be a connection issue, but when I pry it up using a paper clip, it doesnt fix it completely. I still need to start the battery button, THEN screw it on untill I hear it burn, and then only can i use it. but now the EVOD is kinda loose and its just completley stupid. I have to use my vapor pen with the top of it jiggling around. After learning about vapors this past week, I feel so cheated from what I purchased. I payed 50$ for a chapstick sized battery that came with those ****ty whicked top, a case, and a charger! It wasnt until after that my wife bought one out of jealousy, that we started to learn more and more. I wish I would have bough a "normal" brand instead of this buck naked pice of crap. Its no wonder why they where so adamant on their 6 month warrantee. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now