Grant951 Posted August 21, 2013 Share Posted August 21, 2013 Okay so I have a 1000mah from vape dudes and there is something wrong with it. I think the contact in the battery is loose or something because when I try it with my T2 it doesn't work, however my vivi nova does work with it, I think because the contact know the vivi pushes it down more. Whenever I plug it into my charger the light just stays green on the charger and the led on the battery blinks for awhile and then just stays on. Does it sound like it's charging? I've been using my other battery so I haven't actually drained the other one yet. Link to comment Share on other sites More sharing options...
spydre Posted August 21, 2013 Share Posted August 21, 2013 Sounds like the center post may have gotten pushed down a bit? Link to comment Share on other sites More sharing options...
Christie Posted August 21, 2013 Share Posted August 21, 2013 I have found that any tank I use after my vivi doesn't make contact ,.the spring on the nova is too taught and too much pressure is required to push it in enough to catch the threads - Link to comment Share on other sites More sharing options...
Aquatroy Posted August 21, 2013 Share Posted August 21, 2013 I have found that any tank I use after my vivi doesn't make contact ,.the spring on the nova is too taught and too much pressure is required to push it in enough to catch the threads - Can you tell me where the spring is located on a vivi nova? Tam 1 Link to comment Share on other sites More sharing options...
Grant951 Posted August 21, 2013 Author Share Posted August 21, 2013 Yes Christie, I'm kind of confused by your post. Link to comment Share on other sites More sharing options...
IMEDICx90 Posted August 21, 2013 Share Posted August 21, 2013 ok your center post has just been pushed down. you can use a paper clip and raise it back up. Remember you dont have to make everything "hammer tight" (foundry terminology) just make it snug. if you over tighten it you will ultimately move the center post. Link to comment Share on other sites More sharing options...
wizard46304 Posted August 21, 2013 Share Posted August 21, 2013 Ahhh, indeed, lol. I haven't been able to use my ego t with my Davide's for 2 days. Thanks for the fix. Link to comment Share on other sites More sharing options...
Christie Posted August 21, 2013 Share Posted August 21, 2013 (edited) look right here , if you push on this thingy it has a spring , behind it into the base . as you screw this vivi tank when the threads tighten down it applies pressure to the spring and in turn the spring gives presure back -mine is too tight , the spring isnt giving enough so it pushes down on the battery post causing it to invert into the base .that makes it a hair too far down to make good connection to the charger post( or the next tank ) .Im not good at explaining things So if it doesnt makes sense Im sorry. Edited August 21, 2013 by Christie Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now