Loucous Posted February 10, 2013 Share Posted February 10, 2013 So I ordered a Vivi Nova 3.5ml tank online. When I received it I took the caps off and examined it just to see what was what and then filled her up and vaped away. I probably vaped about 1-1.5 mil of juice yesterday and it was working great giving great flavor and tons of tape. And then all the sudden this morning it did not fire. So I figured the battery was dead and put the bat on the charger and hooked the Vivi Nova up to a second eGoT bat and still nothing. I tried another tank on the same bat. and it worked fine so now I know the problem is in the tank. So I syringed out the juice and removed the atty and replaced it with a fresh one, refilled the tank and still nothing. I don't really know what else to do, so right now I have a one day old useless tank. Anyone else had an issue like this before? Link to comment Share on other sites More sharing options...
Tam Posted February 10, 2013 Share Posted February 10, 2013 (edited) Just a thought but the battery might not be getting a solid connection to your Vivi Nova. If you look at the bottom of the tank where it connects to the battery you'll see a small round thing. Using a flat head screw driver (one of those that work with the screws on eye glasses are great), very slowly and carefully push up just a little at a time while rotating the tank so you do it evenly. You can also do this with the round battery connector inside the battery. That might help? Good luck! Edited February 10, 2013 by Tameiki Link to comment Share on other sites More sharing options...
Loucous Posted February 10, 2013 Author Share Posted February 10, 2013 Actually, I believe this was the problem. But with the tank rather than the battery. I wasnt able to raise the battery connector but I was able to lower the tank's connector by taking it apart and removing the atty and then inserting a very small screw driver in there and pushing down, the tank connecter came about 1/8 of and inch out and now is making contact with the battery and back working again. Thanks for the reply, vape on. Link to comment Share on other sites More sharing options...
Tam Posted February 10, 2013 Share Posted February 10, 2013 Glad it helped! Link to comment Share on other sites More sharing options...
mcquinn Posted February 10, 2013 Share Posted February 10, 2013 Mine quit on me and I found out I didn't have the element screwed on tight enough and removing the top loosened it .I remove the rubber ring and snug it with a screwdriver now. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now