Grant951 Posted September 29, 2013 Share Posted September 29, 2013 (edited) Hi guys! I was at my B&M last night and they had a new tank I've never seen before. It's called an H2. It's a plastic bottom feeder and takes Evod coils (found out this morning that Protank Coils work as well, but more on that later). The draw is just right for me. It's a little tighter than a T2, but not nearly as tight as a Vivi. It produces a great hit, I get a little more vapor than a T2 I'd say. The design is really cool! When it's empty you can't really tell where the center shaft is. It looks like the juice would just fall out! Even when it's full you can see the vapor coming up all the way through it, it's cool to see. The coil I got with it started leaking into the center shaft but I am guessing it was just a bad coil (no surprise there). I did put a Protank coil in it this morning and it was kind of tight when putting it into the center shaft, but it screwed onto the tank just fine and hits even better than the Evod coil it came with, no leaks so far. Overall, as of now I would definitely buy a few more. They're very neat to look at and watch the vapor, and you'll know the minute you have a bad coil because you can see if it is leaking into the shaft. They're like $5 online, but I haven't seen any vendors I'm familiar with carrying it yet (I guess it's pretty new?). Pick one up if you see it, they're very neat! Here are some pictures. I don't know anything about this website so I wouldn't order from it but you can atleast check it out. http://www.greensoundtech.com/new_detailed-30.html Edited September 29, 2013 by Grant951 Tam 1 Link to comment Share on other sites More sharing options...
edmoon Posted January 17, 2014 Share Posted January 17, 2014 as far as i know, its production cost is very low, but the structure can avoid leaking problems Link to comment Share on other sites More sharing options...
Recommended Posts