bcartervol98 Posted August 2, 2013 Share Posted August 2, 2013 Ok taking the plunge. Have watched the videos, asked questions, and think I basically get it. I have a couple 510 attys and drip tips at home in the mailbox and a couple drip shields just came in to me here at work. Any tips or suggestions will be greatly appreciated. Tam has already gone over how to clean the 510s to get the primer out and get them ready to drip, but this will be my first time ever doing it so if there are any tips let em fly! Thanks in advance! Link to comment Share on other sites More sharing options...
IMEDICx90 Posted August 2, 2013 Share Posted August 2, 2013 Treat it like a clearo. Put a few drops in the atty let them soak... Put in a couple more and give it a pull. you will love it!!!!! Link to comment Share on other sites More sharing options...
Jeffb Posted August 2, 2013 Share Posted August 2, 2013 Drip, vape, repeat Link to comment Share on other sites More sharing options...
bcartervol98 Posted August 2, 2013 Author Share Posted August 2, 2013 (edited) Mainly trying this so I can try flavors without messing up a coil with flavors I dont like lol. I have a feeling the side effect will be me learning more about attys and stuff like that, especially if it performs as great as everyone says! And in before "Penicillin will fix that" LOL Edited August 2, 2013 by bcartervol98 Link to comment Share on other sites More sharing options...
tapout Posted August 2, 2013 Share Posted August 2, 2013 I think to get the most taste out of vaping dripping is the best just my opinion tho Link to comment Share on other sites More sharing options...
edgie13 Posted August 2, 2013 Share Posted August 2, 2013 Good luck! I look forward to trying this one day, also. Link to comment Share on other sites More sharing options...
Thesheepdog Posted August 2, 2013 Share Posted August 2, 2013 with so many flavors to try and not unlimited cartos; it does seem to make sense to drip. After you figure it out you may need to give me those lesson links so I can learn about it! It would save lots of poor boge cartos ! Link to comment Share on other sites More sharing options...
bcartervol98 Posted August 2, 2013 Author Share Posted August 2, 2013 When you change flavors, do you just wait until you do not get any vapor from the previous flavor, then just drip the new flavor in with no cleaning or anything? Link to comment Share on other sites More sharing options...
bcartervol98 Posted August 2, 2013 Author Share Posted August 2, 2013 with so many flavors to try and not unlimited cartos; it does seem to make sense to drip. After you figure it out you may need to give me those lesson links so I can learn about it! It would save lots of poor boge cartos ! Yea, and I do not use cartos I use clearomizers and I have never been able to wash wicks and get the taste of the prior juice out so if I end up not liking a flavor I have been throwing away the wick, soaking the tank in alcohol, and putting in a new wick. This should save me a few $$$ on that too. I can know what I think of a flavor before committing one of my 30 odd tanks to it lol. Link to comment Share on other sites More sharing options...
MACHOSTALLION Posted August 2, 2013 Share Posted August 2, 2013 I've been wanting to try this as well. Could someone give me a link to the attys or whatever is needed to do this. All I have are batteries with 510 connections. Link to comment Share on other sites More sharing options...
bcartervol98 Posted August 2, 2013 Author Share Posted August 2, 2013 I've been wanting to try this as well. Could someone give me a link to the attys or whatever is needed to do this. All I have are batteries with 510 connections. Attys I got: http://www.theveteranvaper.com/joye-510-atomizer-matte-black/ Drip Tips http://www.theveteranvaper.com/510-short-delrin-drip-tips/ Drip Shields I got http://www.sweet-vapes.com/shop?page=shop.product_details&flypage=vmj_color_plus.tpl&product_id=1537&category_id=63 Pretty basic setup before I jump in with both feet lol. Link to comment Share on other sites More sharing options...
MACHOSTALLION Posted August 2, 2013 Share Posted August 2, 2013 Thanks for the links. So once it's all assembled, how do you perform the "drip"? Or do you drop into the atty and then assemble the shield and tip. I may give this a shot next time I order supplies. Link to comment Share on other sites More sharing options...
bcartervol98 Posted August 2, 2013 Author Share Posted August 2, 2013 My understanding is the drip tip is so you can drip into it. Then gently blow into it to make sure the liquid makes it down to the coil. The Atty is screwed on the battery, shield slipped over it, then the drip tip is attached. Drip a few drops into the drip tip, give them a few seconds to reach the bottom, and vape until you get a metallic taste then redrip. I have also been instructed to keep fruit and heavier flavors separated into separate attys. Rixter 1 Link to comment Share on other sites More sharing options...
bcartervol98 Posted August 2, 2013 Author Share Posted August 2, 2013 Ok cleaned primer out and understand the concept. When I slide the drip shield on I can't get any air to get a hit. It is literally like sucking on a straw with my finger covering the other end. Gonna try it later when I get back home from this damn birthday party we got committed to go to. With or without the drip shield. Link to comment Share on other sites More sharing options...
Rixter Posted August 2, 2013 Share Posted August 2, 2013 (edited) Ok cleaned primer out and understand the concept. When I slide the drip shield on I can't get any air to get a hit. It is literally like sucking on a straw with my finger covering the other end. Gonna try it later when I get back home from this damn birthday party we got committed to go to. With or without the drip shield. I think I can help diagnose your problem with the drip shield, but first I need to know what PV you're using and which drip shield you have. A picture of your setup would be helpful if you could post it. BTW, the drip shield is optional...it basically acts as a reservoir for extra juice and prevents leaking from the bottom of the atty from running down the side of your battery and all over you. As long as you're just adding 3-4 drops at a time and vaping that down before adding more, you shouldn't have much of a leaking problem. Edited August 2, 2013 by Rixter Link to comment Share on other sites More sharing options...
Aquatroy Posted August 3, 2013 Share Posted August 3, 2013 Oh the drama!! And now we have to wait for a birthday party? Tune in later for dripping with carter!!lol buddy waiting to learn from you! Patricia, Tam, tzymroz2013 and 1 other 4 Link to comment Share on other sites More sharing options...
Bebop Posted August 3, 2013 Share Posted August 3, 2013 Can't believe he left us hanging like this! Love2VapeDaily and Tam 2 Link to comment Share on other sites More sharing options...
Bebop Posted August 3, 2013 Share Posted August 3, 2013 Btw. I don't use a drip shield either. There actually is a learning curve but its pretty short and you develop the timing to add more drips and when you can change flavors. I actually am getting in to it now. I crack open my juice box and just vape thru flavors, maybe testing those juices that have steeped for a while. I actually discovered one of my really perfumey early purchases came out ok after a couple of months. It's a great way to test new flavors. I also will make a little mini mix of a couple of flavors and check them out and if I like them i'll mix up a batch and fill a Clearomizer . Link to comment Share on other sites More sharing options...
bcartervol98 Posted August 3, 2013 Author Share Posted August 3, 2013 Something is not right here lol. I dripped about 3 drops in and got a couple good hits. Then I dropped a few more drops in and all I get is gurgling. No vapor. Not sure what I am doing wrong. Battery and button getting super hot too. Link to comment Share on other sites More sharing options...
IMEDICx90 Posted August 3, 2013 Share Posted August 3, 2013 (edited) well the gurgling is the atty flooding. You will get a dry hit if you take the drops too far but once you get that dry hit you learn how many pulls you can get out of those few drops. are you making sure that your drip shield was made to go over your eGo thread? they make specific ones just for that. I bought mine from empire mods. This is the one i bought: http://www.Empiremods.com/product_p/emegodriphex.htm It's meant to fit over your ego threads without an adaptor, so it does cut off your airflow. If you dont have one thats meant for that just take it off. you will be perfectly fine without it. EDIT: OHHHH another thing!!!! In the side of the drip shield you should see some small holes punched in the side of it. MAKE SURE YOU LINE THOSE UP WITH THE AIRFLOW HOLES ON THE ATTY!!! i just had my atty choke out on me bc i didnt do that. Edited August 3, 2013 by IMEDICx90 Link to comment Share on other sites More sharing options...
bcartervol98 Posted August 3, 2013 Author Share Posted August 3, 2013 I'm not using the shield, apparently I put too much in. I already can tell the flavor is infinitely better. Brian sent me a 306 (I think) too gonna try that one next. Not using a drip shield since apparently the ones I bought require a 510-510 adapter. Good thing I ordered two more today. Learning lol. I'm getting decent vapor now but still a lot less than with my clearo. I am still figuring this out haha Link to comment Share on other sites More sharing options...
IMEDICx90 Posted August 3, 2013 Share Posted August 3, 2013 the vapor may not be on par until you learn how to hit it just right. but its a lot of fun and so much better flavor! Link to comment Share on other sites More sharing options...
Tam Posted August 3, 2013 Share Posted August 3, 2013 I think I can help diagnose your problem with the drip shield, but first I need to know what PV you're using and which drip shield you have. A picture of your setup would be helpful if you could post it. BTW, the drip shield is optional...it basically acts as a reservoir for extra juice and prevents leaking from the bottom of the atty from running down the side of your battery and all over you. As long as you're just adding 3-4 drops at a time and vaping that down before adding more, you shouldn't have much of a leaking problem. He got the drip shield from Sweet-Vapes. It says, "Originally for 901 atomizers, but they work perfectly with 510 atomizers on an eGo battery or on any mod via a 510-510 adapter." and I think that's the problem here. He doesn't have a 510-510 adapter so the bottom O-ring of the shield isn't clearing the air holes, it's sitting right on them. I did recommend he get the drip shield from Keith over at Empire Mods... Link to comment Share on other sites More sharing options...
Tam Posted August 3, 2013 Share Posted August 3, 2013 EDIT: OHHHH another thing!!!! In the side of the drip shield you should see some small holes punched in the side of it. MAKE SURE YOU LINE THOSE UP WITH THE AIRFLOW HOLES ON THE ATTY!!! i just had my atty choke out on me bc i didnt do that. Really? I've never had that problem with the shield you linked to. I have one of those as well. Are you sure your shield was all the way down? If it wasn't then that could've been the problem. Add just a touch of juice to the inside of the bottom O-ring and it should slide down and sit where it's supposed to. I've never lined up the air holes and get a great draw without tightness. Link to comment Share on other sites More sharing options...
Tam Posted August 3, 2013 Share Posted August 3, 2013 I'm not using the shield, apparently I put too much in. I already can tell the flavor is infinitely better. Brian sent me a 306 (I think) too gonna try that one next. Not using a drip shield since apparently the ones I bought require a 510-510 adapter. Good thing I ordered two more today. Learning lol. I'm getting decent vapor now but still a lot less than with my clearo. I am still figuring this out haha B? That quote I put up is from the two that you just ordered. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now